General Safety Instructions - Kathrein MSK 105 Betriebsanleitung

FOREWORD/IMPORTANT INSTRUCTIONS
Dear customer,
thank you for choosing the Kathrein MSK 105 meter. Please read the following instructions carefully so
as to familiarise yourself with all the new functions before starting to use your meter.
Please comply with all the instructions in this operating manual. KATHREIN-Werke KG has done all it
can to ensure that the data and descriptions in this operating manual are correct and complete.
We reserve the right to make changes without notice. In particular, this applies to changes made due to
technical advancements.
We would welcome any suggestions for improvements.
Publishing, copying, printing and distribution of this operating manual by electronic means, as a whole or
in part, is only permissible with prior written agreement from KATHREIN-Werke KG.
All product names and brands used in this operating manual are the property of their respective owners.
Note:
VALIDITY OF THIS OPERATING MANUAL
This operating manual is applicable to the MSK 105 meter, article no.: 21710037.
The following instructions are important for operating the meter and should be complied
with in all circumstances.

GENERAL SAFETY INSTRUCTIONS

The MSK 105 has been developed and manufactured in compliance with all relevant
harmonised directives, standards and other technical specifi cations. The product is state-
of-the-art and offers a high level of safety. However, this degree of safety can be only
achieved during operation if the user complies with all necessary safety regulations.
Electronic equipment is not classed as household waste and must be disposed of
properly in accordance with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on used electrical and electronic equipment.
At the end of its service life, take this device for disposal at a designated public collection
point.
2
If LNBs with integrated engineering logic (e.g. Kathrein's UAS 585) are used,
please observe the max. current load of the receiver providing power supply.
Alternatively, you can also use a standard LNB (Kathrein's UAS 571) to align the
antenna.