Stop Playback - JGC MS450-3CD Bedienungsanleitung

CD PLAYER
LOAD A CD
1. Press CD button to select CD player mode.
2. Press OPEN/CLOSE to open the CD tray.
3. Load a disc with the label facing up into one of the two visible tray positions. to select the third tray
position, press DISC SKIP to rotate the tray
4. Press OPEN/CLOSE to close the CD tray.
5. The player will start to check for inserted disc in each position and the load the first disc.
PLAY/PAUSE
1. Press the PLAY/PAUSE button to start playback. The first track will be played and the TRACK NO.
will appear on the LCD display.
2. To interrupt, press the PLAY/PAUSE button once. The current playing time will flash on the LCD
display. Press the button again to resume playback.
3. If the end of a disc is reached, playback will continue from the next cd.

STOP PLAYBACK

1. If STOP button is pressed during play or pause mode, CD play will go to stop mode.
TRACK SKIP / SEARCH MODE ( SKIP+/- & CD/TUNING +/- )
1. During PLAY or PAUSE mode: If the SKIP+ button is pressed, it will go to the next track and dis-
play the track No. and then remain in the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode: if the SKIP- button is pressed, it will go back to the beginning of
the track and display the original track No. while remaining in the PLAY or PAUSE mode.
3. After step 2, press SKIP- button again. It will go to the previous track and remain in the PLAY or
PAUSE mode. Note: press and hold the button to activate the search function.
NOTE: press and hold the button to activate the search function.
23