Connecting The Dab/Fm Antenna - Teac PD-301DAB Bedienungsanleitung

A
DAB/FM antenna connector
When receiving a DAB/FM broadcast, extend this
antenna and position it for the best reception.
After moving this unit, readjust the position again.
For detailed information about how to make DAB/FM
antenna connections, see page 11.
B
Digital audio output connectors
These output digital audio. Connect these to the audio
input connectors of devices capable of receiving dig-
ital audio.
COAXIAL: RCA coaxial digital cable
OPTICAL: Optical digital cable (TOS)
C
Analog audio output connectors
These output 2 channels of analog audio. Connect a
stereo amplifier or powered speakers to them.
Use RCA audio cables for connections.
Connect the R connector of this unit to the right (R)
connector (or equivalent) of the amplifier and the
L connector of this unit to the left (L) connector (or
equivalent) of the amplifier.
D
DC power connector (DC IN 12V)
After all other connections have been completed,
connect the included GPE015A-120125-D AC adapter
to this connector and connect the AC adapter power
cord to the adapter.
Then, connect the AC adapter power cord plug to an
AC power outlet.
V Do not use any power cord other than the
one included with this unit. Use of other
power cords could result in fire or electric
shock. Unplug the cord from the outlet
when not using the unit for a long time.

Connecting the DAB/FM antenna

Indoor antenna
Connect the included antenna to the antenna connector on
the rear panel and extend the antenna.
Fix the antenna to a window frame, wall or other position
that improves reception the most.
Outdoor antenna
In an area where DAB signals are weak, use an outdoor DAB
antenna.
There are two main types of antennas available.
Multi-element
Dipole
11