Controls And Functions; Front Panel - Yamaha RX-V800RDS Bedienungsanleitung

Front Panel

1
STANDBY
/ON
SPEAKERS BASS PROCESSOR
A B EXTENSION DIRECT
ON OFF
8 9 0
1
STANDBY/ON
Turns on and sets this unit in the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit consumes a small amount of
power to receive infrared-signals from the remote
control.
2
Remote control sensor
Receives signals from the remote control.
3
Front panel display
Shows information about the operational status of this
unit (see page 9).
4
INPUT MODE
Selects the mode of input for sources that send two or
more types of signals to this unit (see page 26).
You cannot control the input mode when you select 6CH
INPUT as the input source.
5
INPUT l / h
Selects the input source (DVD, D-TV/LD, CBL/SAT,
VCR 1, VCR 2/DVR, V-AUX, PHONO, CD, TUNER,
CD-R, MD/TAPE) you want to listen to or watch.
4

CONTROLS AND FUNCTIONS

2
PRESET/
A/B/C/D/E TUNING
TUNER
EFFECT
PROGRAM
DSP
q w e r
3
INPUT MODE
D I G I T A L
PRESET TUNING RDS MODE
/TUNING FM/AM MEMORY MODE /FREQ EON
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO MODE
L AUDIO R
PHONES S VIDEO VIDEO
SILENT VIDEO AUX
PRESET
/TUNING FM/AM
EDIT MAN'L/AUTO FM
t y
u i o p a s d f
6
VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
7
6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
The source selected by pressing 6CH INPUT takes
priority over the source selected with INPUT l / h (or
the input selector buttons).
8
SPEAKERS A/B
Turn on or off the set of main speakers connected to the A
and/or B terminals on the rear panel.
9
BASS EXTENSION ON/OFF
When pushed in (ON), this feature boosts the bass
frequency of the left and right main channels by +6 dB
(60 Hz) while maintaining overall tonal balance. This
boost is useful if you do not use a subwoofer.
However, this boost may not be noticeable if "1B MAIN
SP" on the SET MENU is set to SMALL and "1D LFE/
BASS OUT" is set to SWFR.
0
PROCESSOR DIRECT ON/OFF
When pushed in (ON), BASS, TREBLE, and BASS
EXTENSION are bypassed, eliminating any alteration of
the original signal.
4 5
INPUT VOLUME
D I G I T A L
SURROUND
PTY SEEK
BASS
START
OPTICAL
+
–
TUNING RDS MODE
MEMORY MODE /FREQ EON PTY SEEK
AUTO/MAN'L MONO MODE START
6
7
6CH INPUT
TREBLE
+
–
g h