Resetting The Camera; Motion Detection - Sygonix SY-SCW-800 Bedienungsanleitung

c) Resetting the Camera
Insert the included reset pin into the reset hole (14).
•
• Press down until you feel a "click" then hold 4-5 seconds.
• Stop pressing when you hear the voice prompt "system reset ...".
If you continue to press and hold reset after the prompt has sounded, the device will
power off.
d) Motion Detection
The device uses two types of motion detection (PIR and radar). The sensors need to be
triggered before the camera sends motion detection alerts.
• The PIR sensor responds to temperature changes within the detection range e.g. humans
or animals whose temperatures differ from the ambient temperature. Position the sensor
so the object does not walk directly towards it, but crosses from left to right or vice versa.
• The radar uses the Doppler effect. A low power microwave is transmitted from the device
and a receiver detects any changes in frequency between the original signal and the signal
reflected by the moving object. Radar waves can detect movement coming straight towards
it.
• When motion is detected, a push alarm notification will be sent to your mobile device.
- With microSD inserted: 15 second clips will be saved.
- No microSD inserted: Will only receive push notification, and can then open the app to
view live video (with option to save to mobile device memory).
34