Specifications - Ingersoll-Rand QS1P33 Betriebsanleitung

LUBRICATION
Ingersoll–Rand No. 10
Always use an air line lubricator with this tool.
We recommend the following Filter–Lubricator–Regulator
Unit:
International – No. C05–02–G29
Whenever the tool is disassembled for maintenance or
repair, lubricate the gear train with Ingersoll–Rand No. 67
Grease.
Whenever the tool is disassembled for maintenance or
repair, lubricate the clutch assembly with Ingersoll–Rand
No. 28 Grease.
Series
QS1P33
QS1P20
QS1P17
QS1P10
QS1P05
QS1P02
H Tested in accordance with PNEUROP PN8NTC1.2
♦ Tested in accordance with ISO8662–7
PLACING TOOL IN SERVICE
Gearing:
Ingersoll–Rand No. 67
Clutch:
Ingersoll–Rand No. 28

SPECIFICATIONS

Free Speed
rpm
3,350
2,000
1,710
1,000
500
250
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
HSound Level
dB (A)
Pressure Power
80.6
80.0
80.6
78.7
80.6
80.6
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
♦Vibrations Level
m/s
– – – 0.9
– – – 0.7
– – – 0.8
– – – 0.9
– – – 0.6
– – – 0.9
2