Technical Data - EdilKamin FIRETRONIX series Installations-, Betriebs- Und Wartungsanleitung

Heating air
-
natural convection (N)
air from the room enters the fireplace through the side inlets at the bottom, is heated and subsequently rises through the cham-
ber, after which it leaves the fireplace through the pipe unions located on top of the outer shell.
Air intake covers on the outer shell must be removed for this system and the covering must leave sufficient space for air to be hea-
ted to pass through easily.
-
forced ventilation (V)
Unlike the natural convection model, the forced ventilation model is equipped with an 800
-
CONVERSION KIT
Kits are available to convert fireplaces from natural convection (N) to forced ventilation (V).
Hot air ducting kit
To facilitate installation of a hot air distribution system, Edilkamin has prepared a kit containing everything you may need for
dealing with various situations, from the simplest to the most complicated.
kit due bis
1 room + fireplace room

Technical data

output power
nominal wood consumption
efficiency
CO emissions
flue gas flow
flue gas temperature
minimum pressure
smoke outlet Ø
air intake Ø
fan flow rate
weight excl. packaging / incl. packaging
heatable volume
N: natural convection - V: forced ventilation
Ø 20
22
kit tre bis
2 rooms + fireplace room
ARC
87
m
kit quattro bis
3 rooms + fireplace room
ARC / POLI
N
kW 11 11,5
kg/h 3,5 3,5
% 74
% 0,11 0,10
g/s 16 16,3
°C 228 220
Pa 12
cm 20
cm 12,5 12,5
m 3 /h - 800
kg 262 / 292 265 / 295
m 3 270 297
POLI
87
fan.
3 /h
kit cinque bis
4 rooms + fireplace room
LINE
V N
12,7
4
76 74
0,11 0,10
18 18,4
261
12 12
20 20
12,5 12,5
-
281 / 311 284 / 314
324
LINE
96
V
13
4
76
254
12
20
800
351