IKEA DYNAMISK Bedienungsanleitung Seite 18

ENGLISH
Problem
The compressor oper-
ates continually.
Water flows on the rear
plate of the refrigera-
tor.
Water flows into the re-
frigerator.
Water flows on the
ground.
There is too much frost
and ice.
The temperature in the
appliance is too high.
The temperature in the
refrigeration is too high.
The temperature in the
freezer is too high.
Possible cause
The Temperature regulator
may be set incorrectly.
The door is not closed cor-
rectly.
The door has been opened
too frequently.
The product temperature is
too high.
The room temperature is too
high.
The Fast freezing function is
switched on.
During the automatic defrost-
ing process, frost defrosts on
the rear plate.
The water outlet is clogged.
Products prevent that water
flows into the water collector.
The melting water outlet does
not flow in the evaporative
tray above the compressor.
Food products are not wrap-
ped properly.
The door is not closed cor-
rectly.
The Temperature regulator
may be set incorrectly.
The door is not closed cor-
rectly.
The product temperature is
too high.
Many products are stored at
the same time.
There is no cold air circula-
tion in the appliance.
Food products are too near
to each other.
Solution
Set a warmer temperature.
Refer to "Closing the door".
Do not keep the door open
longer than necessary.
Let the product temperature
decrease to room temperature
before storage.
Decrease the room tempera-
ture.
Refer to "Fast freezing func-
tion"
This is correct.
Clean the water outlet.
Make sure that products do
not touch the rear plate.
Attach the melting water outlet
to the evaporative tray.
Wrap the food products bet-
ter.
Refer to "Closing the door".
Set a higher temperature.
Refer to "Closing the door".
Let the product temperature
decrease to room temperature
before storage.
Store less products at the
same time.
Make sure that there is cold
air circulation in the appliance.
Store food products so that
there is cold air circulation.
18