Models Cr, Cs, Sg, Sm; Electrical Connection; Operation - Franke CM 65 M Installations- Und Gebrauchsanweisung

EN

Models CR, CS, SG, SM

(Fig. 6d)
Fit the appliance in the compartment; fix the oven
X X
to the cabinet with the 4 screws and the 4 bushings
provided, using the holes prepared in the side panels
(Fig. 6d).
Note: Applies to all models (Fig. 6e) if the oven is
to be fitted under a cooktop, firstly turn the top
connection (R) to the right or left so that the oven fits
properly (Fig. 6e).

Electrical connection

FRANKE ovens are supplied with a three-pole power
cable with free terminals. If the oven is permanently
connected to the power supply, install a device that
ensures disconnection from the power supply, with
a contact opening distance (at least 3 mm) enabling
complete disconnection in category III overvoltage
conditions.

OPERATION

This oven combines the advantages of "static"
natural convection ovens with those of modern "fan"
ovens. It is a very versatile appliance which enables
safe and easy selection of 6 different cooking
methods. Use knobs (A) and (D) on the control panel
to select the required programmes and temperature.
For best use of your FRANKE oven, consult the
cooking table on page 13.
Cooling fan
In order to reduce the temperature at the door,
control panel and sides, the FRANKE oven is
equipped with a cooling fan which is automatically
activated when the oven is hot. When the fan is on,
air blows from the front of the oven between the
front panel and oven door; special attention has
paid to ensure that the exiting air does not disturb
the kitchen environment and that noise is kept to a
minimum.
Make sure:
9 The plug and socket are suitable for a 16 A current.
9 Both can be easily reached and are positioned so
that no live part is accessible when inserting or
removing the plug.
9 The plug can be easily inserted.
9 The oven does not rest against the plug when
installed in the cabinet.
9 The terminals of two appliances are not
connected to the same plug.
9 A 3 x 1.5 mm² cable type H05VV-F is used when
replacing the power cable.
9 Make sure you observe the polarities of the free
terminals.
BLU
Brown = Live
BLUE
GIALO-VERDE
Blue = Neutral
YELLOW-GREEN
Yellow/Green = Earth
MARRONE
BROWN
L N
Note:
Make sure the characteristics of the household
electrical system (voltage, maximum power and
current) are compatible with those of your FRANKE
oven.
The mains frequency is established at switching on.
To protect kitchen units, the fan keeps running
after cooking until the oven has cooled down
sufficiently.
Oven light
This symbol corresponds to switching on of the
oven light without activation of any type of heating.
This option is useful for cleaning the oven when it is
switched off, to see the cooking compartment.
– 8 –