Jacuzzi Projecta Vorinstallationsblatt Seite 31

The installation of electrical devices and appliances (sockets,
switches, etc.) in bathrooms must comply with the legal require-
ments and standards of each country. In particular, no electrical in-
stallation is permitted within 60 cm of the shower enclosure or at
a height of less than 225 cm
0,6 m
For connection to the electric network of the building, a cable with
a protective sheath having characteristics not inferior to type H 05
VV-F 3x2.5 mm 2 must be used.
The appliance must be powered by a differential cir-
cuit breaker; the operating current must not exceed
30mA. "
Parts which contain electrical components, with the ex-
ception of remote control devices, must be placed or
attached in such a way so they do not fall into the tub.
Powered components and appliances must be accessi-
ble to those persons in the tub.
Jacuzzi ® shower enclosures and "bath/shower combi-
nations" are equipped with a terminal, located on the
frame and identified with the symbol
quipotential connection of the surrounding metal
masses, as required by standards EN 60335.2.60 and
EN 60335.2.105.
ATTENTION! Before carrying out any maintenance
operation, disconnect the appliance from the pow-
er supply line.
0,6 m
to allow for e-
31