Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - SOLIS PRIMAROMA Typ 1010 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PRIMAROMA Typ 1010:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TRO UBLES H OOTING
s
Problem
Possible cause
Coffee doesn't run
Machine is not switched
through.
on or power plug is not
plugged in.
Water tank is empty.
Coffee is ground too
GB
finely.
Too much coffee in filter
insert.
Ground coffee is tamped
too strongly.
Filter insert is clogged up.
The appliance is set to
steam extraction (white
control light flashes or
lights up).
Coffee runs
Coffee is ground too
through too
coarsely.
quickly.
Too little coffee in filter
insert.
Ground coffee is not
tamped strong enough.
Coffee is cold.
Cups not pre-warmed.
Milk not hot enough
(for Cappuccino or Caffè
Latte).
Water is pooled
The drip tray is filled with
under the espresso
water.
machine.
The espresso machine is
faulty.
The espresso tastes
No rinsing process
of descaling
was performed after
solution or sour.
descaling.
The ground coffee was
stored in a warm, humid
room for extended
periods of time and is
spoiled.
88
Solution
Make sure that the power plug is
plugged in, the ON/OFF button has
been pressed and the red and green
control light are lit up.
Fill water tank.
Ensure appropriate degree of grinding.
Ensure appropriate amount.
Tamp ground coffee less strongly.
Clean the filters.
Switch the appliance to coffee extrac-
tion and wait for the green control
light to light up permanently (please
refer to the table on page 75).
Ensure appropriate degree of grinding.
Ensure appropriate amount.
Tamp ground coffee more strongly.
Pre-warm cups with warm water.
The temperature is right when the bot-
tom of the milk jug is too hot to touch.
Empty and clean drip tray.
Contact Solis service center.
Rinse the espresso machine multiple
times as described in "Before first use".
Always use freshly ground coffee and
store the unopened packs in a cool, dry
room. After opening, reseal the pack as
airtighly as possible and best store in
the fridge.
Problem
Possible cause
The steam fails to
The white control light
steam the milk.
has not lit up.
The milk jug is too big
or the jug shape is
unsuitable.
You have used skimmed
milk.
Should none of the above-stated reasons apply, please refer to Solis or an authorised
Solis service center.
Solution
Only when the appliance has reached
the right operation temperature for the
steam function it can generate steam.
Therefore, always wait for the white
control light to light up.
Always use a tall and narrow tank, best
made from stainless steel.
Use unskimmed or semi-skimmed milk.
89
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cm4682e-gs.

Inhaltsverzeichnis