Electrical Characteristics - Italiana Camini SIMPLI Installations-, Betriebs- Und Wartungsanleitung

THERMO-TECHNICAL CHARACTERISTICS pursuant to EN 14785
Burned heat output
Thermal power
Yield/Effi ciency
CO emission at 13% O
2
Smoke temperature
Fuel consumption
Minimum draft
Tank capacity
Autonomy
Heatable volume *
Smoke pipe diameter (male)
Air intake pipe diameter (male)
Weight with packaging
TECHNICAL DATA FOR CHIMNEY FLUE DIMENSIONING
Thermal power
Smoke outlet temperature on discharge
Minimum draft
Smoke capacity
* The heatable volume is calculated considering home insulation pursuant to L 10/91 and subsequent amendments and a heating
requirement of 33 Kcal/m³ per hour.
* It is important to also take into consideration the location of the stove in the environment to heat.

ELECTRICAL CHARACTERISTICS

Power supply
Average absorbed power
Absorbed power when switching on
Protection on electronic board *
N.B.
1) take into consideration that external equipment can disturb functioning of the electronic board.
2) attention: intervention on the powered parts, maintenance and/or testing must be carried out by qualifi ed staff.
(before carrying out any maintenance, disconnect the appliance from the electrical power mains)
The data outlined above are approximate and relate to the certifi cation phase carried out by the notifi ed body.
EDILKAMIN s.p.a. reserves the right to change the products without prior notifi cation at its discretion.
CHARACTERSTICS
Nominal power
Nominal power
120
400
- 96
-
Reduced power
7.8
7
90.1
0.019
174
1.6
12 - 5
15
8
180
80
40
120
Reduced power
7
209
0 - 5
5.4
230Vac +/- 10% 50 Hz
W
W
Fuse F4 AL, 250 Vac
2.5 kW
2.4 kW
94.67 %
0.035 %
81 °C
0.5 kg/h
10 - 3 Pa
kg
24 hours
3
m
mm
mm
kg
2.4 kW
97 °C
Pa
2.4 g/s