Stop Mode - Jgc Rrmp-3400 Bedienungsanleitung

CD PLAYER
PLAYING THE COMPACT DISC
•
GETTING STARTED
1. Slide the switch to CD.
FUNCTION
2. Open the CD cover by pushing gently on the marked spot
3. Place a music disc with the printed side facing up inside the tray.
4. Close the CD cover by pushing it down on the marked spot until it locks.
5. After reading the CD, the display will show the total number of tracks and playing time.
•
PLAY / PAUSE MODE
1. Press the
CD PLAYPAUSE
display.
2. To interrupt, press the
CD PLAYPAUSE
resume playback.
•

STOP MODE

1. If button is pressed during play or pause mode, CD play will go to stop mode.
STOP
•
SKIP / SEARCH MODE (
1. During PLAY or PAUSE mode: If the
remain in the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode: if the
original track No. while remaining in the PLAY or PAUSE mode.
3. After step 2, press
and hold the button to activate the search function.
•
FOR MP3 DISC
1. Press buttons on the remote control to select the album No.
FOLDER
2. Press or buttons to select the track No.
3. When the desired track is selected, press the
REMARK:
•
MP3 playing performance will vary in quality depending on the condition of the disc being played, and how it was recorded.
Lead time for a MP3 - CD is longer than normal CD's due to the difference in the way it is formatted.
20
button to start playback. The first track will be played and the TRACK NO. will appear on the LCD
button once. The play symbol will flash on the LCD display. Press the button again to
/ )
button is pressed, it will go to the next track and display the track No. and then
button is pressed, it will go back to the beginning of the track and display the
button again. It will go to the previous track and remain in the PLAY or PAUSE mode. Note: press
CD PLAY/PAUSE
button to start playback.