Fast Forward And Rewind - JGC MS450-3CD Bedienungsanleitung

The TAPE B is used for playback only. The TAPE A is used for both, recording and
playback.
Do not turn the unit off while the tape is running. Otherwise, the pinch roller may be
damaged.
PLAYBACK (DECK A & B)
1. Press STANDBY/ON to switch-on the unit.
2. Press TAPE button to select TAPE mode.
3. Press the appropriate STOP/EJECT button and insert a pre-recorded cassette.
4. Press the PLAY button to start playback.
5. Adjust the VOLUME controls to the desired sound level and sound equalization.
6. Press the STOP/EJECT button to stop playback at any time. When the end of the tape is
reached, the automatic stop will be activated.

FAST FORWARD AND REWIND

For fast winding or rewinding the tape, press the F.FWD or REW button. Press the STOP/EJECT
button when the desired location has been reached. When the end of the tape has been reached,
the reels will stop. Then the STOP/EJECT button should be pressed.
PAUSE
Press the PAUSE button to momentarily suspend tape travel during recording or playback.
Repress the PAUSE button for pause released and recording or playback restart.
Pause control does not function during fast forward or rewind.
CONTINUOUS PLAYBACK (DECK A TO DECK B)
This unit enables you to play continuously from
DECK B to DECK A.
1. Press STANDBY/ON to switch-on the unit.
2. Press TAPE button to select TAPE mode.
3. Insert pre-recorded cassettes to DECK A
and DECK B compartments.
4. Press the PAUSE button and PLAY button
of DECK B.
5. Press the PAUSE button and PLAY button
of DECK A.
6. Release the PAUSE button of DECK B,
DECK B will start playing. When DECK B
reaches the end of the tape, DECK B will
automatically stop and then DECK A will
start playing automatically.
7. Adjust the VOLUME controls to the desired
sound level and sound equalisation.
TAPE DECK
26