ASROCK X299 OC Formula Bedienungsanleitung Seite 29

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 31)
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 25)
(SATA3_2_3:
see p.1, No. 26)
(SATA3_4_5:
see p.1, No. 27)
(SATA3_A1_A2:
see p.1, No. 23)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 33)
(9-pin USB5_6)
(see p.1, No. 34)
USB 3.1 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 21)
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+
Dummy
1
X299 OC Formula
Please connect the
chassis power LED and
the chassis speaker to this
header.
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* To minimize the boot
time, use Intel® X299
SATA ports (SATA3_0~5)
for your bootable devices.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_5 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There is one header on
this motherboard. Each
USB 3.1 Gen1 header can
support two ports.
27