Herunterladen Diese Seite drucken

Cleaning - Bosch HEZ39050 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für HEZ39050:

Werbung

en
Changing the battery:
Remove the silicone cover from the
1.
lower section of the temperature
sensor housing and remove both
screws using a screwdriver.
Open the closure of the temperature
2.
sensor. Remove the battery from the
lower section of the housing and
insert a new battery (pay attention to
the correct orientation of the battery
poles).
Caution!
Do not use any metal objects to
remove the battery. Do not touch the
battery connection points.
12
Close the closure of the temperature
3.
sensor (the notches for the screws
on the closure must align with the
notches on the lower section of the
housing). Tighten the screws with a
screwdriver.
Reattach the silicone cover to the
4.
lower section of the temperature
sensor housing.
Note:
Use only high-quality batteries of the
type CR2032 in order to guarantee a
long service life.

Cleaning

Temperature sensor
Clean the temperature sensor with a
damp cloth. Never clean it in the
dishwasher. Do not immerse it in water
or clean it under running water.
Remove the temperature sensor from
the saucepan after cooking. Store it in a
clean, safe place (such as in its
packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the
temperature sensor. Dishwasher safe.

Werbung

loading