Enerpac WalkPac Bedienungsanleitung Seite 4

Hydraulic Connections
Connect a hose from the pump to the tool.
Hand tighten couplers (C) fully to ensure that all connections are tight and leak free.
C
Front
Oil Level
Place pump on level surface. Unscrew the vent/fill cap (D) to expose the reservoir fill
port. Add only Enerpac hydraulic oil. The reservoir is full when the oil level reaches
the lip (E) in the neck of the fill port.
IMPORTANT: Add oil only when the tool is fully retracted, or the system will contain
more oil than the reservoir can hold, causing oil to leak from vent/fillcap.
Illustration 1
C
Illustration 2
E
Illustration 3
4
A
Side
D