Manufacturer's Information; Transport; Delivery And Performance; Storage - Gemü R647 Original Einbau- Und Montageanleitung

8

Manufacturer's information

8.1

Transport

Only transport the valve by suitable
G
means. Do not drop. Handle carefully.
Dispose of packing material according
G
to relevant local or national disposal
regulations / environmental protection
laws.
8.2

Delivery and performance

Check that all parts are present and
G
check for any damage immediately upon
receipt.
The scope of delivery is apparent from
G
the dispatch documents and the design
from the order number.
The valve's delivery condition:
G
Control function:
5 Opened by operating pressure
The performance of the valve is checked
G
at the factory.
8.3

Storage

Store the valve free from dust and
G
moisture in its original packaging.
Avoid UV rays and direct sunlight.
G
Storage temperature: see chapter 6
G
"Technical data".
Solvents, chemicals, acids, fuels or
G
similar fl uids must not be stored in the
same room as valves and their spare
parts.
8.4

Tools required

The tools required for installation and
G
assembly are not included in the scope
of delivery.
Use appropriate, functional and safe
G
tools.
9
GEMÜ R647 is a plastic diaphragm valve
with a 2/2-way body. A diaphragm is the
sealing element. The valve is mainly made
of three components, a valve body, a
diaphragm and a cover with control medium
connector. The control medium applies
direct pressure to the diaphragm pressing it
against the valve body weir. The valve body
and the diaphragm are available in various
designs as shown in the data sheet.
Accessories: compensating and mounting
plates, pilot solenoid valve GEMÜ 0324.
10
A
Condition:
undefined
A Actuator
1 Valve body
2 Diaphragm
23 / 36

Functional description

Construction

Construction
Control
medium
connector
R647