Parkside PNTS 1300 E4 Originalbetriebsanleitung Seite 8

GB IE NI
ageing. Do not use the equip-
ment if the cable is damaged or
worn. Danger of electric shock
hazard.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
ied person in order to prevent
hazards.
• Switch the machine off and pull
the plug under the following cir-
cumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance
work or replacing accesso-
ries;
- when the power or extension
cable is damaged; after con-
tact with foreign bodies or in
case of abnormal vibration.
• Never use the mains lead to
pull the plug out of the socket
or to pull the appliance. Protect
the mains lead from heat, oil
and sharp edges.
• Make sure that the mains volt-
age corresponds with the infor-
mation on the rating plate.
• The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
8
CY
(RCD) with a rated leakage cur-
rent of not more than 30 mA.
The following states how damage
to the appliance and possible in-
jury to people can be avoided:
• Ensure that the machine is cor-
rectly assembled and the ilters
are in the correct position.
• Do not use without the ilter.
This could damage the ma-
chine.
• Only use original spare parts
and accessories delivered and
recommended by our Service
Centre (see "Spare parts/Ac-
cessories"). The use of parts by
other manufacturers immediate-
ly renders the guarantee void.
• Only have repairs carried out
at our authorised customer ser-
vice points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.