Maintaining And Cleaning; Maintaining; Replacing Of The Glass In Case Of Damage; Cleaning - Videotec HGV Bedienungsanleitung

7 Maintaining and cleaning

7.1 Maintaining

7.1.1 Replacing of the glass
in case of damage
Loosen the 5 nuts.
Fig. 23
Extract the external glass plate from the inner one.
Fig. 24
Replace the plate with glass in
place of the one damaged.
Fig. 25
Reassemble the whole set in reverse as compared
with the dismantling and re-fasten the 5
nuts with a tightening torque of 1,6Nm.

7.2 Cleaning

7.2.1 Window and plastic
cover cleaning (PC)
Surface dirt should be rinsed away with water and
then the window cleaned with a neutral soap diluted
with water, or specific products for spectacle lens
cleaning. These should be applied with a soft cloth.
Avoid ethyl alcohol, solvents,
h
hydrogenated hydrocarbide, strong
acid and alkali. Such products may
irreparably damage the surface.
8 Disposal of waste
materials
This symbol mark and recycle system
n
are applied only to EU countries
and not applied to the countries
in the other area of the world.
Your product is designed and manufactured
with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed
of separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.

9 Technical specifications

9.1 General

Base in aluminium, epoxypolyester powder painting,
RAL9002 colour
Upper body and sunshield in ABS
Stainless steel external screws
Supplied with instruction manual, desiccant bag,
accessories for camera and lens mounting

9.2 Mechanical

Plate with 4xM16 cable glands (in addition a stainless
steel plate is supplied for customized drilling)
Glass window: see drawing
Internal usable area: see drawing
Unit Weight: 9.2kg / 20.2lb
9