Hilti POS 150 Bedienungsanleitung Seite 24

▶ When the product is brought into a warm environment from very cold conditions, or vice-versa, allow it
to become acclimatized before use.
▶ Keep the laser exit window clean in order to avoid measurement errors.
▶ Observe the accident prevention regulations applicable in your country.
▶ Use the product only within its specified limits.
▶ Precautions must be taken to ensure that the laser beam does not unintentionally strike highly reflective
surfaces.
▶ Precautions must be taken to ensure that persons do not stare directly into the beam.
▶ The laser beam must not be allowed to project beyond the controlled area.
▶ Switch the laser tool off when it is not in use.
▶ When switching distance measurement from prism measurement to reflectorless measurement, make
sure that you do not look at the objective lens of the tool.
▶ View the tool at an angle when setting it up with the aid of the circular bubble level.
▶ Laser beams should not be projected at eye height.
▶ The specified operating and storage temperatures must be observed.
2.4 Electromagnetic compatibility
Although the tool complies with the strict requirements of the applicable directives, Hilti cannot entirely rule
out the possibility of interference to the tool caused by powerful electromagnetic radiation, possibly leading
to incorrect operation. Check the accuracy of the tool by taking measurements by other means when working
under such conditions or if you are unsure. Likewise, Hilti cannot rule out the possibility of interference with
other devices (e.g. aircraft navigation equipment). The tool complies with the requirements of Class A; the
possibility of interference occurring in a domestic environment cannot be excluded.
Only for Korea: This laser range meter is suitable for commercial and industrial use and for the electromagnetic
radiation encountered in this field (Class A). Users must pay attention to this point and make sure that this
laser range meter is not used in a domestic environment.
3 Description
3.1 Total station front
3.2 Total station rear side
Radio antenna
∙
Battery compartment lock
$
Battery compartment
£
Circular bubble level
|
3.3 POC 100 3
Key
Display
@
Control panel
;
18 English
Printed: 24.04.2018 | Doc-Nr: PUB / 5153826 / 000 / 03
1
2
Grip
@
Focusing knob
;
Vertical drive
=
Horizontal drive
%
Tripod lock
&
Sight
(
Telescope with laser distancer
)
Lens
+
Guide light
§
Operator keyboard
/
Display
:
Eyepiece
¡
Tripod screw
Q
Laser plummet
W
Charging socket
=
2035736
*2035736*