Installation - Swim & Fun Easy pH Bedienungsanleitung

3

INSTALLATION

Important
Before proceeding with installation of the appliance, it is very important to check the fol-
lowing points:
• The installation area must be dry and adequately ventilated, protected from rain, splashing,
water spray and UV-radiation.
• Be sure to keep the container with the pH corrector product in sufficient distance from all electri-
cal equipment and all other chemical products. Non-compliance with these instruction will lead
to abnormal oxidation of the metallic parts, which can lead to the collapse of the appliance.
• Installation of Easy pH with accessories must be carried out in accordance with the following charts.
The appliance is designed to work exclusively in sour mode (pH minus injection).
Chart
Fitting of the adjustment sleeve on a flexible hose ø 38
1) Place the 2 hose clamps on the hose ends.
2) Mount a hose adaptor on each end of the adjustment sleeve.
3) Connect the hoses and tighten the clamps
44
MV-1815-4-2018 . © All rights reserved Swim & Fun Scandinavia ApS
UK