Initial Commissioning; Commissioning; Prior To Switching On The First Time; Language Selection In Windows - Bosch BEA 950 Originalbetriebsanleitung

en 20 | BEA 950 |
4.

Initial commissioning

4.1

Commissioning

i
The scope of commissioning depends on the pro-
duct variant ordered.
1. Remove the packaging from all components sup-
plied.
2. Fit mounting for BEA 070 (fig. 5, item 2) to the trolley.
!
The mounting must always be attached firmly to
the trolley to prevent the suspended BEA 070 from
dropping.
2
1
Abb. 5: Fix the mounting bracket
1 BEA 070
2 Mounting
3. Attach BEA 070 (fig. 5, item 1) in the mounting and,
if wished for, plug the USB connection cable on the
BEA 070 and USB port to the front of the computer
(fig. 1, item 9).
4. Connect power supply cable to the BEA 070 and to
the socket strip (fig. 1, item 10 or fig. 4, item 6).
5. Connect sensors, exhaust gas sampling probe and
adapter cables to their intended slots on BEA 030,
BEA 055, BEA 070, and KTS module (see the rele-
vant operating instructions).
!
The voltage supply for KTS 560 or KTS 590 must be
connected by means of the barrel connector with label
"⌀2.5 KTS560" on the trolley. The voltage supply for
other KTS modules or BEA 030 must be connected by
means of the barrel connector with label "⌀2.1".
6. Remove transportation safeguards from laser printer
in accordance with the enclosed instructions. Place
laser printer (fig. 1, item 7 or fig. 3, item 3) in the
trolley and connect it. Power supply cable and USB
connecting cable are provided in the trolley, ready to
be connected.
"
BEA 950 is ready for operation.
1 689 989 441 | 2019-07-01
4.2

Prior to switching on the first time

The voltage supply is provided by the mains voltage sys-
tem. BEA 950 is set to 220 VAC $ 240 VAC, 50/60 Hz.
i
The BEA 950 with the "Medium" trolley (product ver-
sion 0 684 123 359) is designed for a voltage supply
of 110 VAC $ 240 VAC, 50/60 Hz.
Note the relevant information on the label on the front
of the EPS BEA 950.
!
Before commissioning, ensure that the voltage in the
mains voltage system matches the voltage setting
of BEA 950. If BEA 950 is operated outdoors, we
recommend using a voltage source that is protected
by a ground fault interrupter (GFI).
i
The laser printer is designed for a voltage supply of
220 VAC $ 240 VAC, 50/60 Hz.
4.3

Language selection in Windows

When the unit is switched on for the first time, select
the language of the Windows operating system from the
menu and follow the on-screen instructions (see "Com-
puter" operating instructions).
i
The language cannot be changed later any more. If
this proves necessary, please contact your Bosch
authorized dealer.
4.4 Commissioning of BEA 030, BEA 055,
BEA 070 and KTS module
Commissioning of BEA 030, BEA 055 and BEA 070 is
described in the enclosed operating instructions and in
the Online Help from CDC. The enclosed operating in-
structions and the Online Help from DDC describe the
commissioning of the KTS module. Commissioning of
the laser printer is described in the enclosed operating
instructions.
Robert Bosch GmbH