Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
Version 1.1
Published October 2020
Copyright©2020 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK X370M Pro4-F

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI®...
  • Seite 3: Motherboard-Layout

    X370M Pro4-F Motherboard Layout...
  • Seite 4 No. Description ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) AMD Fan LED Header (AMD_FAN_LED1) ATX Power Connector (ATXPWR1) USB 3.2 Gen1 Header (USB3_67) AMD LED Fan USB Header (USB_7) SATA3 Connector (SATA3_3) (Upper) SATA3 Connector (SATA3_4) (Lower)
  • Seite 5 X370M Pro4-F I/O Panel No. Description No. Description PS/2 Mouse Port USB 3.2 Gen1 Ports (USB3_23) DVI-D Port USB 3.2 Gen1 Type-C Port (USB3_TC1) LAN RJ-45 Port* HDMI Port Line In (Light Blue) D-Sub Port Front Speaker (Lime) USB 2.0 Ports (USB_1_2)**...
  • Seite 6: Package Contents

    If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 7 * For Ryzen Series CPUs (Picasso and Raven Ridge), ECC is only supported with PRO CPUs. * Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/) * Please refer to page 22 for the table for AMD non-XMP mem- ory frequency support.
  • Seite 8 AMD Ryzen series CPUs (Matisse, Summit Ridge and Pinnacle Expansion Ridge) Slot • 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)* • 1 x PCI Express 2.0 x16 Slot (PCIE3: x4 mode) AMD 7 A-Series APUs • 1 x PCI Express 3.0 x16 Slot (PCIE2: x8 mode)* • 1 x PCI Express 2.0 x16 Slot (PCIE3: x4 mode) AMD Ryzen series CPUs (Picasso, Raven Ridge) • 1 x PCI Express 3.0 x16 Slot (PCIE2: x8 mode)*...
  • Seite 9 Pinnacle Ridge) or Gen3 x2 (16 Gb/s) (with A-Series APU and Athlon series APU)** ** Supports NVMe SSD as boot disks ** Supports ASRock U.2 Kit • 1 x M.2 Socket (M2_2), supports M Key type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module...
  • Seite 10: Hardware Monitor

    Connector • 1 x COM Port Header • 1 x TPM Header • 1 x Power LED and Speaker Header • 1 x RGB LED Header * Supports in total up to 12V/3A, 36W LED Strip • 1 x Addressable LED Header * Supports in total up to 5V/3A, 15W LED Strip • 1 x AMD Fan LED Header * The AMD Fan LED Header supports LED strips of maximum...
  • Seite 11 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjust- ing the setting in the BIOS, applying Untied Overclocking Technology, or using third- party overclocking tools.
  • Seite 12 Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Seite 13: Installing The Cpu

    X370M Pro4-F 2.1 Installing the CPU Unplug all power cables before installing the CPU.
  • Seite 15 X370M Pro4-F 2.2 Installing the CPU Fan and Heatsink After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
  • Seite 17 X370M Pro4-F Installing the AM4 Box Cooler SR2...
  • Seite 19 X370M Pro4-F 4-pin FAN cable RGB LED Cable +12V *The diagram shown here are for reference only. Please refer to page 32 for the orientation of AMD Fan LED Header (AMD_FAN_LED1).
  • Seite 20 Installing the AM4 Box Cooler SR3...
  • Seite 21 X370M Pro4-F...
  • Seite 22 4-pin FAN cable...
  • Seite 23 +12V Please note that only one cable should be used at a time in this step. If you select AMD_FAN_LED1, please install ASRock utility "ASRock Polychrome RGB". If you select USB connector, please install AMD utility "SR3 Settings Software". *The diagram shown here are for reference only. Please refer to page 32 for the orientation of AMD Fan...
  • Seite 24 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Seite 25 X370M Pro4-F Ryzen Series CPUs (Pinnacle Ridge): UDIMM Memory Slot Frequency (Mhz) 2933 2933 2933 2933 2933 SR/DR SR/DR 2667 SR/DR SR/DR SR/DR SR/DR 2133-2400 Ryzen Series CPUs (Picasso): UDIMM Memory Slot Frequency (Mhz) 2933 2667 2667 2400 2133 SR/DR...
  • Seite 26 Ryzen Series CPUs (Summit Ridge): UDIMM Memory Slot Frequency (Mhz) 2667 2667 2667 2667 2667 SR/DR SR/DR 2667 SR/DR SR/DR SR/DR SR/DR 2133-2400 Ryzen Series CPUs (Raven Ridge): UDIMM Memory Slot Frequency (Mhz) 2933 2667 2667 2667 2667 SR/DR SR/DR 2667 SR/DR SR/DR...
  • Seite 27 X370M Pro4-F The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Seite 28 2.4 Expansion Slots (PCI Express Slots) There are 3 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Seite 29 X370M Pro4-F 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper...
  • Seite 30 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Seite 31 X370M Pro4-F Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 14) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These four SATA3 (SATA3_1: connectors support SATA see p.1, No.
  • Seite 32 USB 3.2 Gen1 Header There is one header on Vbus Vbus Vbus IntA_PB_SSRX- (19-pin USB3_67) this motherboard. Each IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (see p.1, No. 7) USB 3.2 Gen1 header can IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ support two ports. IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Front Panel Audio Header...
  • Seite 33 X370M Pro4-F CPU Fan Connector This motherboard pro- FAN_SPEED FAN_VOLTAGE_CONTROL (4-pin CPU_FAN1) vides a 4-Pin CPU fan FAN_SPEED_CONTROL (see p.1, No. 2) (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.
  • Seite 34 RGB LED Header RGB LED header is used to con- (4-pin RGB_HEADER1) nect RGB LED extension cable 12V G R (see p.1, No. 21) which allows users to choose from various LED lighting ef- fects. Caution: Never install the RGB LED cable in the wrong orienta- tion;...
  • Seite 35 X370M Pro4-F 2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports type 2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s) (with Matisse, Picasso, Summit Ridge, Raven Ridge and Pinnacle Ridge) or Gen3 x2 (with A-Series APU and Athlon series APU).
  • Seite 36 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Seite 37 X370M Pro4-F Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. NUT2 NUT1 M.2_SSD (NGFF) Module Support List Vendor Interface Intel PCIe INTEL 6000P-SSDPEKKF256G7 (nvme)
  • Seite 38 2.8 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (M2_2) supports type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module. * M2_2 and SATA3_3 share lanes.
  • Seite 39 X370M Pro4-F Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut.
  • Seite 40 SATA Transcend TS256GMTS800-256GB Transcend SATA Transcend TS64GMTS400-64GB V-Color SATA V-Color 120G V-Color SATA V-Color 240G SATA WD BLUE WDS100T1B0B-00AS40 SATA WD GREEN WDS240G1G0B-00RC30 For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 41 X370M Pro4-F 2.9 ASRock RGB LED ASRock RGB LED is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Seite 42 Connecting the Addressable RGB LED Strip Connect your Addressable RGB LED strip to the Addressable LED Header (ADDR_LED1) on the motherboard. ADDR_LED1 DO_ADDR VOUT 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged. 2.
  • Seite 43 ASRock RGB LED Utility Now you can adjust the RGB LED color through the ASRock RGB LED utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Seite 44: Einleitung

    1 Einleitung Vielen Dank, dass Sie sich für das X370M Pro4-F von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 45: Technische Daten

    * Für Prozessoren der Ryzen-Serie (Picasso und Raven Ridge), ECC wird nur mit PRO-Prozessoren unterstützt. * Weitere Informationen finden Sie in der Speicherkompatibilität- sliste auf der ASRock-Webseite. (http://www.asrock.com/) * Die Tabelle für AMDs Non-XMP-Speicherfrequenzen finden Sie auf Seite 22. Weitere Einzelheiten finden Sie in der QVL auf ASRocks Webseite.
  • Seite 46 CPUs der AMD-Ryzen-Serie (Matisse, Summit Ridge und Erweiter- Pinnacle Ridge) ungssteck- platz • 1 x PCI-Express 3.0-x16-Steckplatz (PCIE2:x16-Modus)* • 1 x PCI-Express 2.0-x16-Steckplatz (PCIE3:x4-Modus) APUs von AMDs A-Serie der 7. Generation • 1 x PCI-Express 3.0-x16-Steckplatz (PCIE2:x8-Modus)* • 1 x PCI-Express 2.0-x16-Steckplatz (PCIE3:x4-Modus) CPUs der AMD-Ryzen-Serie (Picasso, Raven Ridge) • 1 x PCI-Express 3.0-x16-Steckplatz (PCIE2:x8-Modus)* • 1 x PCI-Express 2.0-x16-Steckplatz (PCIE3:x4-Modus)
  • Seite 47 (32 Gb/s) (mit Matisse, Picasso, Summit Ridge, Raven Ridge und Pinnacle Ridge) oder Gen3 x2 (16 Gb/s) (mit APU der A-Serie und Athlon-APU)** ** Unterstützt NVMe-SSD als Bootplatte ** Unterstützt ASRock U.2-Kit • 1 x M.2-Sockel (M2_2), unterstützt M-Key- 2230/2242/2260/2280-M.2-SATA-III-6,0-Gb/s-Modul...
  • Seite 48: Anschluss

    Anschluss • 1 x COM-Anschluss-Stiftleiste • 1 x TPM-Stiftleiste • 1 x Betrieb-LED- und Lautsprecher-Stiftleiste • 1 x RGB-LED-Stiftleiste * Unterstützt insgesamt bis zu 12 V/3 A, 36-W-LED-Streifen • 1 x Adressierbare-LED-Stiftleiste * Unterstützt insgesamt bis zu 5 V/3 A, 15-W-LED-Streifen • 1 x AMD-Lüfter-LED-Stiftleiste * Die LED-Stiftleiste des AMD-Lüfters unterstützt LED-Streifen mit einer maximalen Last von 3 A (36 W) und einer Länge von bis...
  • Seite 49 • FCC, CE • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Seite 50: Jumpereinstellung

    1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. CMOS-löschen-Jumper Kurzgeschlossen: CMOS (CLRCMOS1) löschen 2-poliger Jumper (siehe S.
  • Seite 51: Integrierte Stiftleisten Und Anschlüsse

    X370M Pro4-F 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper- Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen.
  • Seite 52 Betrieb-LED- und Bitte verbinden Sie die Betrieb- SPEAKER DUMMY Lautsprecher-Stiftleiste LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 14) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese vier SATA-III-Anschlüsse (SATA3_1: unterstützen SATA-Datenkabel siehe S. 1, Nr. 12) (obere) für interne Speichergeräte mit (SATA3_2: einer Datenübertragungsgeschwi...
  • Seite 53 X370M Pro4-F USB 3.2 Gen1-Stiftleiste Es gibt eine Stiftleiste an diesem Vbus Vbus Vbus IntA_PB_SSRX- (19-polig, USB3_67) Motherboard. Jede USB 3.2 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (siehe S. 1, Nr. 7) Gen1-Stiftleiste kann zwei Ports IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ unterstützen. IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D-...
  • Seite 54 CPU-Lüfteranschluss Dieses Motherboard bietet einen FAN_SPEED FAN_VOLTAGE_CONTROL (4-polig, CPU_FAN1) 4-poligen CPU-Lüfteranschluss FAN_SPEED_CONTROL (siehe S. 1, Nr. 2) (lautloser Lüfter). Falls Sie einen 3-poligen CPU-Lüfter anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3. ATX-Netzanschluss Dieses Motherboard bietet (24-polig, ATXPWR1) einen 24-poligen ATX-Netzan- (siehe S.
  • Seite 55 X370M Pro4-F RGB-LED-Stiftleiste RGB-LED-Stiftleiste dient dem (4-polig, Anschließen eines RGB-LED- 12V G R RGB_HEADER1) Erweiterungskabels, das dem (siehe S.1, Nr. 21) Nutzer die Auswahl zwischen verschiedenen LED-Lichteffekten ermöglicht. Achtung: Installieren Sie das RGB-LED-Kabel niemals falsch herum; andernfalls könnte das Kabel beschädigt werden.
  • Seite 56: Contenu De L'emballage

    à modification sans préavis. En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notifica- tion préalable. Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez.
  • Seite 57 PRO. * Veuillez consulter la liste de prise en charge des mémoires sur le site Web d'ASRock pour de plus amples informations. (http://www.asrock.com/) * Veuillez consulter la page 22 pour la table de prise en charge de la fréquence de la mémoire AMD non XMP.
  • Seite 58 Processeurs AMD série Ryzen (Matisse, Summit Ridge et Fente d’expansion Pinnacle Ridge) • 1 x fente PCI Express 3.0 x 16 (PCIE2 :mode x16)* • 1 x fente PCI Express 2.0 x 16 (PCIE3 :mode x4) APU AMD série A de 7 ème génération • 1 x fente PCI Express 3.0 x 16 (PCIE2 :mode x8)*...
  • Seite 59 (32 Go/s) (avec Matisse, Picasso, Summit Ridge, Raven Ridge et Pinnacle Ridge) ou Gen3 x2 (16 Go/s) (avec APU série A et APU Athlon)** ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2...
  • Seite 60 • 1 x socket M.2 (M2_2), prend en charge les modules M.2 SATA3 6,0 Gb/s type 2230/2242/2260/2280 touche M Connecteur • 1 x embase pour port COM • 1 x embase TPM • 1 x prise DEL d’alimentation et haut-parleur • 1 x embase LED RVB * Prend en charge les rubans LED jusqu'à...
  • Seite 61 • FCC, CE • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o verclocking présente certains risques, incluant des modi- fications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’...
  • Seite 62 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court-circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ». Cavalier Clear CMOS Court-circuité : Fonction (CLRCMOS1)
  • Seite 63 X370M Pro4-F 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Seite 64 Prise DEL d’alimentation Veuillez brancher la DEL SPEAKER DUMMY et haut-parleur d'alimentation du châssis et le DUMMY (SPK_PLED1 à 7 broches) haut-parleur du châssis sur ce (voir p.1, No. 14) connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces quatre connecteurs SATA3 (SATA3_1: sont compatibles avec les câbles voir p.1, No.
  • Seite 65 X370M Pro4-F Embase USB 3.2 Gen1 Cette carte mère comprend un Vbus Vbus Vbus IntA_PB_SSRX- (USB3_67 à 19 broches) connecteur. Chaque embase USB IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (voir p.1, No. 7) 3.2 Gen1 peut prendre en charge IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ deux ports.
  • Seite 66 Connecteur du Cette carte mère est dotée d’un FAN_SPEED ventilateur du connecteur pour ventilateur FAN_VOLTAGE_CONTROL FAN_SPEED_CONTROL processeur de processeur (Quiet Fan) à 4 (CPU_FAN1 à broches. Si vous envisagez de 4 broches) connecter un ventilateur de (voir p.1, No. 2) processeur à...
  • Seite 67 X370M Pro4-F Embase LED RVB L'embase LED RVB sert à con- (RGB_HEADER1 necter le câble d'extension LED 12V G R à 4 broches) RVB qui permet aux utilisateurs (voir p.1, No. 21) de choisir parmi plusieurs effets lumineux LED. Attention : N'installez jamais le câble LED RVB dans le mauvais...
  • Seite 68: Contenuto Della Confezione

    Nel caso di eventuali modifiche del presente manuale, la versione aggiornata sarà disponibile sul sito Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in uso.
  • Seite 69 ECC senza CPU PRO. * Per maggiori informazioni fare riferimento all'elenco dei supporti di memoria sul sito di ASRock. (http://www.asrock.com/) * Fare riferimento a pagina 22 per la tabella delle frequenze di memoria AMD non-XMP supportate. Per altri dettagli, fare riferi- mento a QVL sul sito ASRock.
  • Seite 70 CPU serie AMD Ryzen (Matisse, Summit Ridge e Pinnacle Alloggio d’espansione Ridge) • 1 x Alloggio PCI Express 3.0 x16 (PCIE2:modalità x16)* • 1 x Alloggio PCI Express 2.0 x16 (PCIE3:modalità x4) APU serie AMD 7 • 1 x Alloggio PCI Express 3.0 x16 (PCIE2:modalità x8)* • 1 x Alloggio PCI Express 2.0 x16 (PCIE3:modalità...
  • Seite 71 Ridge) o Gen3 x2 (16 Gb/s) (con APU serie A e APU Anth- lon)** ** Supporto di SSD NVMe come disco d’avvio ** Supporta kit ASRock U.2 • 1 x M.2 Socket (M2_2), supporto modulo M.2 SATA3 6,0 Gb/s tipo 2230/2242/2260/2280...
  • Seite 72 Connettore • 1 x connettore porta COM • 1 x connettore TPM • 1 x connettore LED alimentazione e altoparlante • 1 x collettore LED RGB * Supporto totale di fino a 12V/3A, 36W strip LED • 1 x Header LED indirizzabile * Supporto totale di fino a 5V/3A, 15W strip LED • 1 x Collettore LED ventola AMD * Il collettore LED ventola AMD supporta strisce LED con un...
  • Seite 73 • FCC, CE • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclock- ing o l'utilizzo di strumenti di overclocking di terze parti.
  • Seite 74 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". Jumper per azzerare la CMOS Cortocircuitato: Azzerare (CLRCMOS1) la CMOS...
  • Seite 75 X370M Pro4-F 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Seite 76 Connettore LED Collegare i LED alimentazione SPEAKER DUMMY alimentazione e e l’altoparlante a questo connet- l’altoparlante a questo connet- a questo connet- DUMMY altoparlante tore. (SPK_PLED1 a 7 pin) (vedere pag. 1, n. 14) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi quattro connettori SATA3 (SATA3_1: supportano cavi dati SATA...
  • Seite 77 X370M Pro4-F Header USB 3.2 Gen1 Su questa scheda madre c’ è un Vbus Vbus Vbus IntA_PB_SSRX- (USB3_67 a 19 pin) connettore. Ciascun header USB IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (vedere pag. 1, n. 7) 3.2 Gen1 può supportare due IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ porte.
  • Seite 78 Connettore ventola Questa scheda madre è dotata FAN_SPEED FAN_VOLTAGE_CONTROL di un connettore per la ventola FAN_SPEED_CONTROL (CPU_FAN1 a 4 pin) della CPU (Ventola silenziosa) (vedere pag. 1, n. 2) a 4 pin. Se si decide di collegare una ventola della CPU a 3 pin, collegarla al pin 1-3.
  • Seite 79 X370M Pro4-F Collettore LED RGB Il collettore LED RGB viene utiliz- (RGB_HEADER1 a 4 pin) zato per collegare la prolunga LED 12V G R (vedere pag. 1, n. 21) RGB, che consente agli utenti di scegliere tra vari effetti di illumi- nazione a LED.
  • Seite 80: Contenido Del Paquete

    1 Introducción Gracias por comprar la placa base ASRock X370M Pro4-F, una placa base fiable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock.
  • Seite 81 * Consulte la página 22 para acceder a la tabla de compatibilidad de frecuencias de memoria no XMP de AMD. Para obtener más información, consulte la QVL en el sitio web de ASRock. • Capacidad máxima de memoria del sistema: 64GB...
  • Seite 82 Ranura de CPU de la serie AMD Ryzen (Matisse, Summit Ridge y Pinnacle Ridge) expansión • 1 ranura PCI Express 3.0 x16 (PCIE2:modo x16)* • 1 ranura PCI Express 2.0 x16 (PCIE3:modo x4) APU de la serie A AMD 7 • 1 ranura PCI Express 3.0 x16 (PCIE2:modo x8)* • 1 ranura PCI Express 2.0 x16 (PCIE3:modo x4) CPU de la serie AMD Ryzen (Picasso, Raven Ridge)
  • Seite 83 Gen3 x2 (16 Gb/s) (con APU de la serie A y APU Athlon)** ** Admite unidad de estado sólido de NVMe como disco de ar- ranque ** Admite el kit U.2 de ASRock • 1 x Zócalo M.2 (M2_2), admite el módulo SATA3 6,0 Gb/s M.2 de tipo 2230/2242/2260/2280 con clave M...
  • Seite 84 Conector • 1 x Base de conexiones de puerto COM • 1 x Conector TPM • 1 x LED de alimentación y base de conexiones para el altavoz • 1 x Cabezal de indicador LED RGB * Admite una tira de LED de hasta 12 V/3 A (36 W) en total • 1 x Base de conexiones de LED direccionable * Admite una tira de LED de hasta 5 V/3 A (15 W) en total • 1 x Base de conexiones de LED de ventilador AMD...
  • Seite 85 • Preparado para ErP/EuP (se necesita una fuente de aliment- ación preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web: http://www.asrock.com Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando...
  • Seite 86 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”. Puente de borrado de CMOS Corto: Borrado de CMOS (CLRCMOS1)
  • Seite 87 X370M Pro4-F 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Seite 88 LED de alimentación y Conecte el LED de aliment- SPEAKER DUMMY base de conexiones para la ación del chasis y el altavoz del DUMMY altavoz chasis a esta base de conex- a esta base de conex- (SPK_PLED1 de 7 iones. contactos) PLED+ (consulte la pág.
  • Seite 89 X370M Pro4-F Cabezal USB 3.2 Gen1 Esta placa base tiene otra base de Vbus Vbus Vbus IntA_PB_SSRX- (USB3_67 conexiones. Cada cabezal USB 3.2 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ de 19 contactos) Gen1 admite dos puertos. IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ (consulte la pág. 1, nº 7)
  • Seite 90 Conector del Esta placa base contiene un FAN_SPEED FAN_VOLTAGE_CONTROL ventilador de la CPU conector de ventilador (venti- FAN_SPEED_CONTROL (CPU_FAN1 de 4 lador silencioso) de CPU de 4 contactos) contactos. Si tiene pensando (consulte la pág.1, N.º 2) conectar un ventilador de CPU de 3 contactos, conéctelo al contacto 1-3.
  • Seite 91 X370M Pro4-F Cabezal de LED RGB La base de conexiones de LED (RGB_HEADER1 RGB se utiliza para conectar 12V G R de 4 contactos) el alargador de LED RGB que (consulte la pág. 1, nº 21) permite a los usuarios elegir entre varios efectos de iluminación de...
  • Seite 92: Комплект Поставки

    уведомления. При необходимости технической поддержки, связанной с материнской платой, посетите веб-сайт и найдите на нем информацию о модели используемой вами материнской платы. На веб-сайте ASRock также можно найти самый последний перечень поддерживаемых VGA-карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки...
  • Seite 93: Технические Характеристики

    X370M Pro4-F 1.2 Технические характеристики • Форм-фактор Micro ATX Платформа • Схема на основе твердотельных конденсаторов ЦП • Поддерживаются процессоры AMD APU серии A (Bristol Ridge) и ЦП серии Ryzen (Matisse, Picasso, Summit Ridge, Raven Ridge и Pinnacle Ridge) под сокет AM4 • Digi Power design...
  • Seite 94 ЦП серии AMD Ryzen (Matisse, Summit Ridge и Pinnacle Слоты Ridge) расширения • 1 слот PCI Express 3.0 x16 (PCIE2:режим x16)* • 1 cлот PCI Express 2.0 x16 (PCIE3:режим x4) Гибридные процессоры AMD 7го поколения серии А • 1 слот PCI Express 3.0 x16 (PCIE2:режим x8)* • 1 cлот...
  • Seite 95 Ridge) с ключом М или Gen3 x2 (16 Гбит/с) (с процессоры серии А и Athlon APU).** ** Поддерживаются в качестве загрузочных SSD-диски типа NVMe (только M2_1) ** Поддерживается комплект ASRock U.2. • 1 слот M.2 (M2_2), поддерживает модуль M.2 SATA3 с ключом М типа 2230/2242/2260/2280 со скоростью передачи данных 6,0 Гбит/с...
  • Seite 96 Разъемы • 1 колодка СОМ-порта • 1 колодка ТРМ • 1 колодка светодиодного индикатора питания и корпусного динамика • 1 колодка светодиодной RGB-подсветки * Поддерживается светодиодная лента (максимум 12 В/3 А, суммарной мощностью до 36 Вт). • 1 колодка адресуемой светодиодной подсветки * Поддерживается светодиодная лента (максимум 5 В/3 А, суммарной...
  • Seite 97 • FCC, CE • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте: http://www.asrock.com Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов...
  • Seite 98 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». Перемычка сброса Замкнута: Сброс настроек CMOS настроек CMOS Разомкнута: По умолчанию 2-контактная (CLRCMOS1) перемычка (см. стр. 1, № 18) CLRCMOS1 используется...
  • Seite 99 X370M Pro4-F 1.4 Колодки и разъемы, расположенные на системной плате Расположенные на системной плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое повреждение системной платы.
  • Seite 100 Колодка светодиодного Предназначена для SPEAKER DUMMY индикатора питания и подключения светодиодного DUMMY динамика корпуса индикатора питания и (7-контактная, динамика корпуса. SPK_PLED1) PLED+ (см. стр. 1, № 14) PLED+ PLED- Разъемы Serial ATA3 Эти четыре разъема (SATA3_1: SATA3 предназначены для см. стр. 1, № 12) подключения...
  • Seite 101 X370M Pro4-F Колодки USB 3.2 Gen1 На материнской плате имеется Vbus Vbus Vbus IntA_PB_SSRX- (19-контактная, одна колодка. Каждая колодка IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ USB3_67) USB 3.2 Gen1 поддерживает два IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ (см. стр. 1, № 7) порта. IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D-...
  • Seite 102 Разъем Эта материнская плата снабжена FAN_SPEED вентилятора 4-контактным разъемом для FAN_VOLTAGE_CONTROL FAN_SPEED_CONTROL охлаждения малошумящего вентилятора процессора ЦП. Если вы собираетесь (4-контакта, CPU_FAN1) подключить 3-контактный (см. стр. 1, № 2) вентилятор охлаждения процессора, подключайте его к контактам 1-3. Разъем питания АТХ Эта материнская плата (24-контакта, оснащена...
  • Seite 103 X370M Pro4-F Колодка светодиодной Колодка светодиодной RGB-подсветки RGB-подсветки служит для 12V G R (4-контактная, подключения удлинительного RGB_HEADER1) кабеля светодиодной RGB- (См. стр.1, № 21) подсветки, которая позволяет реализовать различные световые эффекты. Внимание! Категорически запрещается подключать кабель светодиодной RGB- подсветки с нарушением...
  • Seite 104 Колодка для Колодка для подключения подключения светодиодной подсветки 12V G R светодиодной подсветки вентилятора AMD служит для вентилятора AMD. подключения удлинительного (4-контактная, кабеля светодиодной AMD_FAN_LED1) RGB-подсветки, который (См. стр.1, № 5) поставляется с кулером AMD. Подключив этот кабель, можно различные световые эффекты. Внимание! Категорически...
  • Seite 105: Conteúdo Da Embalagem

    X370M Pro4-F 1 Introdução Obrigado por adquirir a placa mãe ASRock X370M Pro4-F, uma confiável placa mãe ASRock produzida sob rigoroso controle de qualidade consistente. Esta placa principal oferece um excelente desempenho com um design robusto em conformidade com o compromisso da ASRock em fabricar produtos de qualidade e resistentes.
  • Seite 106: Especificações

    * Por favor, consulte a página 22 para a tabela para suporte de frequência de memória AMD não XMP. Para mais detalhes, con- sulte o QVL no website da ASRock. • Capacidade máxima da memória do sistema: 64GB • Contato em Ouro 15μ nos slots DIMM...
  • Seite 107 X370M Pro4-F CPUs AMD Série Ryzen (Matisse, Summit Ridge e Pinnacle Slot de ex- pansão Ridge) • 1 x Slot PCI Express 3.0 x16 (PCIE2:modo x16)* • 1 x Slot PCI Express 2.0 x16 (PCIE3:modo x4) APUs AMD 7ª Série A • 1 x Slot PCI Express 3.0 x16 (PCIE2:modo x8)*...
  • Seite 108 Ridge) ur Gen3 x2 (16 Gb/s) (com APU Série-A e Athlon APU)** ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 • 1 x Soquete M.2 (M2_2), suporta módulo Chave tipo 2230/2242/2260/2280 M.2 SATA3 6,0 Gb/s...
  • Seite 109 X370M Pro4-F Conector • 1 x Suporte porta COM • 1 x Plataforma TPM • 1 x LED de alimentação e Cabeçote de Autofalante • 1 x Cabeçote de LED RGB * Suporta no total até 12V/3A, Tira de LED de 36W • 1 x Plataforma de LED Ajustável...
  • Seite 110 • Preparada para ErP/EuP (é necessária uma fonte de alimen- tação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização...
  • Seite 111 X370M Pro4-F 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto".
  • Seite 112 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe. Suporte do painel de Ligue o botão de alimentação, PLED+ PLED-...
  • Seite 113 X370M Pro4-F LED de alimentação e Conecte o LED de alimentação SPEAKER DUMMY Cabeçote de Autofalante do chassi e o autofalante do DUMMY (SPK_PLED1 de 7 pinos) chassi a este cabeçote. (ver p.1, N.º 14) PLED+ PLED+ PLED- Conectores série ATA3...
  • Seite 114 Plataforma USB 3.2 Gen1 Há um cabeçote nesta placa-mãe. Vbus Vbus Vbus IntA_PB_SSRX- (USB3_67 de 19 pinos) Cada suporte USB 3.2 Gen1 pode IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (ver p.1, N.º 7) suportar duas portas. IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Suporte de áudio do painel...
  • Seite 115 X370M Pro4-F Conector da Esta placa mãe inclui um conec- FAN_SPEED FAN_VOLTAGE_CONTROL Ventoinha da CPU tor de ventilador da CPU (Venti- FAN_SPEED_CONTROL (CPU_FAN1 lador silencioso) de 4 pinos. de 4 pinos) Se você pretende conectar um (ver p.1, N.º 2) ventilador da CPU de 3 pinos, por favor, conecte-o ao Pino 1-3.
  • Seite 116 Cabeçote de LED RGB Cabeçote RGB LED é usado para (RGB_HEADER1 de 4 conectar o cabo de extensão 12V G R pinos) de LED RGB que permite aos (ver p.1, N.º 21) usuários escolher entre vários efei- tos de iluminação LED. Atenção: Nunca instale o cabo RGB LED na orientação errada;...
  • Seite 117: Zawartość Opakowania

    Na stronie internetowej ASRock, można także pobrać listę najnowszych kart VGA i obsługiwanych CPU. Strona internetowa ASRock http://www.asrock.com. 1.1 Zawartość opakowania • Płyta główna ASRock X370M Pro4-F (Współczynnik kształtu Micro ATX)
  • Seite 118 ASRock w celu uzyskania dalszych informacji. (http://www.asrock.com/) * Patrz tabela obsługi częstotliwości dla pamięci non-XMP AMD znajdująca się na stronie 22. Dodatkowe informacje można znaleźć w QVL na portalu internetowym ASRock. • Maks. wielkość pamięci systemowej: 64GB • 15μ pozłacane styki w gniazdach DIMM...
  • Seite 119 X370M Pro4-F Procesor serii AMD Ryzen (Matisse, Summit Ridge oraz Gniazdo rozsz- Pinnacle Ridge) erzenia • 1 x gniazdo PCI Express 3.0 x 16 (tryb PCIE2:x16)* • 1 x gniazdo PCI Express 2.0 x16 (tryb PCIE3:x4) Seria APU A AMD 7-ej generacji • 1 x gniazdo PCI Express 3.0 x 16 (tryb PCIE2:x8)*...
  • Seite 120 Pinnacle Ridge) lub Gen3 x2 (16 Gb/s) (z APU serii A i Ath- lon APU)** ** Obsługa SSD NVMe, jako dysków rozruchowych ** Obsługa ASRock U.2 Kit • 1 x gniazdo M.2 (M2_2), obsługa Key M typu 2230/2242/2260/2280 modułu M.2 SATA3 6,0 Gb/s...
  • Seite 121 X370M Pro4-F Złącze • 1 x złącze główkowe portu COM • 1 x złącze główkowe TPM • 1 x dioda LED zasilania i złącze główkowe głośnika • 1 x złącze główkowe LED RGB * Obsługa łącznie do 12V/3A, pasek LED 36W • 1 x Adresowalne złącze główkowe LED...
  • Seite 122 • Gotowość do obsługi ErP/EuP (Wymagane zasilanie z gotowością obsługi ErP/EuP) * Dla uzyskania szczegółowej informacji o produkcie, należy odwiedzić naszą stronę internetową: http://www.asrock.com Należy pamiętać, że przetaktowywanie jest związane z pewnym ryzykiem, włącznie z regulacją ustawień w BIOS, zastosowaniem Untied Overclocking Technology lub używaniem narzędzi przetaktowywania innych firm.
  • Seite 123 X370M Pro4-F 1.3 Ustawienia zworek Ta ilustracja pokazuje ustawienia zworek. Po umieszczeniu nasadki zworki na pinach, zworka jest “Zwarta”. Jeśli nasadka zworki nie jest umieszczona na pinach, zworka jest “Otwarta”. Zworka usuwania danych Zwarcie: Usunięcie danych z pamięci CMOS z pamięci CMOS...
  • Seite 124 1.4 Wbudowane złącza główkowe i inne złącza Wbudowane złącza główkowe i inne złącza są bezzworkowe. NIE należy umieszczać zworek nad tymi złączami główkowymi i złączami. Umieszczanie zworek nad złączami główkowymi i złączami spowoduje trwałe uszkodzenie płyty głównej. Złącze główkowe na Podłącz do tego złącza PLED+ PLED-...
  • Seite 125 X370M Pro4-F Dioda LED zasilania i Podłącz to tego złącza SPEAKER DUMMY złącze główkowe głośnika główkowego diodę LED DUMMY (7-pinowe SPK_PLED1) zasilania obudowy i głośnik (sprawdź s.1, Nr 14) obudowy . PLED+ PLED+ PLED- Złącza Serial ATA3 Te cztery złącza SATA3 (SATA3_1: obsługują...
  • Seite 126 Złącza główkowe USB 3.2 Na tej płycie głównej znajduje się Vbus Vbus Vbus IntA_PB_SSRX- Gen1 jedno złącze główkowe. Każde IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (19-pinowe USB3_67) złącze główkowe USB 3.2 Gen1 IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ (sprawdź s.1, Nr 7) może obsługiwać dwa porty. IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D-...
  • Seite 127 X370M Pro4-F Złącze wentylatora Ta płyta główna udostępnia FAN_SPEED FAN_VOLTAGE_CONTROL 4-pinowe złącze wentylatora CPU FAN_SPEED_CONTROL (4-pinowe (Cichy wentylator). Jeśli planow- CPU_FAN1) ane jest podłączenie 3-pinowego (sprawdź s.1, Nr 2) wentylatora CPU, należy je podłączyć do pinów 1-3. Złącze zasilania ATX Ta płyta główna udostępnia...
  • Seite 128 Złącze główkowe LED Złącze główkowe RGB LED jest używane do podłączenia 12V G R (4-pinowe przedłużacza LED RGB, który RGB_HEADER1) umożliwia użytkownikom wybór (sprawdź s.1, Nr 21) spośród różnych efektów światła LED. Ostrzeżenie: Nigdy nie należy instalować kabla LED RGB w nieprawidłowym kierunku;...
  • Seite 129 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 설명서의 내용은 예고 없이 변경될 수 있습니다 . 이 설명서가 변경될 경우 , 업데이트된 버 전은 ASRock 의 웹사이트에서 추가 통지 없이 제공됩니다 . 이 마더보드와 관련하 여 기술적 지원이 필요한 경우 , 당사의 웹사이트를 방문하여 사용 중인 모델에 대...
  • Seite 130 * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목록을 참조하십시오 . (http://www.asrock.com/) * AMD 비 -XMP 메모리 주파수 지원에 대한 표는 22 페이지를 참조하고 , 더 자세한 내용은 ASRock 웹사이트의 QVL 을 참조 하십시오 . • 시스템 메모리 최대 용량 : 64GB...
  • Seite 131 X370M Pro4-F AMD Ryzen 시리즈 CPU(Matisse, Summit Ridge 및 Pinnacle 확장 슬롯 Ridge) • PCI Express 3.0 x16 슬롯 1 개 (PCIE2:x16 모드 )* • PCI Express 2.0 x16 슬롯 1 개 (PCIE3:x4 모드 ) AMD 7 A- 시리즈 APU •...
  • Seite 132 Gen3(16 Gb/s) 최대 2 개 (A 시리즈 APU 및 Athlon APU 의 경우 ) 지원 ** ** NVMe SSD 를 부팅 디스크로 사용 가능하도록 지원 ** ASRock U.2 키트 지원 • M.2 소켓 1 개 (M2_2), M 키 타입 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s 모듈 지원...
  • Seite 133 X370M Pro4-F • COM 포트 헤더 1 개 커넥터 • TPM 헤더 1 개 • 전원 LED 및 스피커 헤더 1 개 • RGB LED 헤더 1 개 * 전체 최대 12V/3A, 36W LED 스트립 지원 • 주소 지정 가능한 LED 헤더 1 개...
  • Seite 134 • FCC, CE 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오버클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이...
  • Seite 135 X370M Pro4-F 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . Clear CMOS 점퍼 단락 : Clear CMOS (CLRCMOS1) 단선 : 기본값 2 핀 점퍼...
  • Seite 136 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마 십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 섀시의 전원 스위치 , 리셋 스 시스템 패널 헤더 PLED+ PLED- (9 핀...
  • Seite 137 X370M Pro4-F 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 스피 SPEAKER DUMMY (7 핀 SPK_PLED1) 커를 이 헤더에 연결하십시 DUMMY (1 페이지 , 14 번 항목 참조 ) 오 . PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 네 개의 SATA3 커넥터는...
  • Seite 138 USB 3.2 Gen1 헤더 이 마더보드에는 하나의 헤더 Vbus Vbus Vbus IntA_PB_SSRX- (19 핀 USB3_67) 가 있습니다 . 각 USB 3.2 Gen1 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (1 페이지 , 7 번 항목 참조 ) 헤더는 포트 두 개를 지원할 수 IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ 있습니다...
  • Seite 139 X370M Pro4-F CPU 팬 커넥터 이 마더보드에는 4 핀 CPU 팬 FAN_SPEED FAN_VOLTAGE_CONTROL (4 핀 CPU_FAN1) ( 저소음 팬 ) 커넥터가 탑재되 FAN_SPEED_CONTROL (1 페이지 , 어 있습니다 . 3 핀 CPU 팬을 2 번 항목 참조 ) 연결하려는 경우 핀 1-3 에 연...
  • Seite 140 RGB LED 헤더 RGB LED 헤더는 다양한 LED 조 (4 핀 RGB_HEADER1) 명 효과를 선택할 수 있는 RGB 12V G R (1 페이지 , 21 번 항목 참조 ) LED 연장 케이블을 연결하는 데 사용됩니다 . 주의 : RGB LED 케이블을 잘못 된...
  • Seite 141 アルの内容は予告なしに変更するこ とがあります。 このマニュアルの内容に変更が あった場合には、 更新されたバージョンは、 予告なく アスロックのウェブサイ トから 入手できるようになります。 このマザーボードに関する技術的なサポートが必要な 場合には、 ご使用のモデルについての詳細情報を、 当社のウェブサイ トで参照く だ さい。 ASRock のウェブサイ トでは、 最新の VGA カードおよび CPU サポート一覧も ご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock X370M Pro4-F マザーボード (マイクロ ATX フォームファクター) • ASRock X370M Pro4-F クイックインストールガイ ド...
  • Seite 142 ECC は PRO CPU のみに対応します。 * 詳細については、 ASRock ウェブサイ トのメモリーサポート一 覧を参照してく ださい。 (http://www.asrock.com/) * AMD の非 XMP メモリ周波数サポートについては、 22 ページ の表を参照してく ださい。 詳細については、 ASRock の Web サイ トの QVL を参照してく ださい。 • システムメモリの最大容量 : 64GB • DIMM スロッ トに 15 μゴールドコンタク トを採用...
  • Seite 143 X370M Pro4-F AMD Ryzen シリーズ CPU (Matisse、 Summit Ridge および 拡張スロッ ト Pinnacle Ridge) • 1 x PCI Express 3.0 x16 スロッ ト (PCIE2:x16 モード) * • 1 x PCI Express 2.0 x16 スロッ ト (PCIE3:x4 モード) AMD 第 7 世代 A シリーズ APU •...
  • Seite 144 Gb/s) までの M Key タイプ 2242/2260/2280 M.2 PCI Express モジュールに対応 (A シリーズ APU、 Athlon APU が搭載さ れている場合) ** ** 起動ディスクとして NVMe SSD に対応 ** ASRock U.2 キッ トに対応 • 1 x M.2 ソケッ ト (M2_2)、 M Key タイプ 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s モジュールに対応...
  • Seite 145 X370M Pro4-F • 1 x COM ポートヘッダー コネクタ • 1 x TPM ヘッダー • 1 x 電源 LED とスピーカーヘッダー • 1 x RGB LED ヘッダー * 合計 12V/3A、 36W までの LED ストリ ップに対応 • 1 x アドレサブル LED ヘッダー * 合計 5V/3A、 15W までの LED スト リ ップに対応...
  • Seite 146 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティ のオーバークロックツールの使用などを含む、 オーバークロックには、 一定のリスク を伴いますのでご注意く ださい。 オーバークロックするとシステムが不安定になった り、 システムのコンポーネントやデバイスが破損するこ とがあります。 ご自分の責任 で行ってく ださい。 弊社では、 オーバークロックによる破損の責任は負いかねますの でご了承く ださい。...
  • Seite 147 X370M Pro4-F 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピン に被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さっ ていない場合には、 ジャンパーは 「オープン」 です。 CMOS クリアジャンパー ショート : CMOS のク リア (CLRCMOS1) オープン : デフォルト 2 ピンジャンパー (p.1、 No. 18 参照) CLRCMOS1 は、 CMOS のデータをクリアするこ とができます。 クリアして、 デフォルト...
  • Seite 148 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタ にはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクタにジャンパー キャップを被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源スイッチを接続し、 スイッ PLED+ PLED- (9 ピン PANEL1) チをリセッ トし、 下記のピン割 PWRBTN# (p.1、 No. 13 参照) り当てに従って、 シャーシのシ ステムステータス表示ランプ をこのヘッダーにセッ トしま RESET# HDLED- す。 ケーブルを接続するとき HDLED+ には、 ピンの+と−に気をつ けてく ださい。 PWRBTN (電源スイッチ)...
  • Seite 149 X370M Pro4-F 電源 LED とスピーカーヘ シャーシ電源 LED とシャーシ SPEAKER DUMMY ッダー スピーカーをこのヘッダーに DUMMY (7 ピン SPK_PLED1) 接続してく ださい。 (p.1、 No. 14 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら 4 つの SATA3 コネクター は、 最高 6.0 Gb/ 秒のデータ転 (SATA3_1: p.1、 No. 12 参照) ( 上側)...
  • Seite 150 USB 3.2 Gen1 ヘッダー このマザーボードには 1 つの Vbus Vbus Vbus IntA_PB_SSRX- (19 ピン USB3_67) ヘッダーが装備されています。 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (p.1、 No. 7 参照) 各 USB 3.2 Gen1 ヘッダーは、 2 IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ つのポートをサポートできます。 IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy フロントパネルオーディ このヘッダーは、 フロントオー PRESENCE# オヘッダー...
  • Seite 151 X370M Pro4-F CPU ファンコネクタ このマザーボードは 4 ピン FAN_SPEED (4 ピン CPU_FAN1) FAN_VOLTAGE_CONTROL CPU ファン (静音ファン) コネク FAN_SPEED_CONTROL (p.1、 No. 2 参照) タが装備されています。 3 ピン の CPU ファンを接続する場合 には、 ピン 1-3 に接続してく だ さい。 ATX 電源コネクタ このマザーボードは 24 ピン (24 ピン ATXPWR1)...
  • Seite 152 RGB LED ヘッダー RGB LED ヘッダーは RGB LED (4 ピン 延長ケーブルの接続に使用さ 12V G R れ、 これによりユーザーはさまざ (RGB_HEADER1)) (p.1、 No. 21 参照) まな LED 証明効果から選択す るこ とができます。 注意 : RGB LED ケーブルは間 違った方向に取り付けないでく ださい。 間違った方向に取り付け るとケーブルが破損するこ とがあ ります。 * これら 2 つのヘッダーの詳しい 説明については...
  • Seite 153 恕不另行通知。如果本手册有任何修改,则更新的版本将发布在华擎网站上,我 们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的网站 以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支 持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 X370M Pro4-F 主板(Micro ATX 规格尺寸) • 华擎 X370M Pro4-F 快速安装指南 • 华擎 X370M Pro4-F 支持光盘 • 1 x I/O 面板 • 2 x 串行 ATA (SATA) 数据线(选购)...
  • Seite 154 内存 * * 对于 Ryzen 系列 CPU (Picasso 及 Raven Ridge),仅 PRO CPU 支 持 ECC。 * 请参阅华擎网站上的 Memory Support List(内存支持列表)了 解详情。(http://www.asrock.com/) * 请参考第 22 页的 AMD 非 XMP 内存频率支持表。更多详细信 息,请参考 ASRock 网站上的 QVL。 • 支持系统内存最大容量:64GB • DIMM 插槽中 15μ 金触点...
  • Seite 155 X370M Pro4-F AMD Ryzen 系列 CPU (Matisse、Summit Ridge 和 Pinnacle Ridge) 扩充槽 • 1 x PCI Express 3.0 x16 插槽(PCIE2:x16 模式)* • 1 x PCI Express 2.0 x16 插槽(PCIE3:x4 模式) AMD 7 代 A 系列 APU • 1 x PCI Express 3.0 x16 插槽(PCIE2:x8 模式)* •...
  • Seite 156 • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • 支持 Wake-On-LAN(网上唤醒) • 支持雷电 /ESD 保护 • 支持 LAN 线缆检测 • 支持高能效以太网 802.3az • 支持 PXE 后面板 I/O • 1 x PS/2 鼠标端口 • 1 x PS/2 键盘端口 • 1 x D-Sub 端口 •...
  • Seite 157 X370M Pro4-F • 1 x AMD 风扇 LED 接脚 * AMD 风扇 LED 接脚支持最大负载为 3A (36W)、最大长度为 2.5 米的 LED 灯条。 • 1 x CPU 风扇接口 (4 针 ) * CPU 风扇接口支持最高 1A (12W) 功率的 CPU 风扇。 • 2 x 机箱风扇接口 (1 x 4 针 , 1 x 3 针 )(智能风扇速度控制)...
  • Seite 158 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这 些针脚上没有装跳线帽,跳线 “开路”。 清除 CMOS 跳线 短接 : 清除 CMOS (CLRCMOS1) 开路 : 默认 2 针跳线 (见第 1 页,第 18 个) CLRCMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设置, 请关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRCMOS1 的针脚短接 5 秒。但是,请勿在更新 BIOS 后立即清除 CMOS。 如果您需要在刚完成 BIOS 更新后清除 CMOS,则必须先启动系统,并在关闭后再 执行清除...
  • Seite 159 X370M Pro4-F 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装到这 些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将机箱 PLED+ PLED- (9 针 PANEL1) 上的电源开关、重置开关和系 PWRBTN# (见第 1 页,第 13 个) 统状态指示灯连接到此接脚。 在连接线缆前请记下正负针 RESET# 脚。 HDLED- HDLED+ PWRBTN(电源开关): 连接到机箱前面板上的电源开关。您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。如果计算机死机,无法执行正常重新启动,按 重置开关重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系 统处在 S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,此...
  • Seite 160 电源 LED 和扬声器接脚 请将机箱电源 LED 和机箱扬 SPEAKER DUMMY (7 针 SPK_PLED1) 声器连接到此接脚。 DUMMY (见第 1 页,第 14 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这四个 SATA3 接口支持最高 (SATA3_1: 6.0 Gb/s 数据传输速率的内部 见第 1 页, 第 12 个)( 上 ) 存储设备的 SATA 数据线。 (SATA3_2: * M2_2 和...
  • Seite 161 X370M Pro4-F USB 3.2 Gen1 接脚 此主板上有一个接脚。每个 Vbus Vbus Vbus IntA_PB_SSRX- (19 针 USB3_67) USB 3.2 Gen1 接脚可以支持两 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (见第 1 页,第 7 个) 个端口。 IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板音频接脚 此接脚用于将音频设备连接 PRESENCE# (9 针 HD_AUDIO1) MIC_RET 到前音频面板。...
  • Seite 162 CPU 风扇接口 此主板提供 4 针 CPU 风扇 (静 FAN_SPEED FAN_VOLTAGE_CONTROL (4 针 CPU_FAN1) 音风扇)接口。如果您打算连 FAN_SPEED_CONTROL (见第 1 页, 接 3 针 CPU 风扇,请将它连 第 2 个) 接到针脚 1-3。 ATX 电源接口 此主板提供 24 针 ATX 电源接 (24 针 ATXPWR1) 口。要使用 20 针 ATX 电源, (见第...
  • Seite 163 X370M Pro4-F RGB LED 接脚 RGB LED 接脚用于连接 RGB (4- 针 RGB_HEADER1) LED 延长线,可让用户选择不 12V G R (见第 1 页,第 21 个) 同的 LED 灯光效果。 注意:RGB LED 线安装方向切 勿错误,否则,线缆会损坏。 * 请参考第 39 页了解这两个接 脚的详情。 可寻址 LED 接脚 此接脚用于连接可寻址 LED (3 针 ADDR_LED1) 延长线,可让用户选择不同的...
  • Seite 164 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Seite 165 知。如本手冊有任何修改,可至華擎網站逕行取得更新版本,不另外通知。若您 需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資 訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站 http://www.asrock.com. 1.1 包裝內容 • 華擎 X370M Pro4-F 主機板(Micro ATX 尺寸) • 華擎 X370M Pro4-F 快速安裝指南 • 華擎 X370M Pro4-F 支援光碟 • 1 x I/O 面板外罩 • 2 x Serial ATA (SATA) 資料纜線(選用)...
  • Seite 166 • AMD 第 7 代 A 系列 APU 支援 DDR4 2400/2133 非 ECC、 無緩衝記憶體 * * 若使用 Ryzen 系列 CPU (Picasso 與 Raven Ridge),僅 PRO CPU 支援 ECC。 * 如需更多資訊,請參閱華擎網站上的記憶體支援表。 (http://www.asrock.com/) * 如需 AMD 非 XMP 記憶體頻率支援的資料表,請參閱第 22 頁。如需更詳細的資訊,請參閱 ASRock 網站上的 QVL。 • 最大系統記憶體容量:64GB • 15μ 特厚鍍金插槽...
  • Seite 167 X370M Pro4-F AMD Ryzen 系列 CPU (Matisse、Summit Ridge 及 Pinnacle 擴充插槽 Ridge) • 1 x PCI Express 3.0 x16 插槽 (PCIE2:x16 模式 )* • 1 x PCI Express 2.0 x16 插槽 (PCIE3:x4 模式 ) AMD 7 A-Series APUs • 1 x PCI Express 3.0 x16 插槽 (PCIE2:x8 模式 )* •...
  • Seite 168 • 7.1 CH HD 音訊含內容保護(Realtek ALC892 音訊轉碼器) 音訊 功能 • 高階藍光音訊支援 • 支援突波保護 • ELNA 音響級電容 • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • 支援網路喚醒 • 支援雷擊/靜電保護 • 支援 LAN 纜線偵測 • 支援 802.3az EEE 節能乙太網路 • 支援 PXE •...
  • Seite 169 X370M Pro4-F • 1 x COM 連接埠排針 接頭 • 1 x TPM 排針 • 1 x 電源 LED 及喇叭排針 • 1 x RGB LED 排針 * 總計最高支援 12V/3A,36W LED 條燈 • 1 x 可定址 LED 排針 * 總計最高支援 5V/3A,15W LED 條燈...
  • Seite 170 • Microsoft® Windows® 10 64-bit 作業系統 • FCC、CE 認證 • ErP/EuP ready(須具備 ErP/EuP ready 電源供應器) * 如需產品詳細資訊,請上我們的網站:http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採 用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性, 或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。我 們對於因超頻所造成的可能損害概不負責。...
  • Seite 171 X370M Pro4-F 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒有 跳線帽套在針腳上,該跳線為「開啟」。 清除 CMOS 跳線 短路: 清除 CMOS (CLRCMOS1) 2-pin 跳線 開啟: 預設 (請參閱第 1 頁,編號 18) 您可利用 CLRCMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設設 定,請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後,請使用 跳線帽讓 CLRCMOS1 上的 pin 短路約 5 秒。不過,請不要在更新 BIOS 後立即清 除 CMOS。若您需在更新 BIOS 後立即清除 CMOS,則必須先重新啟動系統,然...
  • Seite 172 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在 排針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列將機殼 PLED+ PLED- (9-pin PANEL1) 上的電源開關、重設開關及系 PWRBTN# (請參閱第 1 頁,編號 13) 統狀態指示燈連接至此排針。 在連接纜線之前請注意正負針 RESET# 腳。 HDLED- HDLED+ PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動,按下重 設開關即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此 LED 會亮起。系 統進入...
  • Seite 173 X370M Pro4-F 電源 LED 及喇叭排針 請將機殼電源 LED 及機殼喇 SPEAKER DUMMY (7-pin SPK_PLED1) 叭連接至此排針。 DUMMY (請參閱第 1 頁,編號 14) PLED+ PLED+ PLED- Serial ATA3 接頭 這四組 SATA3 接頭皆支援內部 (SATA3_1: 儲存裝置的 SATA 資料纜線, 請參閱第 1 頁,編號 12)( 上 ) 最高可達 6.0 Gb/s 資料傳輸...
  • Seite 174 USB 3.2 Gen1 排針 此主機板上有一個排針。各 Vbus Vbus Vbus IntA_PB_SSRX- (19-pin USB3_67) USB 3.2 Gen1 排針皆可支援兩 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (請參閱第 1 頁,編號 7) 個連接埠。 IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板音訊排針 本排針適用於連接音訊裝置 PRESENCE# (9-pin HD_AUDIO1) MIC_RET 至前面板音訊。 OUT_RET (請參閱第...
  • Seite 175 X370M Pro4-F CPU 風扇接頭 本主機板配備 4-Pin CPU 風扇 FAN_SPEED FAN_VOLTAGE_CONTROL (4-pin CPU_FAN1) ( 靜音風扇 ) 接頭。若您計畫 FAN_SPEED_CONTROL (請參閱第 1 頁, 連接 3-Pin CPU 風扇,請接至 編號 2) Pin 1-3。 ATX 電源接頭 本主機板配備一組 24-pin (24-pin ATXPWR1) ATX 電源接頭。若要使用 20- (請參閱第 1 頁,編號 6)...
  • Seite 176 RGB LED 排針 RGB LED 排針用於連接 RGB (4-pin RGB_HEADER1) LED 延長線,可供使用者選擇 12V G R ( 請參閱第 1 頁,編號 21) 各種 LED 照明效果。 警告:切勿以錯誤方向安裝 RGB LED 纜線,否則纜線可能 損壞。 * 關於這兩種排針的詳細說明, 請參閱第 39 頁。 可定址 LED 排針 此排針用於連接可讓使用者選 (3-pin ADDR_LED1) 擇各種 LED 燈效的可定址 LED (請參閱第...
  • Seite 177 ECC, memori tanpa buffer* * Untuk CPU Seri Ryzen (Picasso dan Raven Ridge), ECC hanya didukung dengan CPU PRO. * Lihat Daftar Dukungan Memori di situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) * Silakan lihat halaman 22 untuk table dukungan frekuensi memo- ru non-XMP AMD.
  • Seite 178 CPU Seri AMD Ryzen (Matisse, Summit Ridge, dan Pinnacle Slot Ekspansi Ridge) • 1 x Slot PCI Express 3.0 x16 (PCIE2:x16 mode)* • 1 x Slot PCI Express 2.0 x16 (PCIE3:x4 mode) APU AMD 7th Seri A • 1 x Slot PCI Express 3.0 x16 (PCIE2:x8 mode)* • 1 x Slot PCI Express 2.0 x16 (PCIE3:x4 mode) CPU Seri AMD Ryzen (Picasso, Raven Ridge) • 1 x Slot PCI Express 3.0 x16 (PCIE2:x8 mode)*...
  • Seite 179 Pinnacle Ridge) atau Gen3 x2 (16 Gb/s) (dengan APU seri A dan Athlon APU) ** Mendukung SSD NVMe sebagai disk boot ** Mendukung Kit ASRock U.2 • 1 x Soket M.2 (M2_2), mendukung modul tipe Kunci M 2230/2242/2260/2280 M.2 SATA3 6,0 Gb/s**...
  • Seite 180 Konektor • 1 x Header Port COM • 1 x Header TPM • 1 x Header LED Daya dan Speaker • 1 x Header LED RGB * Mendukung total Strip LED hingga 12V/3A, 36W • 1 x Kipas Header LED AMD • 1 x Addressable LED Header * Mendukung total Strip LED hingga 5V/3A, 15W * Kipas Header LED AMD mendukung LED strip dengan...
  • Seite 181 • FCC, CE • Mendukung ErP/EuP (memerlukan catu daya untuk ErP/EuP) * Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengatu- ran pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga.
  • Seite 182: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Seite 183: Declaration Of Conformity

    13848 Magnolia Ave, Chino, CA91710 Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard X370M Pro4-F Model Number : Conforms to the following speci cations: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Seite 184: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) X370M Pro4-F / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Inhaltsverzeichnis