Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Version 1.0
Published October 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK X299 Steel Legend

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Seite 3: Motherboard-Layout

    X299 Steel Legend Motherboard Layout RGB_HEADER2 CPU_FAN2 CPU_FAN1 ATX12V1 ATX12V2 ADDR_LED2 DRAM BOOT CLRC BTN1 2066 Socket USB 2.0 Top: T: USB3 RJ-45 (I219V ) B: USB4 USB 3.2 Gen1 Top: T: USB1 RJ-45 I211AT B: USB2 USB 3.2 Gen1 T: USB3_3 USB 3.2 Gen2x2...
  • Seite 4 No. Description 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) ATX 12V Power Connector (ATX12V1) ATX 12V Power Connector (ATX12V2) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2) 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1) CPU / Waterpump Fan Connector (CPU_FAN2/WP) RGB LED Header (RGB_HEADER2)
  • Seite 5 X299 Steel Legend I/O Panel No. Description Description USB 2.0 Port (USB_12) USB 3.2 Gen1 Port (USB3_3) LAN RJ-45 Port (Intel® I219V)* USB 3.2 Gen2x2 Type-C Port LAN RJ-45 Port (Intel® I211AT)* (USB31_TC_1) Central / Bass (Orange) USB 3.2 Gen1 Ports (USB3_12) Rear Speaker (Black) USB 2.0 Port (USB_34)
  • Seite 6 **If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. Audio Output Front Speaker Rear Speaker Central / Bass Line In Channels (No.
  • Seite 7: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 8: Specifications

    2666/2400/2133 non-ECC, un-buffered memory * The maximum memory frequency supported may vary by processor type. * Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/) • Max. capacity of system memory: 256GB • Supports Intel® Extreme Memory Profile (XMP) 2.0 • 15μ...
  • Seite 9 • 7.1 CH HD Audio with Content Protection (Realtek ALC1220 Audio Codec) • Premium Blu-ray Audio support • Supports Surge Protection (ASRock Full Spike Protection) • Supports Purity Sound - Nichicon Fine Gold Series Audio Caps - 120dB SNR DAC with Differential Amplifier...
  • Seite 10 • HD Audio Jacks: Rear Speaker / Central / Bass / Line in / Front Speaker / Microphone (Gold Audio Jacks) Storage • 8 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 17 and Intel Smart Response Technology), NCQ, AHCI and Hot Plug* * If M2_1 is occupied by a SATA-type M.2 device, SATA3_1 will...
  • Seite 11 X299 Steel Legend * CPU_FAN2/WP, CHA_FAN1~5/WP can auto detect if 3-pin or 4-pin fan is in use. • 1 x 24 pin ATX Power Connector (Hi-Density Power Connector) • 2 x 8 pin 12V Power Connectors (Hi-Density Power Connector) • 1 x Front Panel Audio Connector (15μ Gold Audio Connector) • 1 x Thunderbolt AIC Connector (5-pin)
  • Seite 12 * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system.
  • Seite 13: Chapter 2 Installation

    X299 Steel Legend Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Seite 14: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 2066-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Seite 15 X299 Steel Legend...
  • Seite 16 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Seite 17 X299 Steel Legend 2.2 Installing the CPU Fan and Heatsink...
  • Seite 18 2.3 Installation of Memory Modules (DIMM) This motherboard provides eight 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Quad Channel Memory Technology. 1. For quad channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Seite 19 X299 Steel Legend...
  • Seite 20 2.4 Expansion Slots (PCI Express Slots) There are 5 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Seite 21 X299 Steel Legend PCIe Slot Configurations (For CPU with 44 PCIe lanes) PCIE1 PCIE2 PCIE3 PCIE5 Single Graphics Card Two Graphics Cards in CrossFireX or SLI Mode Three Graphics Cards in 3-Way CrossFireX Mode or 3-Way SLI Mode PCIe Slot Configurations (For CPU with 28 PCIe lanes)
  • Seite 22 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when a jumper cap is placed on these 2 pins.
  • Seite 23 X299 Steel Legend 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
  • Seite 24 Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 22) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These eight SATA3 (SATA3_0_1: connectors support SATA see p.1, No.
  • Seite 25 X299 Steel Legend USB 3.2 Gen1 Header There is one header on Dummy IntA_PA_D+ IntA_PB_D+ IntA_PA_D- (19-pin USB3_4_5) this motherboard. This IntA_PB_D- IntA_PA_SSTX+ (see p.1, No. 15) USB 3.2 Gen1 header can IntA_PB_SSTX+ IntA_PA_SSTX- IntA_PB_SSTX- support two ports. IntA_PA_SSRX+ IntA_PB_SSRX+...
  • Seite 26 Chassis Water Pump Fan This motherboard Connectors provides five 4-Pin water (4-pin CHA_FAN1/WP) cooling chassis fan FAN_VOLTAGE (see p.1, No. 34) connectors. If you plan to CHA_FAN_SPEED FAN_SPEED_CONTROL (4-pin CHA_FAN2/WP) connect a 3-Pin chassis (see p.1, No. 20) water cooler fan, please connect it to Pin 1-3.
  • Seite 27 X299 Steel Legend ATX 12V Power This motherboard Connectors provides two 8-pin ATX (8-pin ATX12V1) 12V power connectors. To (see p.1, No. 3) use a 4-pin ATX power (8-pin ATX12V2) supply, please plug it along (see p.1, No. 4) Pin 1 and Pin 5.
  • Seite 28 RGB LED Headers These two RGB headers are used (4-pin RGB_HEADER1) to connect RGB LED 12V G R (see p.1, No. 30) extension cable which allows (4-pin RGB_HEADER2) users to choose from various LED (see p.1, No. 9) lighting effects. Caution: Never install the RGB LED cable in the wrong orienta- tion;...
  • Seite 29 X299 Steel Legend Virtual RAID On CPU This connector supports Intel® Header Virtual RAID on CPU and (4-pin VROC1) NVME/AHCI RAID on CPU +3VSB (see p.1, No. 14) PCIE. VROC RAID KEY With the introduction of the Intel VROC product, there are three modes of operation:...
  • Seite 30: Smart Switch

    2.7 Smart Switch The motherboard has a smart switch: Clear CMOS Button, allowing users to quickly clear the CMOS values. Clear CMOS Button Clear CMOS Button (CLRCBTN1) allows users to quickly (see p.3, No. 14) clear the CMOS values. This function is workable only when you power off your computer and unplug the power supply.
  • Seite 31 X299 Steel Legend 2.8 Post Status Checker Post Status Checker (PSC) diagnoses the computer when users power on the machine. It emits a red light to indicate whether the CPU, memory, VGA or stor- age is dysfunctional. The lights go off if the four mentioned above are functioning...
  • Seite 32 2.9 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 33 X299 Steel Legend Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. Step 4 Prepare the M.2 standoff that comes with the package. Then hand tighten the standoff into the desired nut location on the motherboard.
  • Seite 34 M.2_SSD (NGFF) Module Support List Vendor Interface ADATA SATA3 AXNS330E-32GM-B ADATA SATA3 AXNS381E-128GM-B ADATA SATA3 AXNS381E-256GM-B ADATA SATA3 ASU800NS38-256GT-C ADATA SATA3 ASU800NS38-512GT-C ADATA PCIe3 x4 ASX8000NP-256GM-C ADATA PCIe3 x4 ASX8000NP-512GM-C Crucial SATA3 CT120M500SSD4 Crucial SATA3 CT240M500SSD4 Intel SATA3 Intel SSDSCKGW080A401/80G Intel PCIe3 x4 SSDPEKKF256G7...
  • Seite 35 X299 Steel Legend SATA3 WDS100T1B0B-00AS40 SATA3 WDS240G1G0B-00RC30 PCIe3 x4 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 36 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 37 X299 Steel Legend Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module.
  • Seite 38 M.2_SSD (NGFF) Module Support List Vendor Interface ADATA SATA3 AXNS381E-128GM-B ADATA SATA3 AXNS381E-256GM-B ADATA SATA3 ASU800NS38-256GT-C ADATA SATA3 ASU800NS38-512GT-C ADATA PCIe3 x4 ASX7000NP-128GT-C ADATA PCIe3 x4 ASX8000NP-256GM-C ADATA PCIe3 x4 ASX7000NP-256GT-C ADATA PCIe3 x4 ASX8000NP-512GM-C ADATA PCIe3 x4 ASX7000NP-512GT-C Apacer PCIe3 x4 AP240GZ280 Corsair...
  • Seite 39 X299 Steel Legend TEAM PCIe3 x4 TM8FP2240G0C101 TEAM PCIe3 x4 TM8FP2480GC110 Transcend SATA3 TS512GMTS600 Transcend SATA3 TS512GMTS800 V-Color SATA3 VLM100-120G-2280B-RD V-Color SATA3 VLM100-240G-2280RGB V-Color SATA3 VSM100-240G-2280 V-Color SATA3 VLM100-240G-2280B-RD SATA3 WDS100T1B0B-00AS40 SATA3 WDS240G1G0B-00RC30 PCIe3 x4 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for...
  • Seite 40 2.11 ASRock Polychrome SYNC ASRock Polychrome SYNC is a lighting control utility specifically designed for unique indi- viduals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Seite 41 X299 Steel Legend Connecting the Addressable RGB LED Strip Connect your Addressable RGB LED strip to the Addressable LED Header (ADDR_LED1, ADDR_LED2 ) on the motherboard. ADDR_LED2 DO_ADDR VOUT ADDR_LED1 DO_ADDR VOUT 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged.
  • Seite 42 ASRock Polychrome SYNC Utility Now you can adjust the RGB LED color through the ASRock Polychrome SYNC Utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Seite 43 X299 Steel Legend 1 Einleitung Vielen Dank, dass Sie sich für das X299 Steel Legend von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 44: Technische Daten

    3200(OC)/2933(OC)/2800(OC)/2666/2400/2133 * Die maximal unterstützte Speicherfrequenz kann je nach Prozessortyp variieren. * Weitere Informationen finden Sie in der Speicherkompatibilitätsliste auf der ASRock-Webseite. (http://www.asrock.com/) • Systemspeicher, max. Kapazität: 256GB • Unterstützt Intel® Extreme Memory Profile (XMP) 2.0 • 15-μ-Goldkontakt in DIMM-Steckplätze Erweiterungss- • 4 x PCI-Express 3.0-x16-Steckplatz*...
  • Seite 45 PCIE3) • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC1220- Audio Audiocodec) • Erstklassige Blu-ray-Audiounterstützung • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • Unterstützt Purity Sound - Nichicon-Audiokappen der Fine Gold-Serie - 120-dB-SRV-DAC mit Differentialverstärker - NE5532 – erstklassiger Headset-Verstärker für Audioanschluss an der Frontblende (unterstützt Headsets...
  • Seite 46 • HD-Audioanschlüsse: Hintere Lautsprecher / Zentral / Bass / Line-in / Vorderer Lautsprecher / Mikrofon (goldene Audioanschlüsse) Speicher • 8 x SATA-III-6,0-Gb/s-Anschlüsse, unterstützt RAID (RAID 0, RAID 1, RAID 5, RAID 10, • Intel Rapid Storage Technology 17 und Intel Smart Response Technology), NCQ, AHCI und Hot-Plugging* * Wenn M2_1 durch ein SATA-Typ-M.2-Gerät belegt ist, wird SATA3_1 deaktiviert.
  • Seite 47 X299 Steel Legend * CPU_FAN2/WP und CHA_FAN1~5/WP können automatisch erkennen, ob ein 3- oder 4-poliger Lüfter verwendet wird. • 1 x 24-poliger ATX-Netzanschluss (hochdichter Netzanschluss) • 2 x 8-poliger 12-V-Netzanschlüsse (hochdichter Netzanschluss) • 1 x Audioanschluss an der Frontblende (15μ goldene Audioanschluss) • 1 x Thunderbolt Erweiterungskartenanschluss (5-polig)
  • Seite 48 * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind. Eine Übertaktung kann sich auf die Stabilität Ihres Systems auswirken und sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Seite 49: Jumpereinstellung

    X299 Steel Legend 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“...
  • Seite 50: Integrierte Stiftleisten Und Anschlüsse

    1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste Verbinden Sie Ein-/ PLED+ PLED- (9-polig, PANEL1)
  • Seite 51 X299 Steel Legend Betrieb-LED- und Bitte verbinden Sie die Betrieb- SPEAKER DUMMY Lautsprecher-Stiftleiste LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 22) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese acht SATA-III-Anschlüsse (SATA3_0_1: unterstützen SATA-Datenkabel siehe S.
  • Seite 52 USB 3.2 Gen1-Stiftleiste Es gibt eine Stiftleiste an Dummy IntA_PA_D+ (19-polig, USB3_4_5) diesem Motherboard. IntA_PB_D+ IntA_PA_D- IntA_PB_D- (siehe S. 1, Nr. 15) Diese USB-3.2-Gen1- IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- Stiftleiste kann zwei Ports IntA_PB_SSTX- IntA_PA_SSRX+ unterstützen. IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- Vbus Typ-C-USB-3.2 Gen1- Es gibt eine Typ-C- Stiftleiste für die USB-3.2 Gen1-Stiftleiste...
  • Seite 53 X299 Steel Legend Gehäuse-Wasserpumpen- Dieses Motherboard Lüfteranschlusse bietet vier 4-polige (4-polig, CHA_FAN1/WP) Wasserkühlung- (siehe S. 1, Nr. 34) FAN_VOLTAGE Gehäuselüfteranschlüsse. CHA_FAN_SPEED (4-polig, CHA_FAN2/WP) FAN_SPEED_CONTROL (siehe S. 1, Nr. 20) Falls Sie einen 3-poligen Gehäuse-Wasserkühlerlüfter anschließen möchten, (4-polig, CHA_FAN3/WP) verbinden Sie ihn bitte mit (siehe S.
  • Seite 54 ATX-12-V-Netzanschlüsse Dieses Motherboard bietet (8-polig, ATX12V1) zwei 8-polige ATX-12- (siehe S. 1, Nr. 3) V-Netzanschlüsse. Bitte (8-polig, ATX12V2) schließen Sie es zur Nutzung (siehe S. 1, Nr. 4) eines 4-poligen ATX- Netzteils entlang Kontakt 1 und Kontakt 5 an. *Warnung: Bitte stellen Sie sicher, dass das Stromkabel der CPU und nicht das der Grafikkarte angeschlossen...
  • Seite 55 X299 Steel Legend RGB-LED-Stiftleisten Diese beiden RGB- (4-polig, RGB_HEADER1) Stiftleisten dienen dem 12V G R (siehe S. 1, Nr. 30) Anschließen eines RGB- (4-polig, RGB_HEADER2) LED-Erweiterungskabels, (siehe S. 1, Nr. 9) das dem Nutzer die Auswahl zwischen verschiedenen LED- Lichteffekten ermöglicht.
  • Seite 56 Virtual RAID an der CPU- Dieser Anschluss unterstützt Stiftleiste Intel® Virtual RAID an CPU und (4-polig VROC1) NVME/AHCI RAID an CPU +3VSB (siehe S. 1, Nr. 14) PCIE. VROC RAID KEY Mit der Einführung des Intel-VROC-Produktes gibt es drei Betriebsmodi: HW-Taste erforderlich Wesentliche Funktionen und Merkmale • Nur Pass-thru (ohne RAID)
  • Seite 57: Intelligente Schalter

    X299 Steel Legend 1.5 Intelligente Schalter Das Motherboard hat einen intelligenten Schalter: CMOS-löschen-Taste, ermöglicht Benutzer das schnelle Löschen der CMOS-Werte. CMOS-löschen-Taste Mit der CMOS-löschen-Taste können (CLRCBTN1) Benutzer die CMOS-Werte schnell (siehe S. 3, Nr. 14) löschen. Diese Funktion ist nur verfügbar, wenn Sie Ihren Computer abschalten und die Stromver-...
  • Seite 58: Contenu De L'emballage

    Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez. La liste la plus récente des cartes VGA et des processeurs pris en charge est également disponible sur le site Internet de ASRock. Site Internet ASRock http://www.asrock.com.
  • Seite 59: Spécifications

    * La fréquence mémoire maximale prise en charge peut varier selon le type de processeur. * Veuillez consulter la liste de prise en charge des mémoires sur le site Web d'ASRock pour de plus amples informations. (http:// www.asrock.com/) • Capacité max. de la mémoire système : 256Go • Prend en charge Intel®...
  • Seite 60 • Audio 7.1 CH HD avec protection du contenu (codec audio Realtek ALC1220) • Compatible audio Blu-ray Premium • Protection contre les surtensions (Protection complète contre les pics ASRock) • Prend en charge Purity Sound - Couvercles audio série en or fin Nichicon - 120dB SNR DAC avec amplificateur différentiel - Amplificateur de casque NE5532 Premium pour connecteur audio sur panneau avant (prend en charge les casques jusqu’à...
  • Seite 61 X299 Steel Legend • Connecteurs jack audio HD : Haut-parleur arrière / central / basses / entrée ligne / haut-parleur avant / microphone (Connecteurs jack audio or) Stockage • 8 x connecteurs SATA3 6,0 Gbit/s, prise en charge de RAID (RAID 0, RAID 1, RAID 5, RAID 10, • technologies Intel Rapid Storage 17 et Intel Smart Response),...
  • Seite 62 * CPU_FAN2/WP et CHA_FAN1~5/WP peuvent détecter automatiquement si un ventilateur 3 broches ou 4 broches est utilisé. • 1 x connecteur d’alimentation ATX 24 broches (connecteur d’alimentation haute densité) • 2 x connecteur d’alimentation 12V 8 broches (connecteur d’alimentation haute densité) • 1 x Connecteur audio panneau avant (15μ...
  • Seite 63 X299 Steel Legend * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o verclocking présente certains risques, incluant des modifications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’ o verclocking développés par des tiers.
  • Seite 64 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court-circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ». L’illustration représente un cavalier à...
  • Seite 65 X299 Steel Legend 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Seite 66 Prise DEL d’alimentation et Veuillez brancher la DEL SPEAKER DUMMY haut-parleur d'alimentation du châssis et le DUMMY (SPK_PLED1 à 7 broches) haut-parleur du châssis sur ce (voir p.1, No. 22) connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces huit connecteurs SATA3 (SATA3_0_1: sont compatibles avec les voir p.1, No.
  • Seite 67 X299 Steel Legend Embase USB 3.2 Gen1 Cette carte mère Dummy IntA_PA_D+ (USB3_4_5 à 19 broches) comprend un IntA_PB_D+ IntA_PA_D- IntA_PB_D- (voir p.1, No. 15) connecteur. Cette IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- embase USB 3.2 Gen1 IntA_PB_SSTX- IntA_PA_SSRX+ peut prendre en charge...
  • Seite 68 Connecteurs du ventilateur Cette carte mère est dotée de pompe à eau du châssis de cinq connecteurs pour (CHA_FAN1/WP à ventilateur de châssis à 4 broches) FAN_VOLTAGE refroidissement par eau à CHA_FAN_SPEED (voir p.1, No. 34) 4 broches. Si vous envisagez FAN_SPEED_CONTROL (CHA_FAN2/WP à...
  • Seite 69 X299 Steel Legend Connecteur d’alimentation Cette carte mère est dotée de deux connecteurs ATX 12V d’alimentation ATX 12V à (ATX12V1 à 8 broches) 8 broches. Pour utiliser une (voir p.1, No. 3) alimentation ATX à (ATX12V2 à 8 broches) 4 broches, veuillez effectuer les (voir p.1, No.
  • Seite 70 Embase LED RVB Ces deux embases RVB servent (RGB_HEADER1 à à connecter le câble d'extension 12V G R 4 broches) LED RVB qui permet aux (voir p.1, No. 30) utilisateurs de choisir parmi (RGB_HEADER2 plusieurs effets lumineux LED. Attention : N'installez jamais 4 broches) (voir p.1, No.
  • Seite 71 X299 Steel Legend Virtual RAID sur embase Ce connecteur prend en charge de processeur Intel® Virtual RAID sur processeur (VROC1 à 4 broches) et NVME/AHCI RAID sur +3VSB (voir p.1, No. 14) processeur PCIE. VROC RAID KEY Avec le lancement du produit Intel VROC,il existe trois modes de fonctionnement: Touche HW requise Fonctions principales • Intercommunication uniquement (pas de...
  • Seite 72 1.5 Bouton intelligent La carte mère dispose d'un commutateur intelligent : Bouton d’ e ffacement Clear CMOS, permettant aux utilisateurs d’ e ffacer rapidement les valeurs CMOS. Bouton Clear CMOS Le bouton d’ e ffacement Clear CMOS (CLRCBTN1) permet aux utilisateurs d’ e ffacer les (voir p.3, No.
  • Seite 73: Contenuto Della Confezione

    Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in uso.
  • Seite 74 * La frequenza di memoria massima supportata potrebbe variare in base al tipo di processore. * Per maggiori informazioni fare riferimento all'elenco dei supporti di memoria sul sito di ASRock. (http://www.asrock.com/) • Capacità max. della memoria di sistema: 256GB • Supporto di XMP (Extreme Memory Profile) Intel® 2.0 • Contatti d’...
  • Seite 75 • Audio HD a 7.1 canali con Content Protection (codec audio Realtek ALC1220) • Supporto audio Blu-ray Premium • Supporto protezione da sovratensione (protezione completa ASRock dai picchi di corrente) • Supporto di Purity Sound - Cappucci audio Nichicon serie Fine Gold - 120dB SNR DAC con amplificatore differenziale...
  • Seite 76 • Connettori audio HD: altoparlante posteriore/centrale/basso/ ingresso linea/altoparlante anteriore/microfono (connettori audio dorati) Archiviazione • 8 x connettori SATA3 6.0 Gb/s, supporto RAID (RAID 0, RAID 1, RAID 5, RAID 10, • Intel Rapid Storage Technology 17 e Intel Smart Response Technology), NCQ, AHCI e Hot Plug * * Se M2_1 è...
  • Seite 77 X299 Steel Legend * CPU_FAN2/WP, CHA_FAN1~5/WP sono in grado di rilevare se è in uso una ventola a 3 pin o 4 a pin. • 1 x connettore alimentazione ATX 24-pin (connettore alimentazione ad alta densità) • 2 x connettori alimentazione 12V 8 pin (connettore alimentazione ad alta densità)
  • Seite 78 * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking può influenzare la stabilità del sistema o perfino provocare danni ai componenti e ai dispositivi del sistema.
  • Seite 79 X299 Steel Legend 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati"...
  • Seite 80 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre. Header sul pannello del Collegare il tasto PLED+...
  • Seite 81 X299 Steel Legend Connettore LED Collegare i LED alimentazione e SPEAKER DUMMY alimentazione e l’altoparlante a questo connettore. DUMMY altoparlante (SPK_PLED1 a 7 pin) (vedere pag. 1, n. 22) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi otto connettori SATA3 (SATA3_0_1: supportano cavi di trasmissione vedere pag.
  • Seite 82 Header USB 3.2 Gen1 Su questa scheda madre Dummy IntA_PA_D+ (USB3_4_5 a 19 pin) c’ è un connettore. Questa IntA_PB_D+ IntA_PA_D- IntA_PB_D- (vedere pag. 1, n. 15) basetta USB 3.2 Gen1 può IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- supportare due porte. IntA_PB_SSTX- IntA_PA_SSRX+ IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX-...
  • Seite 83 X299 Steel Legend Connettori ventola pompa Questa scheda madre è dotata dell’acqua telaio di cinque connettori ventola a (CHA_FAN1/WP a 4 pin) 4 pin per il raffreddamento ad FAN_VOLTAGE (vedere pag. 1, n. 34) acqua del telaio. Se si decide...
  • Seite 84 Connettore di Questa scheda madre è dotata di alimentazione ATX da 12 V due connettori di alimentazione (ATX12V1 a 8 pin) ATX da 12 V a 8 pin. Per (vedere pag. 1, n. 3) utilizzare un'alimentazione (ATX12V2 a 8 pin) ATX a 4 pin, collegarla lungo il (vedere pag.
  • Seite 85 X299 Steel Legend Collettore LED RGB Questi due collettori RGB (RGB_HEADER1 a 4 pin) vengono utilizzati per collegare 12V G R (vedere pag. 1, n. 30) la prolunga LED RGB, che (RGB_HEADER2 a 4 pin) consente agli utenti di scegliere (vedere pag.
  • Seite 86 RAID virtuale su Questo connettore supporta connettore CPU RAID virtuale Intel® su CPU e (VROC1 a 4 pin) RAID NVME/AHCI su PCIE +3VSB (vedere pag. 1, n. 14) CPU. VROC RAID KEY Con l'introduzione del prodotto Intel VROC, ci sono tre modalità di funzionamento: Tasto hardware richiesto Caratteristiche principali • Solo Pass-through (no RAID)
  • Seite 87: Interruttore Automatico

    X299 Steel Legend 1.5 Interruttore automatico La scheda madre dispone di un interruttore intuitivo: Il tasto Cancella CMOS consente agli utenti di cancellare rapidamente i valori CMOS. Tasto Cancella CMOS Il tasto Cancella CMOS consente agli (CLRCBTN1) utenti di cancellare rapidamente i valori (fare riferimento a CMOS.
  • Seite 88: Contenido Del Paquete

    1 Introducción Gracias por comprar la placa base ASRock X299 Steel Legend, una placa base fiable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock.
  • Seite 89: Especificaciones

    * Para obtener más información, consulte la lista de memorias compatibles en el sitio web de ASRock. (http://www.asrock.com/) • Capacidad máxima de memoria del sistema: 256GB • Admite Perfil de memoria extremo de Intel® (XMP) 2.0 • Contacto 15μ...
  • Seite 90 ALC1220 Audio Codec) • Compatible con audio Blu-ray Premium • Compatible con protección por sobretensión (protección total contra picos de ASRock) • Compatible con Purity Sound - Tapas de audio Nichicon de la serie Fine Gold - 120dB SNR DAC con amplificador diferencial...
  • Seite 91 X299 Steel Legend • Conector de audio HD: Altavoz trasero / Central / Graves / Entrada de línea / Altavoz frontal / Micrófono (conectores de audio de oro) Almacenamiento • 8 x conectores SATA3 de 6,0 Gb/s, compatible con RAID (RAID 0, RAID 1, RAID 5, RAID 10, • Intel Rapid Storage Technology 17 e Intel Smart Response...
  • Seite 92 * CPU_FAN2/WP y CHA_FAN1~5/WP se pueden detectar automáticamente si se usa el ventilador de 3 o 4 contactos. • 1 x Conector de alimentación de 24 contactos y ATX (conector de alimentación de alta densidad) • 2 x Conectores de alimentación de 8 pines y 12V (conector de alimentación de alta densidad) • 1 x Conector de audio en el panel frontal (15μ...
  • Seite 93 X299 Steel Legend * Para obtener información detallada del producto, visite nuestro sitio Web: http://www.asrock.com Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando las herramientas de overclocking de otros fabricantes.
  • Seite 94 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”. La ilustración muestra un puente de 3 contactos cuyo contacto 1 y contacto 2 son “Cortos”...
  • Seite 95 X299 Steel Legend 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Seite 96 LED de alimentación y Conecte el LED de SPEAKER DUMMY base de conexiones para la alimentación del chasis y el DUMMY altavoz altavoz del chasis a esta base (SPK_PLED1 de 7 de conexiones. contactos) PLED+ (consulte la pág. 1, nº 22) PLED+ PLED- Conectores Serie ATA3...
  • Seite 97 X299 Steel Legend Cabezal USB 3.2 Gen1 Esta placa base tiene Dummy IntA_PA_D+ (USB3_4_5 de 19 pines) otra base de conexiones. IntA_PB_D+ IntA_PA_D- IntA_PB_D- (consulte la pág. 1, nº 15) Esta base de conexiones IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- USB 3.2 Gen1 admite...
  • Seite 98 Conectores del ventilador Esta placa base incluye cinco de la bomba de agua del conectores para el ventilador chasis del chasis para sistemas de (CHA_FAN1/WP de 4 refrigeración por agua de contactos) 4 clavijas. Si tiene pensando FAN_VOLTAGE CHA_FAN_SPEED (consulte la pág. 1, nº 34) conectar un ventilador FAN_SPEED_CONTROL (CHA_FAN2/WP de 4...
  • Seite 99 X299 Steel Legend Conector de alimentación Esta placa base contiene dos ATX de 12V conectores de alimentación (ATX12V1 de 8 contactos) ATX de 12V y 8 pines. (consulte la pág. 1, nº 3) Para utilizar una toma de (ATX12V2 de 8 contactos) alimentación ATX de...
  • Seite 100 Cabezales de LED RGB Estas dos bases de conexiones (RGB_HEADER1 de RGB se utilizan para conectar 12V G R 4 pines) el alargador de LED RGB (consulte la pág. 1, nº 30) que permite a los usuarios (RGB_HEADER2 de elegir entre varios efectos de 4 pines) iluminación de LED.
  • Seite 101 X299 Steel Legend RAID virtual en base de Este conector admite RAID virtual conexiones de CPU en CPU de Intel® y RAID NVME/ (VROC1 de 4 contactos) AHCI en CPU PCIE. +3VSB (consulte la pág. 1, nº 14) VROC RAID KEY Con la introducción del producto VROC de Intel, existen tres modos de funcionamiento:...
  • Seite 102 1.5 Interruptor inteligente La placa base tiene un conmutador inteligente: Botón de Borrado CMOS, que permite a los usuarios borrar rápidamente los valores CMOS. Botón Borrar la memoria El botón Borrar la memoria CMOS CMOS permite a los usuarios borrar (CLRCBTN1) rápidamente los valores de la memoria (consulte la pág.3, N.º...
  • Seite 103: Комплект Поставки

    уведомления. При необходимости технической поддержки, связанной с материнской платой, посетите веб-сайт и найдите на нем информацию о модели используемой вами материнской платы. На веб-сайте ASRock также можно найти самый последний перечень поддерживаемых VGA-карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки...
  • Seite 104: Технические Характеристики

    * Максимальная поддерживаемая частота памяти зависит от типа процессора. * Дополнительная информация представлена в Списке совместимой памяти (Memory Support List ) на веб-сайте ASRock. (http://www.asrock.com/) • Максимальный объем ОЗУ: 256 ГБ • Поддерживается Intel® Extreme Memory Profile (XMP) 2.0 • Позолоченные (15 мкм) контакты слотов DIMM Слоты...
  • Seite 105 • 7.1-канальный звук высокой четкости HD Audio с защитой данных (аудиокодек Realtek ALC1220) • Поддержка Premium Blu-ray Audio • Защита от перенапряжения (ASRock Full Spike Protection) • Поддержка Purity Sound - Конденсаторы для аудиосистем серии Nichicon Fine Gold - 120 дБ SNR DAC с дифференциальным усилителем...
  • Seite 106 • Разъемы HD Audio: тыловые АС / центральная АС / сабвуфер / линейный вход / фронтальные АС / микрофон (позолоченные контакты) • 8 порта SATA3 со скоростью передачи данных 6,0 Гбит/с, Запоминающие поддержка RAID (RAID 0, RAID 1, RAID 5, RAID 10, устройства...
  • Seite 107 X299 Steel Legend * Для разъемов CPU_FAN2/WP и CHA_FAN1~5/ WP автоматически определяется тип подключенного вентилятора: 3- или 4-контактный. • 1 24-контактных разъем питания ATX (Высокоплотный разъем питания) • 2 8-контактных разъема питания 12 В (Высокоплотный разъем питания) • 1 аудиоразъем для передней панели (позолоченные...
  • Seite 108 * С дополнительной информацией об изделии можно ознакомиться на веб-сайте: http://www.asrock.com Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона независимых производителей, сопряжен с определенным риском. Разгон процессора может снизить стабильность системы или даже привести к повреждению ее компонентов и...
  • Seite 109 X299 Steel Legend 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». На рисунке показана 3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на них перемычки- колпачка.
  • Seite 110 1.4 Колодки и разъемы, расположенные на системной плате Расположенные на системной плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое повреждение системной платы. Колодка системной Подключите...
  • Seite 111 X299 Steel Legend Колодка светодиодного Предназначена для SPEAKER DUMMY индикатора питания и подключения светодиодного DUMMY динамика корпуса индикатора питания и (7-контактная, SPK_ динамика корпуса. PLED1) PLED+ (см. стр. 1, № 22) PLED+ PLED- Разъемы Serial ATA3 Эти шесть восемь SATA3 (SATA3_0_1: предназначены...
  • Seite 112 Колодки USB 3.2 Gen1 На материнской плате Dummy IntA_PA_D+ (19-контактная, имеется одна колодка. IntA_PB_D+ IntA_PA_D- IntA_PB_D- USB3_4_5) Эта колодка USB 3.2 IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- (см. стр. 1, № 15) Gen1 поддерживает IntA_PB_SSTX- IntA_PA_SSRX+ два порта. IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- Vbus Колодка для порта На...
  • Seite 113 X299 Steel Legend Разъемы для вентилятора Данная системная плата оснащена пятью или помпы водяного 4-контактными разъемами охлаждения корпуса вентиляторов для системы (4-контактный CHA_ водяного охлаждения FAN_VOLTAGE FAN1/WP) CHA_FAN_SPEED корпуса. 3-контактную (см. стр. 1,№ 34) FAN_SPEED_CONTROL систему водяного (4-контактный CHA_ охлаждения корпуса...
  • Seite 114 Разъем питания АТХ 12 В Эта материнская плата снабжена двумя (8-контактов, ATX12V1) 8-контактными разъемами (см. стр. 1, № 3) питания АТХ 12 В. Чтобы (8 контактов, ATX12V2) использовать 4-контактный (см. стр. 1, № 4) разъем питания ATX, подключите его вдоль контакта...
  • Seite 115 X299 Steel Legend Колодки для Эти две колодки для подключения RGB-подсветки служат для 12V G R светодиодной подключения удлинительного RGB-подсветки. кабеля светодиодной (4-контактный, RGB-подсветки, которая RGB_HEADER1) позволяет реализовать (см. стр. 1, № 30) различные световые (4-контактный, эффекты. Внимание! Категорически RGB_HEADER2) запрещается...
  • Seite 116 Колодка для Этот разъем поддерживает виртуального RAID- виртуальный RAID-контроллер контроллера на ЦП Intel® на ЦП и RAID-контроллер +3VSB (4 контактов, VROC1) NVME/AHCI на шине PCIE ЦП. VROC RAID KEY (см. стр. 1, № 14) Благодаря использованию технологии Intel VROC поддерживаются три режима работы: Требуется...
  • Seite 117 X299 Steel Legend 1.5 Электронный переключатель Данная системная плата оснащена смарт-переключателем: Кнопка сброса настроек CMOS предназначена для быстрого обнуления значений CMOS. Кнопка сброса настроек Кнопка сброса настроек CMOS CMOS предназначена для быстрого (CLRCBTN1) обнуления значений CMOS. (См. стр. 3, № 14) Эта...
  • Seite 118: Conteúdo Da Embalagem

    Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando. Você também poderá encontrar a lista de placas VGA e CPU mais recentes suportadas no site da ASRock. Site da ASRock http://www.asrock.com.
  • Seite 119 * Por favor, consulte a Lista de Suporte de Memória no site da ASRock para obter mais informação. (http://www.asrock.com/) • Capacidade máxima da memória do sistema: 256GB • Suporta Extreme Memory Profile (XMP) 2.0 da Intel®...
  • Seite 120 • Áudio HD de 7.1 canais com proteção de conteúdo (Codec de áudio Realtek ALC1220) • Suporte áudio Blu-ray superior • Suporta proteção contra sobretensão (Proteção Total Contra Picos ASRock) • Suporta Purity Sound - Capacitor de Áudio Série Ouro Fino Nichicon - 120dB SNR DAC com amplificador diferencial - Fone de Ouvido NE5532 Premium para - Conector de Áudio do Painel frontal (suporta fones de ouvido de até...
  • Seite 121 X299 Steel Legend • Fichas de áudio HD: Alto-falante posterior / Central / Graves / Entrada de linha / Alto-falante frontal / Microfone( Entradas de Áudio Gold) Armazenamento • 8 x Conectores SATA3 6,0 Gb/s, suportaRAID (RAID 0, RAID 1, RAID 5, RAID 10, • Tecnologia de Armazenamento Rápido Intel®...
  • Seite 122 * CPU_FAN2/WP, CHA_FAN1~5/WP pode detectar automaticamente se o ventilador de 3 pinos ou 4 pinos está em uso. • 1 x Conector de energia 24-pinos ATX (Conector de energia de alta densidade) • 2 x Conectores de energia 8-pinos 12V (Conector de energia de alta densidade) • 1 x Conector de áudio de painel frontal (Conector de Áudio de Outro 15μ)
  • Seite 123 X299 Steel Legend * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros.
  • Seite 124 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". A imagem mostra um jumper de 3 pinos cujos pino1 e pino2 estão "Curtos"...
  • Seite 125 X299 Steel Legend 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores. Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe.
  • Seite 126 LED de alimentação e Conecte o LED de SPEAKER DUMMY Cabeçote de Autofalante alimentação do chassi e o DUMMY (SPK_PLED1 de 7 pinos) autofalante do chassi a este (ver p.1, N.º 22) cabeçote. PLED+ PLED+ PLED- Conectores série ATA3 Estes oito conectores SATA3 (SATA3_0_1: suportam cabos de dados ver p.1, N.º...
  • Seite 127 X299 Steel Legend Plataforma USB 3.2 Gen1 Há um cabeçote nesta Dummy IntA_PA_D+ (USB3_4_5 de 19 pinos) placa-mãe. Este suporte IntA_PB_D+ IntA_PA_D- IntA_PB_D- (ver p.1, N.º 15) USB 3.2 Gen1 pode IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- suportar duas portas. IntA_PB_SSTX- IntA_PA_SSRX+ IntA_PB_SSRX+...
  • Seite 128 Conectores de chassi e Esta placa mãe fornece ventoinha de bomba de conectores de ventoinha água chassi com cinco 4-Pin de FAN_VOLTAGE CHA_FAN_SPEED (CHA_FAN1/WP de resfriamento a água. Se FAN_SPEED_CONTROL 4 pinos) você pretende conectar um (ver p.1, N.º 34) ventilador de refrigeração a (CHA_FAN2/WP de água de chassis de 3 pinos,...
  • Seite 129 X299 Steel Legend Conector de alimentação Esta placa-mãe inclui dois de 12V ATX conectores de alimentação (ATX12V1 de 8 pinos) de 12V ATX de 8 pinos. (ver p.1, N.º 3) Para utilizar uma fonte de (ATX12V2 de 8 pinos) alimentação ATX de 4 pinos, (ver p.1, N.º...
  • Seite 130 Cabeçotes de LED RGB Estes dois cabeçotes RGB são (RGB_HEADER1 de usados para conectar o cabo 12V G R 4 pinos) de extensão de LED RGB (ver p.1, N.º 30) que permite aos usuários (RGB_HEADER2 de escolher entre vários efeitos de 4 pinos) iluminação LED.
  • Seite 131 X299 Steel Legend RAID Virtual no cabeçote Este conector suporta Intel® da CPU Virtual RAID na CPU e RAID (VROC1 de 4 pinos) NVME/AHCI na CPU PCIE. +3VSB (ver p.1, N.º 14) VROC RAID KEY Com a introdução do produto Intel VROC, existem três modos de operação: Requer uma chave HW Principais Recursos • Pasagem apenas (sem RAID)
  • Seite 132 1.5 Chave inteligente A placa mãe em uma chave inteligente: Limpar Botão CMOS, permitindo que os usuários limpem rapidamente os valores CMOS. Botão Limpar CMOS O Botão Limpar CMOS permite aos (CLRCBTN1) usuários apagar os valores CMOS (ver p.3, N.º 14) rapidamente.
  • Seite 133: Zawartość Opakowania

    X299 Steel Legend 1 Wprowadzenie Dziękujemy za zakupienie płyty głównej ASRock X299 Steel Legend, niezawodnej płyty głównej produkowanej z konsekwentnie wykonywaną przez firmę ASRock, rygorystyczną kontrolą jakości. Płyta ta zapewnia doskonałą jakość działania i solidną konstrukcję, spełniającą zobowiązanie firmy ASRock do dostarczania produktów o wysokiej jakości i wytrzymałości.
  • Seite 134 2933(OC)/2800(OC)/2666/2400/2133 non-ECC * Maksymalna obsługiwana częstotliwość pamięci zależy od typu procesora. * Sprawdź listę obsługiwanej pamięci na stronie internetowej ASRock w celu uzyskania dalszych informacji. (http://www.asrock.com/) • Maks. wielkość pamięci systemowej: 256GB • Obsługa Intel® Extreme Memory Profile (XMP) 2.0 • 15μ...
  • Seite 135 Audio • Audio HD 7.1 CH z zabezpieczeniem treści (Kodek audio Realtek ALC1220) • Obsługa audio Blu-ray Premium • Obsługa zabezpieczenia przed udarami (pełna ochrona ASRock przed impulsami) • Obsługa Purity Sound - Nichicon Fine Gold Series Audio Caps - 120dB SNR DAC ze wzmacniaczem różnicowym - NE5532 wzmacniacz słuchawkowy klasy Premium dla złącza...
  • Seite 136 • Gniazda audio HD: Głośnik tylny / Centralny / Basy / Wejście liniowe / Głośnik przedni / Mikrofon (Pozłacane gniazda audio) Przechowywanie • 8 x złącza SATA3 6,0 Gb/s, obsługa RAID (RAID 0, RAID 1, RAID 5 i RAID 10, • Intel Rapid Storage Technology 17), NCQ, AHCI i Hot Plug* * Jeśli gniazdo M2_1 jest zajęte przez urządzenie M.2 typu SATA, zostanie wyłączone SATA3_1.
  • Seite 137 X299 Steel Legend * CPU_FAN2/WP i CHA_FAN1~5/WP może automatycznie wykrywać, jeśli używany jest wentylator 3-pinowy lub 4-pinowy. • 1 x 24 pinowe złącze zasilania ATX (Złącze zasilania Hi-Density) • 2 x 8 pinowe 12V złącza zasilania (Złącze zasilania Hi-Density) • 1 x złącze audio na panelu przednim (15μ pozłacane złącze audio) • 1 x złącze Thunderbolt AIC (5-pinowe)
  • Seite 138 * Dla uzyskania szczegółowej informacji o produkcie, należy odwiedzić naszą stronę internetową: http://www.asrock.com Należy pamiętać, że przetaktowywanie jest związane z pewnym ryzykiem, włącznie z regulacją ustawień w BIOS, zastosowaniem Untied Overclocking Technology lub używaniem narzędzi przetaktowywania innych firm. Przetaktowywanie może wpływać na stabilność systemu lub nawet powodować...
  • Seite 139 X299 Steel Legend 1.3 Ustawienia zworek Ta ilustracja pokazuje ustawienia zworek. Po umieszczeniu nasadki zworki na pinach, zworka jest “Zwarta”. Jeśli nasadka zworki nie jest umieszczona na pinach, zworka jest “Otwarta”. Ta ilustracja pokazuje 3-pinową zworkę, której pin1 i pin2 są “Zwarte”, a nasadka zworki jest umieszczona na tych 2 pinach.
  • Seite 140 1.4 Wbudowane złącza główkowe i inne złącza Wbudowane złącza główkowe i inne złącza są bezzworkowe. NIE należy umieszczać zworek nad tymi złączami główkowymi i złączami. Umieszczanie zworek nad złączami główkowymi i złączami spowoduje trwałe uszkodzenie płyty głównej. Złącze główkowe na Do tego złącza główkowego PLED+ PLED-...
  • Seite 141 X299 Steel Legend Dioda LED zasilania i Podłącz to tego złącza SPEAKER DUMMY złącze główkowe głośnika główkowego diodę LED DUMMY (7-pinowe SPK_PLED1) zasilania obudowy i głośnik (sprawdź s.1, Nr 22) obudowy . PLED+ PLED+ PLED- Złącza Serial ATA3 Te osiem złączy SATA3 (SATA3_0_1: obsługuje kable danych SATA...
  • Seite 142 Złącza główkowe USB 3.2 Na tej płycie głównej Dummy IntA_PA_D+ Gen1 znajduje się jedno złącze IntA_PB_D+ IntA_PA_D- IntA_PB_D- (19-pinowe USB3_4_5) główkowe. To złącze IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- (sprawdź s.1, Nr 15) główkowe USB 3.2 Gen1 IntA_PB_SSTX- IntA_PA_SSRX+ może obsługiwać dwa IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- porty.
  • Seite 143 X299 Steel Legend Złącza wentylatora pompy Ta płyta główna udostępnia pięć 4-pinowych złączy wodnej obudowy wentylatora obudowy (4-pinowe CHA_FAN1/ FAN_VOLTAGE chłodzenia wodnego. Jeśli CHA_FAN_SPEED planowane jest podłączenie FAN_SPEED_CONTROL (sprawdź s.1, Nr 34) 3-pinowego wentylatora (4-pinowe CHA_FAN2/ chłodzenia wodnego obudowy, należy je podłączyć...
  • Seite 144 Złącza zasilania ATX 12V Ta płyta główna udostępnia (8-pinowe ATX12V1) dwa 8-pinowe złącza zasilania (sprawdź s.1, Nr 3) ATX 12V. W celu użycia (8-pinowe ATX12V2) 4-pinowego zasilacza ATX, (sprawdź s.1, Nr 4) należy podłączyć je wzdłuż pinu 1 i pinu 5. *Ostrzeżenie: Upewnij się, że podłączony kabel zasilający jest przeznaczony do CPU,...
  • Seite 145 X299 Steel Legend Złącza główkowe LED Te złącza główkowe RGB są używane do podłączenia 12V G R (4-pinowe RGB_ przedłużacza LED RGB, który HEADER1) umożliwia użytkownikom (sprawdź s.1, Nr 30) wybór spośród różnych efektów (4-pinowe RGB_ światła LED. HEADER2) Ostrzeżenie: Nigdy nie należy instalować...
  • Seite 146 Wirtualne złącze RAID To złącze obsługuje wirtualne na główkowym złączu złącze RAID Intel® na procesorze procesora i NVME/AHCI RAID na +3VSB (4-pinowe VROC1) połączeniu CPU PCIE. VROC RAID KEY (sprawdź s.1, Nr 14) Wprowadzenie produktu Intel VROC, udostępniło trzy tryby operacji: Wymagany klucz HW Funkcje klucza • Wyłącznie przelotowe (bez RAID)
  • Seite 147 X299 Steel Legend 1.5 Inteligentny przełącznik Ta płyta główna ma jeden inteligentny przełącznik: Przycisk usuwania pamięci CMOS, umożliwia użytkownikom szybkie usuwanie wartości CMOS. Przyciski usuwania Przyciski usuwania pamięci CMOS pamięci CMOS umożliwiają użytkownikom szybkie (CLRCBTN1) usunięcie wartości CMOS. (sprawdź p.3, Nr 14)
  • Seite 148 1 개요 ASRock X299 Steel Legend 마더보드를 구입해 주셔서 감사합니다 . 이 마더보드는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성이 우수합니다 . 품질과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의 내...
  • Seite 149 (OC)/3200(OC)/2933(OC)/2800(OC)/2666/2400/2133 비 ECC, 비버퍼링 메모리 지원 * 지원되는 메모리 주파수는 프로세서 종류에 따라 다를 수 있습니다 . * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목록을 참조하십시오 . (http://www.asrock.com/) • 시스템 메모리 최대 용량 : 256GB ® • Intel Extreme Memory Pro le (XMP) 2.0 지원...
  • Seite 150 • 콘텐츠 보호를 이용한 7.1 CH HD 오디오 지원 (Realtek 오디오 ALC1220 오디오 코덱 ) • 프리미엄 Blu-ray 오디오 지원 • 서지 보호 지원 (ASRock 풀 스파이크 보호 ) • Purity Sound 4 지원 - Nichicon Fine Gold 시리즈 오디오 캡...
  • Seite 151 X299 Steel Legend • HD 오디오 잭 : 후면 스피커 / 중앙 / 베이스 / 라인 입력 / 전면 스피커 / 마이크 ( 골드 오디오 잭 ) • SATA3 6.0 Gb/s 커넥터 8 개가 RAID(RAID 0, RAID 1, RAID 5, 저장...
  • Seite 152 * 3 핀 또는 4 핀 팬이 사용 중인 경우 , CPU_FAN2/WP 과 CHA_FAN1~5/WP 가 자동으로 감지할 수 있습니다 . • 24 핀 ATX 전원 커넥터 1 개 ( 고밀도 전원 커넥터 ) • 8 핀 12V 전원 커넥터 2 개 ( 고밀도 전원 커넥터 ) • 전면...
  • Seite 153 X299 Steel Legend * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오버클 로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른다는 것을 유념하십시오 . 오버클로킹은 시스템 안정성에 영향을 주거나 심지어 시스템의 구성 요소...
  • Seite 154 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . 그림은 3 핀 점퍼를 보 여주며 핀 1 과 핀 2 는 점퍼 캡을 씌울 때 “단락”됩니다 . Clear CMOS 점퍼...
  • Seite 155 X299 Steel Legend 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩 니다 . 섀시의 전원 버튼 , 리셋 시스템 패널 헤더...
  • Seite 156 전원 LED 및 스피커 헤더 SPEAKER 섀시 전원 LED 와 섀시 DUMMY (7 핀 SPK_PLED1) 스피커를 이 헤더에 DUMMY (1 페이지 , 22 번 항목 연결하십시오 . 참조 ) PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 8 개의 SATA3 커넥터는 (SATA3_0_1: 최대...
  • Seite 157 X299 Steel Legend USB 3.2 Gen1 헤더 이 마더보드에는 하나의 Dummy IntA_PA_D+ (19 핀 USB3_4_5) 헤더가 있습니다 . 이 IntA_PB_D+ IntA_PA_D- IntA_PB_D- (1 페이지 , 15 번 항목 USB 3.2 Gen1 헤더는 IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- 참조 ) 포트 2 개를 지원할 수...
  • Seite 158 이 마더보드에는 4 핀 섀시 워터 펌프 팬 커넥터 수냉식 섀시 팬 커넥터 (4 핀 CHA_FAN1/WP) 5 개가 탑재되어 있습니다 . FAN_VOLTAGE (1 페이지 , 34 번 항목 3 핀 CPU 섀시 수냉식 쿨러 CHA_FAN_SPEED 참조 ) 팬을 연결하려는 경우 핀 FAN_SPEED_CONTROL (4 핀...
  • Seite 159 X299 Steel Legend ATX 12V 전원 커넥터 이 마더보드에는 8 핀 (8 핀 ATX12V1) ATX 12V 전원 커넥터 두 (1 페이지 , 3 번 항목 개가 탑재되어 있습니다 . 참조 ) 4 핀 ATX 전원공급장치를 (8 핀 ATX12V2) 사용하려면 핀 1 과 핀 5 을...
  • Seite 160 RGB LED 헤더 이 2 개의 RGB 헤더는 다양한 (4 핀 RGB_HEADER1) LED 조명 효과를 선택할 수 12V G R (1 페이지 , 30 번 항목 있는 RGB LED 연장 케이블을 참조 ) 연결하는 데 사용됩니다 . (4 핀 RGB_HEADER2) 주의...
  • Seite 161 X299 Steel Legend 가상 RAID On CPU 헤더 이 커넥터는 Intel® 가상 RAID on (4 핀 VROC1) CPU 와 NVME/AHCI RAID on (1 페이지 , 14 번 항목 CPU PCIE 를 지원합니다 . +3VSB 참조 ) VROC RAID KEY Intel VROC 제품의 도입으로 다음과 같은 세 가지 작동 모드를 사용할 수 있습니다 .
  • Seite 162 1.5 스마트 스위치 마더보드에는 하나의 스마트 스위치가 있습니다 : Clear CMOS 버튼으로 CMOS 값을 빨리 지울 수 있습니다 . CMOS 소거 버튼 Clear CMOS 버튼으로 CMOS 값을 (CLRCBTN1) 빨리 지울 수 있습니다 . (3 페이지 , 14 번 항목 참 조...
  • Seite 163 ご使用のモデルについての詳細情報を、 当社のウェブサイトで参照ください。 ASRock のウェブサイトでは、 最新の VGA カードおよび CPU サポート一覧もご覧になれます。 ASRock ウェブサイト http://www.asrock.com. 1.1 パッケージの内容 • ASRock X299 Steel Legend マザーボード (ATX フォームファクタ) • ASRock X299 Steel Legend クイックインストールガイド • ASRock X299 Steel Legend サポート CD • 1 x I/O パネルシールド...
  • Seite 164 • 8 x DDR4 DIMM スロッ ト • DDR4 4200+(OC)*/4000(OC)/3800(OC)/3733(OC)/3600 (OC)/3200(OC)/2933(OC)/2800(OC)/2666/2400/2133 ノン ECC、 アンバッファードメモリに対応 * 対応する最大メモリ周波数は、 プロセッサタイプにより 異なる場合があります。 * 詳細については、 ASRock ウェブサイトのメモリーサポート 一覧を参照してください。 (http://www.asrock.com/) • システムメモリの最大容量 : 256GB • Intel® エクストリームメモリプロファイル (XMP) 2.0 に対応 • DIMM スロッ トに 15 μゴールドコンタク トを採用 拡張スロッ ト...
  • Seite 165 X299 Steel Legend • 1 x M.2 ソケッ ト ( キー E)、 タイプ 2230 WiFi/BT モジュールに 対応 • VGA PCIe スロッ トに 15 μ ゴールドコンタク トを採用 (PCIE1 と PCIE3) オーディオ • 7.1 CH HD オーディオ、 コンテンツプロテクション付き (Realtek ALC1220 オーディオコーデック) • プレミアム ・ ブルーレイ ・ オーディオ ・ サポート...
  • Seite 166 • HD オーディオジャック : リアスピーカー / センター / バス / ラインイン / フロントスピーカー / マイク (ゴールドオーディオ ジャック) ストレージ • 8 x SATA3 6.0 Gb/s コネクタ、 RAID (RAID 0、 RAID 1、 RAID 5、 RAID 10、 • Intel ラピッ ド ・ ストレージテク ノロジー 17 および Intel スマート ・ レスポンステク...
  • Seite 167 X299 Steel Legend * CPU_FAN2/WP および CHA_FAN1 ∼ 5/WP は 3 ピンまたは 4 ピンファンが使用されているかどうかを自動検出できます。 • 1 x 24 ピン ATX 電源コネクターコネクタ (高密度電源コネクター) • 2 x 8 ピン 12V 電源コネクタ (高密度電源コネクタ) • 1 x フロントパネルオーディオコネクタ (15 μ ゴールドオーディオ ジャック ) • 1 x Thunderbolt AIC コネクタ (5 ピン ) *Thunderbolt ™...
  • Seite 168 * 商品詳細については、 当社ウェブサイトをご覧ください。 http://www.asrock.com BIOS 設定の調整、 アンタイドオーバークロックテク ノロジーの適用、 サードパーティの オーバークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴い ますのでご注意ください。 オーバークロックするとシステムが不安定になったり、 システムの コンポーネントやデバイスが破損することがあります。 ご自分の責任で行ってください。 弊社では、 オーバークロックによる破損の責任は負いかねますのでご了承ください。...
  • Seite 169 X299 Steel Legend 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピンに 被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さってい ない場合には、 ジャンパーは 「オープン」 です。 この図は 3 ピンのジャンパーを表し、 ジャ ンパーキャップがピン 1 とピン 2 に被さっているとき、 これらのピンは 「ショート」 です。 CMOS クリアジャンパー (CLRMOS1) デフォルト CMOS のクリア (p.1、 No. 26 参照) CLRMOS1 を使って CMOS 内のデータをクリアできます。 クリアして、 デフォルト...
  • Seite 170 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタ にはジャンパーキャップを被せないでください。 ヘッダーおよびコネクタにジャンパー キャップを被せると、 マザーボードに物理損傷が起こることがあります。 システムパネルヘッダー 電源ボタンを接続し、 ボタンを PLED+ PLED- (9 ピン PANEL1) リセッ トし、 下記のピン割り PWRBTN# (p.1、 No. 23 参照) 当てに従って、 シャーシの システムステータス表示ランプ をこのヘッダーにセッ トします。 RESET# HDLED- ケーブルを接続するときには、 HDLED+ ピンの+と−に気をつけて ください。 PWRBTN (電源ボタン) : シャーシ前面パネルの電源ボタンに接続してください。 電源ボタンを使用して、 システムをオフにする方法を設定できます。...
  • Seite 171 X299 Steel Legend 電源 LED とスピーカー シャーシ電源 LED と SPEAKER ヘッダー DUMMY シャーシスピーカーをこの DUMMY (7 ピン SPK_PLED1) ヘッダーに接続して (p.1、 No. 22 参照) ください。 PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら 8 つの SATA3 コネクタは最高 6.0Gb/s の (SATA3_0_1: p.1、 No. 16 参照)...
  • Seite 172 USB 3.2 Gen1 ヘッダー このマザーボードには Dummy IntA_PA_D+ (19 ピン USB3_4_5) 1 つのヘッダーが装備さ IntA_PB_D+ IntA_PA_D- IntA_PB_D- (p.1、 No. 15 参照) れています。 この USB 3.2 IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- Gen1 ヘッダーは、 2 つの IntA_PB_SSTX- IntA_PA_SSRX+ ポートをサポートできます。 IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- Vbus フロントパネルタイプ C このマザーボード上には、 USB 3.2 Gen1 ヘッダー...
  • Seite 173 X299 Steel Legend シャーシウォーター このマザーボードには、 ポンプファンコネクタ 4 ピン水冷シャーシが (4 ピン CHA_FAN1/WP) コネクタ用に装備されて FAN_VOLTAGE (p.1、 No. 34 参照) います。 3 ピンのシャーシ CHA_FAN_SPEED FAN_SPEED_CONTROL (4 ピン CHA_FAN2/WP) 水冷却ファンを接続する (p.1、 No. 20 参照) 場合には、 ピン 1-3 に接続 してください。 (4 ピン CHA_FAN3/WP) FAN_VOLTAGE (p.1、 No. 24 参照)...
  • Seite 174 ATX 12V 電源コネクタ このマザーボードには、 2 個 (8 ピン ATX12V1) の 8 ピン ATX 12V 電源 (p.1、 No. 3 参照) コネクタが装備されてい (8 ピン ATX12V2) ます。 4 ピンの ATX 電源を (p.1、 No. 4 参照) 使用するには、 ピン 1 と 5 に 合わせて接続してください。 * 警告 : 接続されている電源 ケーブルが、...
  • Seite 175 X299 Steel Legend RGB LED ヘッダー これら 2 つの RGB ヘッダー (4 ピン RGB_HEADER1) を使用して RGB LED 延長 12V G R (p.1、 No. 30 参照) ケーブルを接続すれば、 (4 ピン RGB_HEADER2) ユーザーはさまざまな LED (p.1、 No. 9 参照) ライティング効果を選択 できます。 注意 : RGB LED ケーブルは...
  • Seite 176 CPU ヘッダー上の仮想 このコネクタは、 CPU 上の Intel® 仮想 RAID および CPU PCIE RAID (4 ピン VROC1) 上の NVME/AHCI RAID に対応 +3VSB (p.1、 No. 14 参照) します。 VROC RAID KEY Intel VROC 製品の導入には、 次の 3 つの動作モードがあります : 必要な HW キー 主な機能 • パススルーのみ ( 非 RAID) •...
  • Seite 177 X299 Steel Legend 1.5 スマートスイッチ このマザーボードには 1 つのスマートスイッチが装備されています : クリア CMOS ボタンで、 CMOS 値を素早く クリアできます。 クリア CMOS ボタン クリア CMOS ボタンで、 CMOS 値を 素早く クリアできます。 (CLRCBTN1) (p.3、 No. 14 を参照して ください) この機能が動作するのは、 コンピュータの電源をオフにして、 電源供給を切断した場合 だけです。...
  • Seite 178 恕不另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上, 我们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的 网站以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 X299 Steel Legend 主板(ATX 规格尺寸) • 华擎 X299 Steel Legend 快速安装指南 • 华擎 X299 Steel Legend 支持光盘 • 1 x I/O 面板 • 1 x 华擎 SLI_HB_Bridge_2S 卡(选购)...
  • Seite 179 X299 Steel Legend 1.2 规格 平台 • ATX 规格尺寸 • 支持用于 LGA 2066 插槽的 Intel® Core X 系列处理器 (Cascade Lake-X、Skylake X Refresh 和 Skylake X) • Digi Power design • 11 电源相设计 • 支持 Intel® Turbo Boost Max Technology 3.0 芯片集...
  • Seite 180 • 1 x M.2 Socket (Key E),支持类型 2230 WiFi/BT 模块 • VGA PCIe 插槽 (PCIE1 和 PCIE3) 中 15 μ 金触点 音频 • 具有内容保护功能的 7.1 CH 高清音频(Realtek ALC1220 音频编解码器) • 优质 Blu-ray 音频支持 • 支持电涌保护(华擎全防护) • 支持 Purity Sound - Nichicon Fine Gold 系列音频电容 - 120dB SNR DAC,带微分放大器...
  • Seite 181 X299 Steel Legend • 高清音频插孔 : 后扬声器 / 中央 / 低音 / 线路输入 / 前扬声器 / 麦克风 ( 金色音频插孔 ) 存储 • 8 x SATA3 6.0 Gb/s 接口,支持 RAID (RAID 0、RAID 1、 RAID 5、RAID 10、 • Intel Rapid Storage Technology 17 和 Intel Smart Response Technology)、NCQ、AHCI 和热插拔...
  • Seite 182 * CPU_FAN2/WP 和 CHA_FAN1~5/WP 可以自动检测 3 针脚或 4 针脚风扇是否在使用。 • 1 x 24 针 ATX 电源接口(高密度电源接口) • 2 x 8 针 12V 电源接口(高密度电源接口) • 1 x 前面板音频接口 (15 μ 金色音频接口 ) • 1 x Thunderbolt AIC 接口 (5 针 ) * Thunderbolt ™...
  • Seite 183 X299 Steel Legend * 有关详细产品信息,请访问我们的网站: http://www.asrock.com 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用 第三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成 损坏。执行这项工作您应自担风险和费用。我们对由于超频而造成的损坏概不负责。...
  • Seite 184 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这些 针脚上没有装跳线帽,跳线“开路”。此图显示 3 针跳线,当跳线帽装在针脚 1 和 针脚 2 上,它们“短接”。 清除 CMOS 跳线 (CLRMOS1) 默认 清除 CMOS (见第 1 页,第 26 个) CLRMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设置,请 关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRMOS1 上的针脚 2 和针脚 3 短接 5 秒。但是,请勿在更新 BIOS 后立即清除 CMOS。如果 您需要在刚完成...
  • Seite 185 X299 Steel Legend 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装到这些 接脚和接口上将会对主板造成永久性损坏。 系统面板接头 按照下面的针脚分配,将 PLED+ PLED- PWRBTN# (9 针 PANEL1) 机箱上的电源按钮、重置 (见第 1 页,第 23 个) 按钮和系统状态指示灯连接 到此接脚。在连接线缆前 RESET# 请记下正负针脚。 HDLED- HDLED+ PWRBTN(电源按钮): 连接到机箱前面板上的电源按钮。您可以配置使用电源按钮关闭系统的方式。 RESET(重置按钮): 连接到机箱前面板上的重置按钮。如果计算机死机,无法执行正常重新启动, 按重置按钮重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。 系统处在 S1/S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,...
  • Seite 186 SPEAKER 电源 LED 和扬声器接脚 请将机箱电源 LED 和机箱 DUMMY (7 针 SPK_PLED1) 扬声器连接到此接脚。 DUMMY (见第 1 页,第 22 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这八个 SATA3 接口支持最高 (SATA3_0_1: 6.0 Gb/s 数据传输速率的内部 见第 1 页,第 16 个) 存储设备的 SATA 数据线。 (SATA3_2_3: * 如果...
  • Seite 187 X299 Steel Legend USB 3.2 Gen1 接脚 此主板上有一个接脚。 Dummy IntA_PA_D+ (19 针 USB3_4_5) 此 USB 3.2 Gen1 接脚 IntA_PB_D+ IntA_PA_D- IntA_PB_D- (见第 1 页,第 15 个) 可以支持两个端口。 IntA_PA_SSTX+ IntA_PB_SSTX+ IntA_PA_SSTX- IntA_PB_SSTX- IntA_PA_SSRX+ IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- Vbus 前面板类型 C USB 3.2 此主板上有一个前面板...
  • Seite 188 机箱水泵风扇接口 此主板提供五个 4 针水冷 (4 针 CHA_FAN1/WP) 机箱风扇接口。如果您打算 (见第 1 页,第 34 个) FAN_VOLTAGE 连接 3 针机箱水冷风扇, CHA_FAN_SPEED (4 针 CHA_FAN2/WP) 请将它连接到针脚 1-3。 FAN_SPEED_CONTROL (见第 1 页,第 20 个) (4 针 CHA_FAN3/WP) FAN_VOLTAGE (见第 1 页,第 24 个) CHA_FAN_SPEED FAN_SPEED_CONTROL (4 针...
  • Seite 189 X299 Steel Legend ATX 12V 电源接口 此主板提供两个 8 针 ATX (8 针 ATX12V1) 12V 电源接口。要使用 4 针 (见第 1 页,第 3 个) ATX 电源,请沿针脚 1 和 (8 针 ATX12V2) 针脚 5 插接它。 (见第 1 页,第 4 个) * 警告 : 请确保连接的电源线...
  • Seite 190 RGB LED 接脚 这两个 RGB 接脚用于连接 (4 针 RGB_HEADER1) RGB LED 延长线,可让用户 12V G R (见第 1 页,第 30 个) 选择不同的 LED 灯光效果。 (4 针 RGB_HEADER2) 注意: RGB LED 线安装方向 (见第 1 页,第 9 个) 切勿错误,否则,线缆会 损坏。 * 请参考第 38 页了解这个 接脚的详情。...
  • Seite 191 X299 Steel Legend CPU 接脚上虚拟 RAID 此接口支持 CPU 上 Intel 虚拟 (4- 针 VROC1) RAID 和 CPU PCIE 上 NVME/ (见第 1 页,第 14 个) AHCI RAID。 +3VSB VROC RAID KEY 加入 Intel VROC 产品,有三种模式的操作 : 需要硬件密钥 密钥功能 • 仅直通 ( 无 RAID) •...
  • Seite 192 1.5 智能开关 此主板配有 1 个智能开关: 清除 CMOS 按钮,允许用户快速清除 CMOS 值。 清除 CMOS 按钮 清除 CMOS 按钮允许用户快速清除 (CLRCBTN1) CMOS 值。 (见第 3 页,第 14 个) 只有在关闭计算机并拔下电源插头后,才能使用此功能。...
  • Seite 193 X299 Steel Legend 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O:表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定...
  • Seite 194 若您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定 資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站 http://www.asrock.com。 1.1 包裝內容 • 華擎 X299 Steel Legend 主機板(ATX 尺寸) • 華擎 X299 Steel Legend 快速安裝指南 • 華擎 X299 Steel Legend 支援光碟 • 1 x I/O 面板外罩 • 1 x 華擎 SLI_HB_Bridge_2S 卡(選用)...
  • Seite 195 X299 Steel Legend 1.2 規格 • ATX 尺寸 平台 • 支援適用於 LGA 2066 插槽的 Intel® Core X 系列處理器 (Cascade Lake-X、Skylake X Refresh 和 Skylake X) • Digi Power design • 11 電源相位設計 • 支援 Intel® Turbo Boost Max 技術 3.0 •...
  • Seite 196 • 1 x M.2 插座 (Key E),支援 Type 2230 WiFi/BT 模組 • VGA PCIe 插槽採用 15μ 特厚鍍金插槽(PCIE1 與 PCIE3) • 7.1 CH HD 音訊含內容保護(Realtek ALC1220 音訊轉碼器) 音訊 功能 • 高階藍光音訊支援 • 支援突波保護(華擎全防護) • 支援 Purity Sound 4 天籟美聲 - Nichicon Fine Gold 系列音響級電容 - 120dB SNR DAC 及差動放大器...
  • Seite 197 X299 Steel Legend • HD 音訊插孔: 後置喇叭 / 中置 / 低音 / 線路輸入 / 前置喇叭 / 麥克風(金色音訊插孔) • 提供 8 x SATA3 6.0 Gb/s 接頭,支援 RAID(RAID 0、RAID 1、 儲存裝置 RAID 5、RAID 10、 • Intel 快速儲存技術 17 及 Intel 智慧反應技術)、NCQ、AHCI 及熱插拔 * * 若...
  • Seite 198 * 如果 3-pin 或 4-pin 風扇使用中,可自動偵測 CPU_FAN2/WP 和 CHA_FAN1~5/WP。 • 1 x 24 pin ATX 電源連接埠(高密度電源連接埠) • 2 x 8 pin 12V 電源連接埠(高密度電源連接埠) • 1 x 前面板音訊接頭 (15μ 金色音訊接頭 ) • 1 x underbolt AIC 接頭 (5-pin) underbolt ™ AIC 卡安裝於支援的 PCIe 插槽 ( 視 CPU 類型 而定...
  • Seite 199 X299 Steel Legend * 如需產品詳細資訊,請上我們的網站: http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採用 自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性,或者 甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。我們對於 因超頻所造成的可能損害概不負責。...
  • Seite 200 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒有 跳線帽套在針腳上,該跳線為「開啟」。圖例顯示當 3-pin 跳線的跳線蓋套在 pin1 及 pin2 時,這兩個針腳皆為「短路」。 清除 CMOS 跳線 (CLRMOS1) (請參閱第 1 頁, 預設 清除 CMOS 編號 26) 您可利用 CLRMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設設定, 請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後,請使用跳線帽 讓 CLRMOS1 上的 pin2 及 pin3 短路約 5 秒。不過,請不要在更新 BIOS 後立即清除 CMOS。若您需在更新...
  • Seite 201 X299 Steel Legend 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在 排針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列將 PLED+ PLED- (9-pin PANEL1) PWRBTN# 機殼上的電源按鈕、重設 (請參閱第 1 頁, 按鈕及系統狀態指示燈連接 編號 23) 至此排針。在連接纜線之前 RESET# 請注意正負針腳。 HDLED- HDLED+ PWRBTN ( 電源按鈕 ): 連接至機殼前面板上的電源按鈕。您可設定使用電源按鈕關閉系統電源的方式。 RESET ( 重設按鈕 ): 接至機殼前面板上的重設按鈕。若電腦當機且無法執行正常重新啟動,按下重設 按鈕即可重新啟動電腦。 PLED ( 系統電源 LED):...
  • Seite 202 電源 LED 及喇叭排針 SPEAKER 請將機殼電源 LED 及機殼 DUMMY (7-pin SPK_PLED1) 喇叭連接至此排針。 DUMMY (請參閱第 1 頁,編號 22) PLED+ PLED+ PLED- Serial ATA3 接頭 這八組 SATA3 接頭皆支援 內部儲存裝置的 SATA 資料 (SATA3_0_1: 請參閱第 1 頁,編號 16) 纜線,最高可達 6.0 Gb/s (SATA3_2_3: 資料傳輸率。 請參閱第 1 頁,編號 17) * 若...
  • Seite 203 X299 Steel Legend USB 3.2 Gen1 排針 此主機板上有一個排針。 Dummy IntA_PA_D+ (19-pin USB3_4_5) 此 USB 3.2 Gen1 排針 IntA_PB_D+ IntA_PA_D- IntA_PB_D- (請參閱第 1 頁,編號 15) IntA_PA_SSTX+ 皆可支援兩個連接埠。 IntA_PB_SSTX+ IntA_PA_SSTX- IntA_PB_SSTX- IntA_PA_SSRX+ IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX- Vbus 前面板 C 類型 USB 3.2 Gen1 本主機板具有一個...
  • Seite 204 本主機板提供五個 4-Pin 機殼/水冷幫浦風扇接頭 FAN_VOLTAGE (4-pin CHA_FAN1/WP) 水冷機殼風扇接頭。若您 CHA_FAN_SPEED FAN_SPEED_CONTROL (請參閱第 1 頁,編號 34) 計畫連接 3-Pin 機殼水冷 (4-pin CHA_FAN2/WP) 風扇,請接至 Pin 1-3。 (請參閱第 1 頁,編號 20) (4-pin CHA_FAN3/WP) (請參閱第 1 頁,編號 24) FAN_VOLTAGE (4-pin CHA_FAN4/WP) CHA_FAN_SPEED FAN_SPEED_CONTROL (請參閱第 1 頁,編號 25) (4-pin CHA_FAN5/WP) (請參閱第...
  • Seite 205 X299 Steel Legend ATX 12V 電源接頭 本主機板配備兩組 8-pin (8-pin ATX12V1) ATX 12V 電源接頭。若要 (請參閱第 1 頁,編號 3) 使用 4-pin ATX 電源 (8-pin ATX12V2) 供應器,請插入 Pin 1 及 (請參閱第 1 頁,編號 4) Pin 5。 * 警告: 請確定已連接 CPU 的電源線,而非 顯示卡的電源線。請勿將 PCIe 電源線插入此接頭。...
  • Seite 206 RGB LED 排針 這兩個 RGB 排針用於連接 (4-pin RGB_HEADER1) RGB LED 延長線,可供 12V G R (請參閱第 1 頁,編號 30) 使用者選擇各種 LED 照明 (4-pin RGB_HEADER2) 效果。 (請參閱第 1 頁,編號 9) 警告: 切勿以錯誤方向 安裝 RGB LED 纜線,否則 纜線可能損壞。 * 關於這種排針的詳細 說明,請參閱第 38 頁。 可定址...
  • Seite 207 X299 Steel Legend Virtual RAID On CPU 排針 此接頭支援 Intel® Virtual (4-pin VROC1) RAID on CPU 及 NVME/ (請參閱第 1 頁,編號 14) AHCI RAID on CPU +3VSB PCIE。 VROC RAID KEY 導入 Intel VROC 產品後,共有三種操作模式: 需要硬體金鑰 主要功能 • 僅限直通(無 RAID)...
  • Seite 208 1.5 智慧型開關 主機板設有一個智慧型開關: 清除 CMOS 按鈕,讓使用者迅速清除 CMOS 值。 清除 CMOS 按鈕 清除 CMOS 按鈕可讓 (CLRCBTN1) 使用者迅速清除 CMOS 值。 (請參閱第 3 頁,編號 14) 此功能唯有在將電腦關機,拔下電源供應器的插頭時才會作用。...
  • Seite 209 2666/2400/2133 non-ECC, memori tanpa bufer * Frekuensi memori maksimum yang didukung dapat bervariasi berdasarkan jenis prosesor. * Lihat Daftar Dukungan Memori di situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) • Kapasitas maksimum memori sistem: 256GB • Mendukung Intel® Extreme Memory Profile (XMP) 2.0 • 15μ...
  • Seite 210 Audio • Audio HD 7.1 CH dengan Perlindungan Konten (Realtek ALC1220 Audio Codec) • Mendukung Audio Blu-ray Premium • Mendukung Perlindungan Lonjakan Arus (ASRock Full Spike Protection) • Mendukung Purity Sound - Nichicon Fine Gold Series Audio Caps - 120dB SNR DAC dengan Amplifier Diferensial...
  • Seite 211 X299 Steel Legend • Soket Audio HD: Speaker Belakang / Tengah / Bass / Saluran masuk / Speaker Depan / Mikrofon (Soket Audio Berwarna Emas) Penyimpanan • 8 Konektor SATA3 6,0 Gb/s, mendukung RAID (RAID 0, RAID 1, RAID 5, RAID 10, • Intel Rapid Storage Technology 17, dan Intel Smart Response...
  • Seite 212 * CPU_FAN2/WP dan CHA_FAN1~5/WP dapat mendeteksi otomatis jika kipas 3-pin atau 4-pin sedang digunakan. • 1 x Konektor Daya ATX 24 pin (Konektor Daya dengan Densitas Tinggi) • 2 x Konektor Daya 12V 8 pin (Konektor Daya Dengan Kerapatan Tinggi) • 1 x Konektor Audio Panel Depan (15μ...
  • Seite 213 X299 Steel Legend * Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan mengakibatkan kerusakan komponen dan perangkat sistem.
  • Seite 214: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Seite 215: Declaration Of Conformity

    13848 Magnolia Ave, Chino, CA91710 Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard X299 Steel Legend Model Number : Conforms to the following speci cations: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Seite 216: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) X299 Steel Legend/ ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Inhaltsverzeichnis