Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33
Thank you for buying a Concept product. We hope you will be satisfied with our product throughout its
service life.
Please read these instructions carefully before you switch on your appliance and keep them for future
reference. Make sure other people using the product are familiar with these instructions.
Technical parameters
Voltage
230V/50-60Hz
Power input

IMPORTANT NOTICES:

• Make sure the mains voltage corresponds to the values on the rating plate. Use an earthed socket only.
• Do not immerse the electrical parts into water or any other liquid.
• Before you fill the deep fryer with oil or fat and connect it to the power, make sure all parts are completely dry and no
water drops have remained in the frying bin.
• Connect the fryer to the power only after filling it with oil or fat. The level of oil or fat must always be within the range
indicated by the minimum and maximum marks. Before you start frying, make sure each time that there is enough oil
or fat in the fryer.
• Only use oils or fats suitable for frying. If you wish to put a new dose of hardened fat in the frying bin, first melt the fat
on your stove and then pour it in the fryer, which is switched off. Only then do you switch the deep fryer on.
• Make sure not to overfill the basket because hot oil or fat might boil over the bin.
• When using the fryer, keep it out of the reach of children and pay attention to it constantly.
• Do not move a fryer that is switched on or has hot contents in it.
• Do not touch hot surfaces. Use the handles and buttons.
• Make sure the steam-ducting grid in the lid is not blocked.
• When you finish deep frying, set the temperature controller to minimum, disconnect the fryer from the power and
do not touch it until it cools down. You may pour the oil out of the fryer bin only after it has cooled down completely.
When pouring the oil out, do not leave the bin in the fryer, but remove it and then pour the contents out.
• Always disconnect the fryer from the power and let it cool down after use or before maintenance.
• When you disconnect the fryer, never do so by pulling on the cable, but take hold of the plug. Do not leave the power
cord hanging loose.
• Make sure that the fryer and cable do not touch any hot surfaces.
• Only use the deep fryer for the purpose described in the instructions for use. Only use the fryer together with the
original accessories supplied. The fryer has been designed for household use only.
• Do not use the fryer if you discover that the plug or cord is faulty. Contact an authorized service centre.
Non-compliance with the manufacturer's instructions invalidates your right to guaranty repair.
26
2100 W
EN
FR2025

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis