Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
User Longitude: Specify in this field the longitude of the location where the satellite system
and user is placed using the numeric keypad.
East/West: Change the longitude of your location with ◄Left / Right► arrow keys.
7.
8.
Angle calculation: Press the OK button to start the angle calculation. Please proceed as
described in the following section.
6.10.1. Alignment of the satellite dish using angle calculation
Before using the angle calculation find out the longitude and latitude of the location of the satellite
system, which you want to align.
1.
Turn the satellite dish to face directly to the south with the help of a compass.
2.
Enter the location parameters as in the description and turn the dish the number of degrees
from the Southern exposure in the in "azimuth" displayed direction (e.g. S> E:. 11:51 °):
-62-
Werbung
Inhaltsverzeichnis
