Beko CEG5331X Bedienungsanleitung Seite 34

6
Troubleshooting
Problem
The touch buttons are not
sensitive
The appliance takes too long
time to warm up.
The water tank is removed /
the water level is very low in
the water tank but have no
alert.
Internal drip tray is filled with a
lot of water.
Coffee is delivered too slowly
or a drop at a time.
Lack of bean indicator flashes
but there is still a lot of coffee
bean inside the container.
No milk foam out from the
machine
34 / EN
Cause
Not pressing the touch button
from the front direction of the
appliance
Excessive scale has built up.
The area near the water tank
connector is wet.
Coffee powder too fine which
block the water to come out.
Coffee powder too fine which
block the water to come out.
Internal coffee powder outlet
is blocked.
The automatic milk frother
is dirty or not assembled or
installed correctly
Fully Automatic Coffee Machine / User Manual
Solution
Press the lower bottom part of
the icon of the touch button
from the front direction of the
appliance.
Descale the appliance.
Wipe the water around the
water tank connector
Adjust the coffee fineness
to bigger dot during grinder
operation.
Adjust the coffee fineness
to bigger dot during grinder
operation.
Follow the steps in Cleaning
the coffee powder outlet.
Clean the automatic milk
frother and make sure it
is correctly assembled or
installed.