Switching On/Off; Display And Keyboard - Mettler Toledo IND970 Kurzanleitung

1.3.

Switching On/Off

The device can be switched on and off (shut down) or placed in standby as follows:
Only after the IND970 has been completely shut down or a corresponding message appears
may the power plug be pulled out or the voltage supply disconnected.
1.4.

Display and Keyboard

The IND970 is equipped with a back-lit, active color TFT display. The resolution of the IND970-
15 is 1280 x 800 pixels at a size of 15.4" (39.1 cm). Weight information can be displayed in
a variety of formats, including single- or multi-scale display with or without a tare window.
All IND970 models feature an integrated touchscreen and can be operated exclusively via this
screen. In the display layout, the area at the very top is reserved for the system toolbar. It can
display general data as well as configurable status icons. Next is the weight display with all the
relevant weighing information. The middle section of the display is reserved for status messages
and special applications. The bottom section contains the areas reserved for DeltaTrac, and the
softkeys are arranged underneath.
Eight softkeys can be configured to enable a variety of integrated functions of the IND970,
ranging from setting the time and date to accessing specific memory tables, and including
special scale functions of the IND970.
Eight function keys are arranged below the screen. The operator can use these keys to navigate
through the setup options in the menu structure, and within setup and application screens.
IND970-15 only: The numeric keypad is used for entering data. The numeric keys are located
at the top right side of the front panel of the terminal. Alphanumeric data can be entered via the
softkeys or via an external USB keyboard or scanned in from a barcode reader or other external
device.
30515806 | 01 | 07/2019
Switching on
Switching off (shutdown)
METTLER TOLEDO IND970 PC for Industrial Applications Quick Guide, CEU
IND970-15/19
Insert the power plug. The power LED will flash. Press
until a beep sounds. The IND970 will start up, and the
power LED will be lit constantly.
From the System menu, press Shutdown. The IND970
automatically exits the application and shows the windows
desktop.
Press and the terminal will shut down.
3