Herunterladen Inhalt Inhalt Diese Seite drucken

Normal Stereo Reproduction - Yamaha RX-V800RDS Bedienungsanleitung

Av receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 150
I Dolby Digital Matrix 6.1 or DTS
ES decoder
If you want to use the Dolby Digital Surround EX or DTS
ES software, press 6.1/ES to turn on the Dolby Digital
Matrix 6.1 or DTS ES decoder (see "12 6.1/ES AUTO"
on pages 45 and 60 for details).
Remote control
VIRTUAL
VIRTUAL
DTS
MOVIE THEATER 1
2
PTY HOLD EON STEREO AUTO
DIGITAL
NEWS INFO AFFAIRS SPORT
MEMORY TUNED
PRO LOGIC
DSP
6.1/ES
SP
PCM
A
B
The " c " indicator lights up.
I Virtual CINEMA DSP and SILENT
CINEMA DSP
You can experience the virtual CINEMA DSP sound field
by setting "1C REAR L/R SP" on the SET MENU to
NONE. The sound field processing is changed to the
Virtual CINEMA DSP mode according to the selected
DSP program. Virtual CINEMA DSP is performed by
using the main speakers. You can also listen to SILENT
CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is
on.
Note
• This unit is not set in the virtual CINEMA DSP mode even if
"1C REAR L/R SP" is set to NONE in the following cases:
– when the 5ch Stereo, DOLBY DIGITAL/Normal or DTS/
Normal program is selected;
– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when the Dolby Digital KARAOKE source is played;
– when using the test tone; or
– when connecting the headphones.
PS
PTY
RT
CT
DVD
VOLUME
D-TV/LD
MD/TAPE
ZONE 2
SLEEP
CBL/SAT
CD-R
VCR 1
TUNER
CD
VCR2/DVR
V-AUX
PHONO

Normal Stereo Reproduction

Press EFFECT to turn off the sound effect
for normal stereo reproduction.
Press EFFECT again to turn the sound effect back
on.
EFFECT
Front panel
y
• If the selector dial is set to a position other than the DSP/TUN
position, first press DSP and then EFFECT on the remote
control.
Notes
• If you turn off the sound effect, no sound is output from the
center and rear speakers.
• If you turn off the sound effect while a Dolby Digital or DTS
signal is being output, the dynamic range of the signal is
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the main speakers.
• The volume may be greatly reduced when you turn off the
sound effect or if you set "10B D-RANGE" on the SET MENU
to MIN. In this case turn on the sound effect.
BASIC PLAYBACK
or
Remote control
29

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis