Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Remote Control; Installing Batteries; When To Replace Batteries - Teac PD-301DAB Bedienungsanleitung

Cd player/fm tuner
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 104
n
Skip (.//) buttons
Direction (l/;) buttons
When the input source is CD/USB and file mode is
enabled, use to skip to the previous or next track.
When the input source is USB and folder mode is
enabled, use to select files.
When the input source is FM, use to decrease/increase
the frequency received. Press and hold for at least one
second to begin automatically selecting stations.
When the input source is DAB, press to start automatic
station selection.
o
DISPLAY button
Press to change what is shown on the display.
p
MENU button
Press to enter setting mode.
q
FM MODE button
When receiving an FM broadcast, use to switch
between stereo and mono.
r
DIMMER button
Use to adjust the display brightness.
s
CLEAR button
Use to clear programmed tracks.
t
PTY button
Use to search for stations by program type (PTY ).

Using the remote control

Precautions for use
V
Misuse of batteries could cause them to
rupture or leak leading to fire, injury or
the staining of items nearby. Please read
and observe the precautions on page 3
carefully.
o When using the remote control, point it toward the
remote control signal receiver on the main unit from a
distance of 5 m (16 ft) or less. Do not place obstructions
between the main unit and the remote control.
o The remote control might not work if the remote control
signal receiver on the main unit is exposed to sunlight or
bright lights. In this case, try moving the main unit.
o Beware that use of this remote control could cause the
unintentional operation of other devices that can be
controlled by infrared rays.

Installing batteries

Remove the cover on the back of the remote control, and
insert 2 AAA batteries into the case, aligning them with the
¥ and ^ indications. Replace the cover.

When to replace batteries

If the operation range of the remote control decreases, the
batteries have become exhausted. In this case, replace the
batteries with new ones.
Dispose of the used batteries according to the instructions
on them or requirements set by your local municipality.
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis