English
3
Scope of Delivery
3.1 Basic Device
The compact heat pump is supplied complete with all of the im-
portant components of the heating circulation system:
Expansion vessel
Heat circulating pump
Overflow valve and safety components (pressure relief
valve, pressure gauge)
The refrigeration circuit is "hermetically sealed" and contains
the fluorinated refrigerant R410A included in the Kyoto proto-
col. Information on the GWP value and CO
refrigerant can be found in the chapter Device information. The
refrigerant is CFC-free, non-ozone depleting and non-combus-
tible.
1)
Evaporator
2)
Ventilator
3)
24 l expansion vessel
4)
Switch box
5)
Liquifier
6)
Compressor
7)
Overflow valve
8)
Heat circulating pump
9)
Buffer tank
10) Filter dryer
11) Inspection window
12) Expansion valve
EN-4
3.2 Switch Box
The switch box is located in the heat pump. It can be accessed
by removing the lower front cover.
The switch box contains the supply connection terminals, as
well the power contactors, the soft starter unit and the heat
pump manager.
The heat pump manager is a convenient electronic regulation
and control device. It controls and monitors the entire heating
system on the basis of the external temperature, including hot
water preparation and safety systems.
The customer must install the external temperature sensor,
which is included in the scope of supply of the heat pump man-
equivalent of the
ager together with the necessary fixing accessories.
2
The enclosed operating instructions describe the function and
use of the heat pump manager.
3.3 Accessories Pack
Contents:
2
3
3
6
1
1
2
2
2
4
1
452161.66.01 · FD 9912
Sealing rings for duct connection
1" connecting hoses
1" double nipples
1" flat gaskets
1" sealing plug
Hose nozzle for filling and drain cock
Fixing brackets
10-mm dowels
8 x 80 screws
M4 x 8 screws
External sensor
LIK 8TES
www.gdts.one