Technical Data; English (Original Instructions) - DeWalt DCH733 Bersetzt Von Den Originalanweisungen

HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER
DCH733, DCH773
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
No-load speed
No-load beats per minute
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in
concrete
Bit holder
Chisel positions
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling
Vibration emission value a =
h, HD
Uncertainty K =
Chiselling
Vibration emission value a = m/s²
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
WALT one of the
e
DCH733 DCH773
V 54 54
DC
1 1
min -1 177–355 145–290
bpm 1350–2705 1105–2210
J 13.3 19.4
mm 25–38 28–42
mm 48 52
mm 40–125 40–150
SDS MAX SDS MAX
24 24
kg 8.6 9.5
dB(A) 97 96
dB(A) 108 107
dB(A) 3 3
m/s² 9.0* 10.1*
m/s² 1.5 1.5
8.8* 9.4*
m/s² 1.5 1.5
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Cordless SDS MAX
Combination Hammer
DCH733, DCH773
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
20.12.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
EnGLIsh
WALT at
e
WALT.
e
27