Silvercrest SHH 1200 D2 Bedienungs- Und Sicherheitshinweise Seite 20

Make sure that the power cable
Q
is not buckled or got jammed.
Repair of electrical equipment
Q
may only be carried out by ex-
perts who are specially trained
by the manufacturer. Improper
repair can cause considerable
danger for the device users.
FIRE RISK!
Q
Therefore, never place
the device near or under
curtains or other combustible
materials.
Avoid contacting the device
Q
by combustible materials (e.g.
textiles).
Before using the device, check
Q
it for visible damage. If the de-
vice fell down or got damaged,
do not start it.
If the power supply cable of this
Q
device is damaged it should be
replaced by the manufacturer
or by its customer service or a
similarly qualified person, to
avoid danger.
BEWARE OF HOT
Q
SURFACES!
Some parts of the product can
Q
become very hot and cause
burns. Pay particular attention
when children and vulnerable
people are present.
Repair of the device shall only be
Q
done by authorised companies
22 GB/IE
qualified in this field or by the af-
ter-sales service. Improper repair
can cause considerable danger
for the device users. Moreover, it
will void all warranty claims.
Defective components may
Q
only be replaced with original
spare parts. Only if original
spare parts are used, it is en-
sured that the security require-
ments are met.
Protect the device against hu-
Q
midity and penetration of liq-
uids.
When disconnecting, pull the
Q
power cable from the wall sock-
et by the power plug only, do
not jerk out the cable.
Do not use the device in the vi-
Q
cinity of open flames.
In the case of faults or during a
Q
thunderstorm, pull out the con-
nector plug from the wall socket.
Use the device only when the
Q
power cable is completely run
out. Never wind the power ca-
ble around the device. Make
sure that the power cable does
not contact hot surfaces. Route
the cable so that nobody can
stumble over it.