Indoor Unit Fixing; Drainage; Remote Control - Carrier 42ADF025 Installationsanweisung

42ADF025, 42ADF035

Indoor Unit Fixing

• Pass the drain hose, connection cord and piping through the
wall.
So that the unit hides the pipes.
• Hook the panel onto the pegs located behind the indoor unit.
And push the lower part of the panel into the lower hook so
the panel is x ed.
• Check that the indoor unit does not move to prevent noise
during operation.

Drainage

• The hose should be made at a slight downward slant on the
outside.
• Make sure the drain hose is below the drain. Ensure that the
water drains out through the drain hose and that there is no
leakage from the other parts.
• Check the drainage of the unit by pouring some water into the
unit drain pan and ensure that the water drains out throgh the
drain hose and that there is no leakage from the other parts.

Remote Control

• A mounting bracket for the remote control should be installed
on the wall 1 m or more from TV, Radio, wireless phone, or
lights.
• If the infrared signal recevier on the unit is exposed to direct
sunlight, the air conditioner may not work properly.
Draw the curtains to avoid direct sunlight.
• Use the remote control where its signals can reach the
receiver of the air conditioner.
Main Body
Main Body
GB
E N G L I S H
Wall
Hook Here
7