Specific Safety Rules - Ryobi RCS-3540C Bedienungsanleitung

GB GB
F F D D E E I I
GENERAL SAFETY RULES
7. Use only replacement bars and chains specifi ed by
the manufacturer or the equivalent.
DO NOT OPERATE A CHAINSAW WITH ONE
■
HAND. Serious injury to the operator, helpers, and/or
bystanders may result from one-handed operation. A
chainsaw is intended for two-handed use.
DO NOT OPERATE A CHAINSAW WHEN YOU ARE
■
FATIGUED. Never operate a chainsaw when you are
tired or under the infl uence of medication, drugs, or
alcohol.
USE SAFETY FOOTWEAR. Wear snug-fitting
■
clothing, protective gloves, and eye, hearing, and head
protection devices.
DO NOT STAND ON ANY UNSTABLE SURFACE
■
while using your chainsaw: that includes ladders,
scaffolds, trees, etc.
USE CAUTION WHEN HANDLING FUEL. Move the
■
chainsaw at least 50 feet (15 m) from the refuelling
point before starting the engine.
DO NOT ALLOW OTHER PERSONS to be near the
■
chainsaw when starting or cutting with the chainsaw.
Keep bystanders and animals out of the work area.
DO NOT START CUTTING until you have a clear work
■
area, secure footing, and a planned retreat path from
the falling tree.
KEEP ALL PARTS OF YOUR BODY away from the
■
saw chain when the engine is running.
ALWAYS CARRY THE CHAINSAW WITH THE
■
ENGINE STOPPED AND THE BRAKE ENGAGED, the
guide bar and saw chain to the rear, and the silencer
away from your body. When transporting the chainsaw,
use the appropriate guide bar scabbard.
DO NOT OPERATE A CHAINSAW THAT IS
■
DAMAGED, improperly adjusted, or not completely and
securely assembled. Be sure that the saw chain stops
moving when the throttle control trigger is released.
TURN OFF THE ENGINE before putting the chainsaw
■
down. DO NOT leave the engine running unattended.
As an additional safety precaution, apply the chain
brake before putting down the saw.
USE EXTREME CAUTION when cutting small-size
■
brush and saplings because slender material may catch
the saw chain and be whipped toward you or pull you
off balance.
WHEN CUTTING A LIMB under tension, be alert for
■
spring-back so that you will not be struck when the
tension in the wood fi bres is released.
P P NL NL S S DK DK N N FIN GR HU FIN GR HU CZ RU CZ RU RO PL SLO HR TR EST LT RO PL SLO HR TR EST LT
English English
KEEP THE HANDLES dry, clean, and free of oil or fuel
■
mixture.
OPERATE THE CHAINSAW ONLY in well-ventilated
■
areas.
DO NOT OPERATE A CHAINSAW IN A TREE unless
■
you have been specifi cally trained to do so.
ALWAYS HAVE A FIRE EXTINGUISHER AVAILABLE
■
WHEN USING CHAIN SAW.
FOLLOW THE SHARPENING and maintenance
■
instructions for the saw chain.
USE ONLY THE REPLACEMENT GUIDE BARS and
■
low kick-back chains specifi ed for your saw.
DO NOT adapt your powerhead to a bow guide or use
■
it to power any attachments or devices not listed for
your saw.
SAVE THESE INSTRUCTIONS. Refer to them
■
frequently and use to instruct other users. If you lend
someone this tool, lend them these instructions also.

SPECIFIC SAFETY RULES

WARNING
The warnings, labels, and instructions found in this
section of the operatorʼs manual are for your safety.
Failure to follow all instructions may result in serious
personal injury.
GENERAL PRECAUTIONS
DO NOT CUT VINES and/or small undergrowth (less
■
than 76 mm (3 in.) in diameter).
MUFFLER SURFACES ARE VERY HOT during and
■
after operation of the chainsaw; keep all body parts
away from the muffl er. Serious burns may occur if
contact is made with the muffl er.
ALWAYS HOLD THE CHAINSAW WITH BOTH
■
HANDS when the engine is running. Use a fi rm grip with
thumbs and fi ngers encircling the chainsaw handles.
NEVER LET ANYONE USE YOUR CHAINSAW who
■
has not received adequate instructions in its proper
use. This applies to rentals as well as privately owned
saws.
BEFORE YOU START THE ENGINE, make sure the
■
saw chain is not contacting any object.
OPERATE THE CHAINSAW only in well ventilated
■
areas.
21 21
LV LV SK BG SK BG