Section 7-Cylinder Fill Times; Troubleshooting - Invacare HomeFill HF2RE9 Benutzerhandbuch

SECTION 7—CYLINDER FILL TIMES
NOTE: All filling times are approximate and may vary on environmental conditions.
NORMAL
CYLINDER
FILLING TIME:

Troubleshooting

If Cylinder fails to function, consult the Troubleshooting guide. If problem
cannot be corrected, consult your Dealer/Home Care equipment provider.
PROBLEM
No flow.
Cylinder will not fill.
Part No 1167426
SECTION 7—CYLINDER FILL TIMES
With Concentrator Flow Rate to Patient:
(Platinum 5 and Platinum S Series up to 2.5 L/min)
(Perfecto
(Platinum 9 up to 5.0 L/min)
POSSIBLE CAUSE
1. Regulator in "Off"
position.
2. Cylinder empty.
3. Dial not set at
increment.
4. Kinked or blocked
cannula.
1. Cylinder valve closed.
23
Series up to 2.5 L/min)
2
2 hr 20 min
SOLUTION
1. Set to prescribed
setting.
2. Replace/fill cylinder.
3. Set dial so indicator points
to a setting.
4. Check to see if the
cannula is kinked.
1. Open cylinder valve.
HomeFill
®