Material Damage; For The Safety Of Your Child; Before Using For The First Time - Silvercrest SCCM 800 A1 Bedienungsanleitung

RP109841 Cupcake Maker LB2 Seite 50 Dienstag, 17. Februar 2015 4:00 16
• Do not move the appliance during use
as it becomes hot. This will ensure you
avoid sustaining any burns.
• Always allow the appliance to cool
down before transporting or cleaning.
• Ensure that it is not possible for anyone
to trip over or to get caught up in or step
on the mains cable
themselves.

4.7 For the safety of your child

Warning! Children are often
unaware of danger and are injured
as a result. Please note therefore:
• Only allow children to use this appliance
under the supervision of an adult.
• Ensure the appliance is always kept out
of the reach of children.
• Ensure that children cannot pull the
appliance down onto themselves with
the cable.
During manufacture, many parts are given a
thin film of oil to protect them. Before using
the appliance for the first time, run it without
cupcakes so that any residues can
evaporate.
Note When heating up for the first few
times, a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance
packaging.
2. Check that the appliance shows no signs
of damage.
3. Clean the appliance before using it for
the first time. Observe the information in
the section entitled "7. Cleaning and
storing" on page 52.
50
• Ensure that the packing foil does not

4.8 Material damage

Caution! To avoid material damage,
please observe the following conditions.
and injure
• The appliance must not be placed on
• Only use implements made from wood
• Surface cleaners (furniture and work

5. Before using for the first time

4. Select a location that is firm, level and
5. Unwind the mains cable completely.
6. Insert the plug into a suitable mains
out of the
7. Leave the appliance switched on for
8. Unplug the mains plug and allow the
become a deadly trap for a child.
Packing foils are not toys.
hot stoves, put in a hot oven or set up in
the vicinity of gas heaters and on-
demand water heaters, as this could
cause damage.
or heat-resistant plastic.
implements may damage the coated
surfaces.
surfaces) may contain ingredients that
could attack and soften the rubber feet.
In this case, place the appliance on a
non-flammable surface.
not flammable. Maintain a distance of
approx. 50 cm from other objects.
socket.
The red indicator light 1 now lights up
and the appliance heats up.
As soon as the operating temperature
has been reached, the green indicator
light 2 lights up.
around 10 – 15 minutes.
appliance to cool down.
Metal