Troubleshooting - MC Crypt DJ-60-PC Bedienungsanleitung

12. Troubleshooting

In purchasing the Mc Crypt DJ Mixer, you have acquired a reliable product which has been designed using state-of-
the-art technology.
Problems and malfunctions may, however, still arise.
We would therefore like to describe how you can eliminate certain malfunctions yourself.
Always follow the safety instructions carefully.
Device does not work after the POWER (16) switch is switched on
• Power unit has not been plugged into the socket correctly > Connect the power unit correctly
• Mains socket is not live > Check mains socket
The mixer is switched on but the sound is inaudible
• No input signal > Check the signal source
• Incorrect input selected > Select the correct input using the input selection switches (1)
• Input level set incorrectly > Set level using the GAIN control as described (3)
• MASTER control (9) is in position "0" > Set MASTER control (9) correctly
• Channel faders (12) are set to minimum > Set channel faders (12) correctly
No signal can be heard although the level display (2) indicates a signal
• Subsequent device (amplifier) not switched on or incorrectly set > Check subsequent device, select correct input
on the amplifier, increase volume
• Output incorrectly connected or not at all > Connect output as described
Humming sound can be heard
• The record player earth cables are not connected to the GND earth screw terminals (18) > Connect the record
player earth cables to the GND screw terminals (18)
• A humming loop arises between the connected devices > Connect signal earth by means of a special earth-
insulated cable
One channel is not working
• Connection cable has become detached > Check connections between the devices
• The balance control on the amplifier is out of adjustment > Set balance control on amplifier correctly
44