SOLIS PRIMAROMA Typ 1010 Bedienungsanleitung Seite 42

– Press the function button again so that it is no longer pushed in and is reset to
brewing function. The green control light flashes quickly.
NOTE: After you have steamed the milk, you should let the espresso machine cool
down (the white control light is off and the green control light lights up permanently)
before making the next espresso, otherwise the espresso might have a slightly
"burnt" taste.
AF TE R MAK IN G
s
ESPRE S S O / CAP P U CCIN O
GB
– After making espresso / cappuccino, switch the appliance off with the ON/OFF
button. All function lights go out. Please note that the ON / OFF button has to be
pressed for at least 3 seconds to switch the appliance off.
– After that, pull the power plug from the socket.
– Return the portafilter handle to the left to INSERT and carefully pull the portafilter
out of the brewing head. CAUTION: Portafilter, filter insert and especially
the coffee dregs mixed with hot water are very hot! Be very careful during
removal, you could scald yourself!
– To knock out the coffee dregs, tilt up the filter insert bracket – like this, the filter
insert will not fall out of the portafilter! Then, turn the portafilter 180 ° degrees
and knock the coffee dregs out of the filter insert. Please dispose of the coffee
dregs in the household waste and do not pour them down the drain, as this might
clog up the wastewater pipes.
– Carefully rinse the filter insert and the portafilter under running water. Dry both
parts with a paper towel.
82
HE A TI NG W A TER O R B EV E R A G ES
s
W I T H T HE STEA M FU N CTI O N
You can use the steam wand to heat up beverages or water and make e.g. tea or
hot chocolate.
Proceed as follows:
– Fill the water tank with fresh water. The MAX marking should not be exceeded.
– Unscrew the steaming nozzle of the steam wand by hand.
– Plug the power plug into the outlet.
– Press the ON / OFF button to switch on the appliance, the red function light will
illuminate.
– Press the function button inwards into the steam position
white temperature control light to light up permanently.
– Dip the steam wand (without steaming nozzle) into the liquid you wish to heat
up, then turn the selector to the right to the steam position
– Once the beverage has reached the desired temperature, return the selector to
the standby position in the center l.
– Press the function button again as well, so that it is no longer pushed in and back
in brewing function. Switch the appliance off with the ON / OFF button by pressing
this button for at least 3 seconds.
– Pull the power plug.
E N ER G Y S A V I N G F UN C TI O N : A U TO M A TI C S HU TD OW N
To save energy, the Primaroma espresso machine will automatically shut down
when it is not used or operated for approx. 10 minutes or longer.
To reactivate the appliance, simply press the ON / OFF button.
GB
and wait for the
.
83