Getting Started; Charging The Power Bank - Silvercrest SPB 2.600 C1 Bedienungsanleitung Und Serviceinformationen

Getting started

The power bank must never be charged and be
used to recharge an external device at the same
time.

Charging the power bank

Because of its high input current, never use a
notebook or PC to charge the power bank, only use
a suitable power adapter (5 V
To charge the built-in battery of your power bank, use the
supplied USB charging cable (B) to connect the power bank to
a suitable USB power adapter (not supplied). To do so, insert
the Micro USB plug of the USB charging cable (B) into the
power bank Micro USB socket (7) and then connect the USB
plug to the USB port of the power adapter. During the
charging process, the LEDs (2, 3, 4, 5) inform you about the
current state of charge of the power bank.
LED indicator
One LED flashes
One LED flashes, one LED on
One LED flashes, two LEDs on
One LED flashes, three LEDs on
All LEDs on
SilverCrest SPB 2.600 C1
, min.1A).
State of charge
0 - 24%
25 - 49%
50 - 74%
75 - 99%
100%
English - 11