Tb82Te (Two-Electrode) Default Configuration - ABB TB82 Serie Bedienungsanleitung

ABB

TB82TE (Two-Electrode) Default Configuration

Default Configuration
Parameter Default
BASIC
Mode
Conductivity
Analyzer
Concentration
Cell constant 0.01
Analyzer input
Pt 1000
Temperature Sensor
Manual
Temperature
Compensation Type
0.01 Cell Constant
Output
4 mA = 00.0 µS/cm
20 mA = 199.9 µS/cm
0.10 Cell Constant
4 mA = 00.0 µS/cm
20 mA = 1999 µS/cm
1.00 Cell Constant
4 mA = 00.0 mS/cm
20 mA = 19.99 mS/cm
00.5 seconds
Damping
Off
Diagnostics
Fail low
Safe Mode*
0% Spike Magnitude
Spike*
Note: Alternatives in Italics are available in ADVANCED mode only
* Safe Mode and Spike functions not available on fieldbus versions
TB82COND-ATEX-EN-A
TB82 Conductivity Series ATEX Product Instruction Manual
Alternative
ADVANCED
User defined concentration via non-linear function
generator, %, ppm, ppb or units of choice
Adjustable cell constant 0.01 to 9.99
None
Pt 100 RTD
3k ohm Balco
Auto
Standard KCl
Coefficient: 0 to 9.99%/°C
Reference temperature other than 25° C
Pure water – neutral (for 0.01 Cell Constant)
Pure water - basic (for 0.01 Cell Constant)
Pure water - acidic (for 0.01 Cell Constant)
User defined
Manual to a temperature other than 25° C
Conductivity adjustable from 0-1.000 µS/cm to 1999
mS/cm
Concentration units (minimum 1%/weight span)
Adjustable to 99.9 seconds
On
Fail high
0 to 100% magnitude
19