Use - Swim & Fun Easy pH Bedienungsanleitung

UK
Maintenance advises
Never use hydrochloric acid. Only use a pH corrector product which is recommended
by your professional.
The use of any other chemical product can lead to irreversible damage to the device.
5

USE

CHECK THE WATER PARAMETERS
When installing the device and for every new season using the device. It is necessary and impor-
tant to check if the following parameters are correct:
State of the water
TAC / TH
Be careful
The non compliance with these recommendations will involve inevitably a misuse of the
device, which may entail the annulation of the guarantee.
Preferably use water from the public water supply. Avoid using any water from natural
sources (rain, run off water, reservoirs, and wells).
Important:
For the protection and longevity of the equipments of your pool, it is important to
respect the instructions of use mentioned in this manual literally. In spite of the smooth
running of the controller box device, other factors may cause damage, in particular:
• an insufficient ventilation in case of a covered pool (shelter, tarpaulin, cover)
• a maintenance default of analysis probes (calibration, addition of the consumable...)
• manual use of supplements excessively or not adapted
• the non compliance with the instructions of use described in the present user manual
MV-1815-4-2018 . © All rights reserved Swim & Fun Scandinavia ApS
Clear, free from seaweeds and sediments.
Stabilized between 7.0 and 7.4
Important: The efficiency of the chlorine decreases very quickly with the
pH
increase of the pH and the scale deposits appear all the more fast as the pH
rate is high or unstable.
The water must be correctly balanced (TAC, TH) :
•
•
The TAC (Permanent Hardness) indicates the bicarbonates rate dissol-
ved in water.
The TH, indicates the hardness of water, and at the same time the con-
tent in salts like calcium or magnesium dissolved in the water.
47