Product Safety Information; Product Specifications - Ingersoll-Rand 371 Technische Produktdaten

Product Safety Information

Intended Use:
These tools are designed to quickly install or remove assembly fasteners.
For additional information refer to Air Screwdrivers Product Safety Information Manual Form
04585006.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Type of
Model(s)
Handle
371 Pistol
LA412 Pistol
LA413 In-Line
LA439 Pistol
* tested in accordance with PNEUROP PN8NTC1.2
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16578346 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Form 80160179-Edition 1
Drive Free Speed
(inch) (RPM)
1/4 1800
1/4 1800
1/4 1800
1/4 1800
Sound Level dB(A)
(ANSI S5.1-1971)
Pressure
* 94
89.6
88.5
89.9
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
Vibration Level
(ISO 8662)
Power
(ISO 3744)
* 107
102.6
101.5
102.9
m/s
2
0.4
0.8
1.1
1.0
3