Getting Started; Switching The Internet Radio On/Off; First-Time Setup - Silvercrest SIRD 14 C1 - IAN 114039 Bedienungsanleitung

SilverCrest SIRD 14 C1

Getting started

Switching the Internet Radio on/off

Toggle the main power switch [12] located on the back panel of the Internet Radio to "ON" to
power the Internet Radio on. You can turn the device off by toggling the main power switch [12] to
"OFF". As soon as the main power switch [12] has been moved to "ON", you can press the
VOLUME knob [9] to power the Internet Radio on or switch to standby mode. You can also use the
On/Standby button [35] on the remote control.
Before connecting anything to the Internet Radio, toggle the main power
switch [12] to power it off completely. Once powered off, you can connect all
the cables you want (network cable, etc.).
The instructions on the following pages refer to operations using the Internet
radio buttons. Alternatively you can also use the corresponding remote
control buttons.

First-time setup

When powering the Internet Radio on for the first time, the following shows on the display:
Then you can rotate the NAVIGATE knob [3] to make a selection. Select "YES" and press the
NAVIGATE knob [3] to confirm your selection and launch the setup wizard.
If you select "NO", the next window lets you choose if you want to start the setup
wizard again next time you power the device on.
170 - English