Repeat Mode; Random Play; Intro Scan - JGC MS450-3CD Bedienungsanleitung

REPEAT MODE

Press the repeat button before or during play. A single track, single folder (MP3 only) or all the tracks
can be repeated. Press the button for the repeat mode as follows:
AUDIO CD
NORMAL ALL DISC
REPEAT MODE
NORMAL PLAY
REPEAT ALL DISCS
REPEAT SINGLE DISC
REPEAT SINGLE TRACK

RANDOM PLAY

You can listen all the tacks in a random order using this function.
1. Press RANDOM button and RANDOM ALL lights up on the LCD. Tracks from all discs will be played in
random order.
2. Press RANDOM button and RANDOM 1 lights up on the LCD. Tracks from a single disc will be played in
random order.
3. Press STOP or RANDOM button to cancel the random mode.
CD PROGRAMMING
Up to 60 tracks can be programmed for disc play in any sequence. Before using, be sure to press the STOP button
first.
1. Set in CD mode.
2. Press the MEM/CLOCK button. MEMORY will appear on the LCD display. The program number and the digits
for track number are displayed.
3. Press DISC SKIP or DISC 1/2/3 to select a disc.
4. Select a desired track by pressing SKIP +/- buttons.
5. Press the MEM/CLOCK button to store the track into memory.
6. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
7. When all the desired tracks have been programmed, press the PLAY/PAUSE button to play the disc in the order
you have programmed.
8. Press the STOP button to terminate program playing.
- The programming will automatically stop if no button is pressed within 10 seconds.

INTRO SCAN

Press INTRO button to select intro scan mode. every track will be played for only 10 seconds.
To return to normal playback, press INTRO again. Intro mode is indicated by INTRO in the
display
TRACK / TIME DISPLAY
Press REMAIN to select disc time display mode: elapsed track time, remaining title time, remai-
ning tracks and time of the disc or elapsed tracks and time of the disc.
ONE DISC ONE TRACK
DISPLAY
ALL
REP. ALL / DISC
REP. 1 / DISC
REP. 1
CD PLAYER
24