Speaker Mode Settings; Summary Of Speaker Set Items 1A Through 1E - Yamaha RX-V800RDS Bedienungsanleitung

This unit has 5 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your
configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings. If the initial settings are not appropriate for your speaker configuration, change the
settings on the SET MENU (see page 39).

Summary of SPEAKER SET Items 1A through 1E

Item
1A CENTER SP
Selects the center channel output mode according to the size of the center speaker.
The possible settings are LRG (large), SML (small) and NONE.
1B MAIN SP Selects the main channel output mode according to the size of the main speakers.
The possible settings are LARGE and SMALL.
1C REAR L/R SP
Selects the rear channel output mode according to the size of the rear speakers.
The possible settings are LRG (large), SML (small) and NONE.
1D LFE/BASS OUT
Selects a speaker for the LFE signal output and low bass signal.
The possible settings are SWFR (subwoofer), MAIN, and BOTH.
1E MAIN LEVEL Selects the output level for the main channel signal.
The possible settings are Normal and –10 dB.

SPEAKER MODE SETTINGS

Description Initial setting
LRG
LARGE
LRG
BOTH
Normal
21