Audio Input - TechniSat DIGITRADIO 360 CD Bedienungsanleitung

The MP3/WMA files are read and shown on the display in the form of the total number of tracks and
albums.
Do not start the operation until the content has been read completely, to ensure that all the required
information on the memory medium has been read.
If no memory medium has been connected or it cannot be read, No USB appears on the display.
If there is no playback, the

10 Audio input

You can play sound on an external device via the
> Connect the external device using the AUDIO IN connection (3.5 mm jack) on the front of the
DIGITRADIO 360
> As described in section 4.4.5, select the AUX source.
DIGITRADIO 360 CD
display. The shutdown process can be aborted using the INTRO button on the remote control.
For optimum volume setting, use the volume control on the radio as well as the one on the connected
device.
DIGITRADIO 360 CD
CD.
shuts down automatically after 4 hours in AUX mode. This is indicated on the
switches to standby after 15 minutes.
DIGITRADIO 360 CD speaker.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
45 45