Operation; A) Switch The Camera On; B) Reset Device / Enter Pairing Mode - Sygonix SY-VS-400 Bedienungsanleitung

13. Operation

a) Switch the camera on

• Open the main compartment cover (8) and turn the battery
switch to the ON position.
If the camera has not been paired with the app:
The status LED (3) will flash red.
•
Refer to the application manual for information about
how to pair the camera with your mobile device.
If the camera is already paired with the app:
• The LED status indicator flashes green then turns solid green.
• The camera will function as usual.

b) Reset device / enter pairing mode

Reset the camera if it is not working correctly or you would like to
enter pairing mode.
• Open the rubber compartment cover (6).
• Insert the included pin into the reset hole.
• Press down until you feel a "click" and hold until you hear
audio prompt.
42