DeWalt DW746 Bedienungsanleitung Seite 31

WOODWORKER'S TABLE SAW DW746/DW746T
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Voltage
Power input
Power output
Blade diameter
Blade bore
Max. blade thickness
Max. blade speed
Ripping capacity at 90° (left/right)
Max. mitre angle (left and right)
Max. bevel angle (left/right)
Max. depth of cut at 0° bevel
Max. depth of cut at 45° bevel
Automatic blade brake time
Environmental temperature
Power factor (cos Ê)
Motor duty class
Motor insulation class
Protection class
Dust extraction:
Required airflow
Pressure drop at connection output
Recommended air velocity
- dry wood
- wet wood
Cross section diameter at connection outlet mm
Weight
Fuses:
Europe 230 V tools
400 V tools
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
19
WALT one of the most
E
en - 1
en - 1
en - 2
en - 3
en - 3
en - 3
en - 3
en - 3
en - 7
en - 8
en - 8
DW746 DW746T
V 230 400
W 2,700 3,700
W 2,000 2,900
mm 250 250
mm 30 30
mm 3.2 3.2
-1
min 3,300 3,300
mm 370/730 370/730
60° 60°
47°/ 2° 47°/2°
mm 79 79
mm 54 54
s < 10.0 < 10.0
°C 5 - 40 5 - 40
0.98 0.91
S6 (40% on/60% off)
F F
IP54 IP54
m 3 /h 720 720
mbar 24 24
m/s 20 20
m/s 28 28
100 100
kg 124 126
16 Amperes, mains
16 Amperes, per phase
EC-Declaration of conformity
DW746
D WALT declares that these Power Tools have been designed in
E
compliance with: 98/37/EEC, 89/336/EEC, EN 1870-1, EN 60204-1,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-11.
DW746T
D WALT declares that these Power Tools have been designed in
E
compliance with: 98/37/EEC, 89/336/EEC, EN 1870-1, EN 60204-1,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according to ISO 7960:1995 Annex A:
L (sound pressure)
pA
L (acoustic power)
WA
* at the operator's ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
The sound levels stated are emission levels; they are not necessarily safe
working levels. Even though the measured values are related to exposure
levels, this information does not allow to determine if additional measures
are required. Factors that can affect the radiated levels are duration of
exposure, the characteristics of the work area and other sound sources,
as well as the number of machines of the same type or other machines in
the work area. The acceptable exposure levels may differ according to the
country of use. This information is only intended to help the user assess
possible risks.
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E N G L I S H
WALT at the address below or
E
DW746
dB(A)* 82
dB(A) 95
Cert. No.
BM 9911798 01
DW746T
82
95
en - 1